- Home/
- Comparison/
- Hydraulic Shovel/
- Case CX160 vs. Case CX210B
Case CX160 vs. Case CX210B
7 reasons to buy Case CX160:
Operation
Hydraulic pump flow rate | 138 l/min and 211 l/min | 35 % less or 73 l/min |
Motor
Power measured at | 2200 rev / min and 1800 rev / min | 18 % more or 400 rev |
Carrier
Maximum travel speed | 6 km/h and 5.6 km/h | 7 % more or 0.4 km/h |
Hook traction force | 128 kN and 189.2 kN | 32 % less or 61.2 kN |
Booms/sections features 2
Maximum loading height | 6680 mm and 6590 mm | 1 % more or 90 mm |
Maximum vertical wall digging depth | 5200 mm and 550 mm | 89 % more or 4650 mm |
Booms/sections features 1
Maximum loading height | 6960 mm and 6810 mm | 2 % more or 150 mm |
20 reasons to buy Case CX210B:
Swing device
Rotation speed | 11.5 rev / min and 11.4 rev / min | 1 % more or 0.1 rev |
Sizes
Counterweight ground clearance | 1040 mm and 1020 mm | 2 % more or 20 mm |
Width to outside of caterpillar track | 3200 mm and 2600 mm | 19 % more or 600 mm |
Clearance | 460 mm and 432 mm | 6 % more or 28 mm |
Operation
Engine oil volume | 23.1 l. and 9.5 l. | 59 % more or 13.6 l. |
Generator current strength | 50 amperes and 45 amperes | 10 % more or 5 amperes |
Fuel Capacity | 410 l. and 249.8 l. | 39 % more or 160.2 l. |
Cooling system fluid volume | 25.6 l. and 17.7 l. | 31 % more or 7.9 l. |
Hydraulic system fluid volume | 240 l. and 148 l. | 38 % more or 92 l. |
Motor
Effective power | 117 kW and 79 kW | 32 % more or 38 kW |
Displacement | 5.2 l. and 3.9 l. | 25 % more or 1.3 l. |
Torque measured at | 1500 rev / min and 1450 rev / min | 3 % more or 50 rev |
Maximum torque | 627.7 Nm and 440.6 Nm | 30 % more or 187.1 Nm |
Carrier
Track shoes number per side | 49 and 42 | 14 % more or 7 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Specific ground pressure | 35.9 kPa and 41.4 kPa | 13 % less or 5.5 kPa |
Booms/sections features 2
Maximum radius along ground level | 9240 mm and 8970 mm | 3 % more or 270 mm |
Booms/sections features 1
Maximum excavation depth | 6650 mm and 6450 mm | 3 % more or 200 mm |
Maximum vertical wall digging depth | 5960 mm and 5690 mm | 5 % more or 270 mm |
Maximum radius along ground level | 9730 mm and 9320 mm | 4 % more or 410 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2400 mm and 2750 mm |
Caterpillar track length on ground level | 3090 mm and 3660 mm |
Height to cab upper part | 2950 mm and 2940 mm |
Operation
Boom reach drive mechanism fluid volume | 5 l. and 5 l. |
Operating voltage | 24 V and 24 V |
Working weight | 16431.8 kg and 21500 kg |
Motor
Manufacturer | Case and Isuzu |
Model | 4TA-390 and 4HK1X, III Level III certified |
Cylinders number | 4 and 4 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Carrier
Shoe dimensions | 600 mm and 800 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 2
Unit load-transfer height | 2950 mm and 3190 mm |
Unit load-transfer length | 8410 mm and 9480 mm |
Maximum excavation depth | 6110 mm and 6110 mm |
Maximum cut height | 9300 mm and 9380 mm |
Booms/sections features 1
Maximum cut height | 9600 mm and 9650 mm |
Unit load-transfer length | 8430 mm and 9400 mm |
Unit load-transfer height | 3090 mm and 2970 mm |
Images
Sizes
5. Clearance | 432 mm | 5. Clearance | 460 mm |
7. Height to cab upper part | 2950 mm | 7. Height to cab upper part | 2940 mm |
8. Rear platform swing radius | 2400 mm | 8. Rear platform swing radius | 2750 mm |
15. Counterweight ground clearance | 1020 mm | 15. Counterweight ground clearance | 1040 mm |
2. Width to outside of caterpillar track | 2600 mm | 2. Width to outside of caterpillar track | 3200 mm |
4. Caterpillar track length on ground level | 3090 mm | 4. Caterpillar track length on ground level | 3660 mm |
Carrier
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
13. Maximum excavation depth | 6110 mm | 13. Maximum excavation depth | 6110 mm |
1. Unit load-transfer length | 8430 mm | 1. Unit load-transfer length | 9480 mm |
3. Unit load-transfer height | 3090 mm | 3. Unit load-transfer height | 3190 mm |
9. Maximum cut height | 9600 mm | 9. Maximum cut height | 9380 mm |
10. Maximum loading height | 6960 mm | 10. Maximum loading height | 6590 mm |
11. Maximum radius along ground level | 9320 mm | 11. Maximum radius along ground level | 9240 mm |
12. Maximum vertical wall digging depth | 5690 mm | 12. Maximum vertical wall digging depth | 550 mm |