vs.

      Case 9010B vs. Doosan DX350LC

      8 reasons to buy Case 9010B:

      Swing device

      Rotation speed 13.4 rev / min and 9.6 rev / min 28 % more or 3.8 rev

      Operation

      Hydraulic pump flow rate 121 l/min and 578 l/min 79 % less or 457 l/min

      Motor

      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev
      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev

      Carrier

      Specific ground pressure 33.8 kPa and 49 kPa 31 % less or 15.2 kPa
      Maximum travel speed 5.5 km/h and 5.1 km/h 7 % more or 0.4 km/h

      Booms/sections features 1

      Maximum loading height 7020 mm and 6882 mm 2 % more or 138 mm
      Maximum vertical wall digging depth 5440 mm and 5121 mm 6 % more or 319 mm

      21 reasons to buy Doosan DX350LC:

      Sizes

      Width to outside of caterpillar track 3480 mm and 2590 mm 26 % more or 890 mm
      Clearance 510 mm and 440 mm 14 % more or 70 mm
      Counterweight ground clearance 1195 mm and 890 mm 26 % more or 305 mm

      Operation

      Boom reach drive mechanism fluid volume 6 l. and 2.2 l. 63 % more or 3.8 l.
      Hydraulic system overflow valve pressure 34300 kPa and 217.9 kPa 99 % more or 34082.1 kPa
      Fuel Capacity 550 l. and 240 l. 56 % more or 310 l.
      Cooling system fluid volume 34 l. and 15.7 l. 54 % more or 18.3 l.
      Hydraulic system fluid volume 460 l. and 124 l. 73 % more or 336 l.
      Engine oil volume 36 l. and 10.4 l. 71 % more or 25.6 l.

      Motor

      Displacement 7.6 l. and 3.9 l. 49 % more or 3.7 l.
      Maximum torque 1128 Nm and 393.2 Nm 65 % more or 734.8 Nm
      Cylinders number 6 and 4 33 % more or 2
      Effective power 202.1 kW and 79 kW 61 % more or 123.1 kW

      Carrier

      Track shoes number per side 48 and 44 8 % more or 4
      Rolling bearings number on either side 9 and 6 33 % more or 3

      Booms/sections features 2

      Maximum radius along ground level 10975 mm and 8200 mm 25 % more or 2775 mm
      Maximum loading height 7196 mm and 6700 mm 7 % more or 496 mm
      Maximum vertical wall digging depth 5916 mm and 4980 mm 16 % more or 936 mm
      Maximum excavation depth 7533 mm and 5550 mm 26 % more or 1983 mm

      Booms/sections features 1

      Maximum excavation depth 6931 mm and 6050 mm 13 % more or 881 mm
      Maximum radius along ground level 10382 mm and 8660 mm 17 % more or 1722 mm

      Neutral reasons:

      Sizes

      Caterpillar track length on ground level 2780 mm and 4040 mm
      Rear platform swing radius 2050 mm and 3500 mm
      Height to cab upper part 2770 mm and 3125 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 12700.6 kg and 35200 kg

      Motor

      Manufacturer Case and Doosan
      Model 4TA-390 and DL08
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with intercooler

      Carrier

      Shoe dimensions 599.4 mm and 800 mm
      Support rollers number on either side 2 and 2

      Booms/sections features 2

      Maximum cut height 9090 mm and 10345 mm
      Unit load-transfer height 2770 mm and 3360 mm
      Unit load-transfer length 7600 mm and 11280 mm

      Booms/sections features 1

      Maximum cut height 9410 mm and 9994 mm
      Unit load-transfer height 2770 mm and 3592 mm
      Unit load-transfer length 7630 mm and 11380 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2590 mm 2. Width to outside of caterpillar track 3480 mm
      4. Caterpillar track length on ground level 2780 mm 4. Caterpillar track length on ground level 4040 mm
      5. Clearance 440 mm 5. Clearance 510 mm
      7. Height to cab upper part 2770 mm 7. Height to cab upper part 3125 mm
      8. Rear platform swing radius 2050 mm 8. Rear platform swing radius 3500 mm
      15. Counterweight ground clearance 890 mm 15. Counterweight ground clearance 1195 mm

      Carrier

      14. Shoe dimensions 599.4 mm 14. Shoe dimensions 800 mm

      Booms/sections features 1

      9. Maximum cut height 9410 mm 9. Maximum cut height 10345 mm
      13. Maximum excavation depth 5550 mm 13. Maximum excavation depth 7533 mm
      10. Maximum loading height 7020 mm 10. Maximum loading height 7196 mm
      1. Unit load-transfer length 7630 mm 1. Unit load-transfer length 11300 mm
      11. Maximum radius along ground level 8660 mm 11. Maximum radius along ground level 10975 mm
      3. Unit load-transfer height 2770 mm 3. Unit load-transfer height 3483 mm
      12. Maximum vertical wall digging depth 5440 mm 12. Maximum vertical wall digging depth 5916 mm