vs.

      New Holland DC80 vs. New Holland 255

      2 reasons to buy New Holland DC80:

      Standard blade

      Blade angle in both directions 62 degrees and 11 degrees 82 % more or 51 degrees
      Cut depth 590 mm and 530 mm 10 % more or 60 mm

      18 reasons to buy New Holland 255:

      Standard blade

      Volume 7 m3 and 1.5 m3 79 % more or 5.5 m3

      Sizes

      Clearance 460 mm and 419 mm 9 % more or 41 mm

      Operation

      Fuel Capacity 500 l. and 190 l. 62 % more or 310 l.
      Engine oil volume 22 l. and 9.8 l. 55 % more or 12.2 l.
      Cooling system fluid volume 65 l. and 30 l. 54 % more or 35 l.
      Hydraulic system fluid volume 105 l. and 80 l. 24 % more or 25 l.
      Final drive fluid volume 46 l. and 4.5 l. 90 % more or 41.5 l.
      Generator current strength 70 amperes and 63 amperes 10 % more or 7 amperes

      Motor

      Maximum torque 1127.8 Nm and 383.7 Nm 66 % more or 744.1 Nm
      Displacement 8.3 l. and 3.9 l. 53 % more or 4.4 l.

      Hydraulic system

      Pump bandwidth 212 l/min and 54 l/min 75 % more or 158 l/min

      Gear box

      Forward gears number 3 and 2 33 % more or 1
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 10.9 km/h and 10 km/h 8 % more or 0.9 km/h
      Maximum reverse gear 12.6 km/h and 10 km/h 21 % more or 2.6 km/h

      Carrier

      Rolling bearings number on either side 7 and 6 14 % more or 1
      Contact with ground area 32.7 m2 and 2.1 m2 94 % more or 30.6 m2
      Track shoes number per side 41 and 39 5 % more or 2

      Neutral reasons:

      Standard blade

      Width 2800 mm and 3800 mm
      Height 875 mm and 1500 mm

      Sizes

      Length without blade 2870 mm and 4490 mm
      Length with blade 4090 mm and 5855 mm
      Width between caterpillar tracks 2410 mm and 2940 mm
      Height to cab upper part 2630 mm and 3420 mm
      Caterpillar track length on ground level 2075 mm and 2973 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 7440 kg and 26600 kg

      Motor

      Manufacturer BT and Cummins
      Model Cummins 43.9 Elite and 6C6TAA 8.3
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump system with open center and gear type pump
      Overflow valve pressure 18002.2 kPa and 19000 kPa

      Gear box

      Transmission type single-lever joystick and Powershift, camshaft, full mesh

      Carrier

      Track width 1700 mm and 2070 mm
      Standard shoe size 508 mm and 550 mm

      Images

      Sizes

      1. Length with blade 4090 mm 1. Length with blade 5855 mm
      2. Width between caterpillar tracks 2410 mm 2. Width between caterpillar tracks 2940 mm
      3. Height to cab upper part 2630 mm 3. Height to cab upper part 3420 mm
      4. Caterpillar track length on ground level 2075 mm 4. Caterpillar track length on ground level 2973 mm
      5. Clearance 419 mm 5. Clearance 460 mm
      6. Length without blade 2870 mm 6. Length without blade 4490 mm

      Carrier

      7. Track width 1700 mm 7. Track width 2070 mm
      8. Standard shoe size 508 mm 8. Standard shoe size 550 mm