- Home/
- Comparison/
- Hydraulic Shovel/
- Case 9010B vs. Sumitomo SH220-2
Case 9010B vs. Sumitomo SH220-2
8 reasons to buy Case 9010B:
Swing device
Rotation speed | 13.4 rev / min and 10.4 rev / min | 22 % more or 3.0 rev |
Operation
Hydraulic pump flow rate | 121 l/min and 424 l/min | 71 % less or 303 l/min |
Generator current strength | 45 amperes and 25 amperes | 44 % more or 20 amperes |
Motor
Power measured at | 2200 rev / min and 2150 rev / min | 2 % more or 50 rev |
Carrier
Specific ground pressure | 33.8 kPa and 50 kPa | 32 % less or 16.2 kPa |
Booms/sections features 2
Maximum loading height | 6700 mm and 6670 mm | 0 % more or 30 mm |
Booms/sections features 1
Maximum loading height | 7020 mm and 6300 mm | 10 % more or 720 mm |
Maximum vertical wall digging depth | 5440 mm and 5350 mm | 2 % more or 90 mm |
21 reasons to buy Sumitomo SH220-2:
Sizes
Width to outside of caterpillar track | 2990 mm and 2590 mm | 13 % more or 400 mm |
Clearance | 460 mm and 440 mm | 4 % more or 20 mm |
Counterweight ground clearance | 1100 mm and 890 mm | 19 % more or 210 mm |
Operation
Hydraulic system overflow valve pressure | 34323.3 kPa and 217.9 kPa | 99 % more or 34105.4 kPa |
Fuel Capacity | 310 l. and 240 l. | 23 % more or 70 l. |
Cooling system fluid volume | 27 l. and 15.7 l. | 42 % more or 11.3 l. |
Hydraulic system fluid volume | 200 l. and 124 l. | 38 % more or 76 l. |
Engine oil volume | 25 l. and 10.4 l. | 58 % more or 14.6 l. |
Boom reach drive mechanism fluid volume | 6 l. and 2.2 l. | 63 % more or 3.8 l. |
Motor
Maximum torque | 539 Nm and 393.2 Nm | 27 % more or 145.8 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 114.1 kW and 79 kW | 31 % more or 35.1 kW |
Displacement | 6.5 l. and 3.9 l. | 40 % more or 2.6 l. |
Torque measured at | 1700 rev / min and 1600 rev / min | 6 % more or 100 rev |
Carrier
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
Track shoes number per side | 47 and 44 | 6 % more or 3 |
Booms/sections features 2
Maximum excavation depth | 6960 mm and 5550 mm | 20 % more or 1410 mm |
Maximum radius along ground level | 10410 mm and 8200 mm | 21 % more or 2210 mm |
Maximum vertical wall digging depth | 6210 mm and 4980 mm | 20 % more or 1230 mm |
Booms/sections features 1
Maximum excavation depth | 6310 mm and 6050 mm | 4 % more or 260 mm |
Maximum radius along ground level | 9780 mm and 8660 mm | 11 % more or 1120 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2770 mm and 2920 mm |
Rear platform swing radius | 2050 mm and 2990 mm |
Caterpillar track length on ground level | 2780 mm and 3460 mm |
Operation
Working weight | 12700.6 kg and 23000 kg |
Operating voltage | 24 V and 24 V |
Motor
Model | 4TA-390 and A-6BG1T |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Manufacturer | Case and Isuzu |
Carrier
Support rollers number on either side | 2 and 2 |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Shoe dimensions | 599.4 mm and 600 mm |
Booms/sections features 2
Unit load-transfer length | 7600 mm and 9960 mm |
Maximum cut height | 9090 mm and 9710 mm |
Unit load-transfer height | 2770 mm and 3050 mm |
Booms/sections features 1
Maximum cut height | 9410 mm and 9310 mm |
Unit load-transfer height | 2770 mm and 3050 mm |
Unit load-transfer length | 7630 mm and 9960 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2590 mm | 2. Width to outside of caterpillar track | 2990 mm |
4. Caterpillar track length on ground level | 2780 mm | 4. Caterpillar track length on ground level | 3460 mm |
5. Clearance | 440 mm | 5. Clearance | 460 mm |
7. Height to cab upper part | 2770 mm | 7. Height to cab upper part | 2920 mm |
8. Rear platform swing radius | 2050 mm | 8. Rear platform swing radius | 2990 mm |
15. Counterweight ground clearance | 890 mm | 15. Counterweight ground clearance | 1100 mm |
Carrier
14. Shoe dimensions | 599.4 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 5440 mm | 12. Maximum vertical wall digging depth | 6670 mm |
13. Maximum excavation depth | 6050 mm | 13. Maximum excavation depth | 6960 mm |
1. Unit load-transfer length | 7600 mm | 1. Unit load-transfer length | 9960 mm |
3. Unit load-transfer height | 2770 mm | 3. Unit load-transfer height | 3050 mm |
9. Maximum cut height | 9090 mm | 9. Maximum cut height | 9940 mm |
10. Maximum loading height | 6700 mm | 10. Maximum loading height | 6890 mm |
11. Maximum radius along ground level | 8200 mm | 11. Maximum radius along ground level | 10830 mm |