- Home/
- Comparison/
- Hydraulic Shovel/
- Case CX160 vs. Hyundai R320LC-7A
Case CX160 vs. Hyundai R320LC-7A
8 reasons to buy Case CX160:
Swing device
Rotation speed | 11.4 rev / min and 9.1 rev / min | 20 % more or 2.3 rev |
Operation
Hydraulic system overflow valve pressure | 238400 kPa and 35301.1 kPa | 85 % more or 203098.9 kPa |
Hydraulic pump flow rate | 138 l/min and 520 l/min | 73 % less or 382 l/min |
Motor
Power measured at | 2200 rev / min and 1750 rev / min | 20 % more or 450 rev |
Carrier
Specific ground pressure | 41.4 kPa and 60.8 kPa | 32 % less or 19.4 kPa |
Maximum travel speed | 6 km/h and 5.3 km/h | 12 % more or 0.7 km/h |
Hook traction force | 128 kN and 279.5 kN | 54 % less or 151.5 kN |
Booms/sections features 1
Maximum excavation depth | 6450 mm and 6370 mm | 1 % more or 80 mm |
24 reasons to buy Hyundai R320LC-7A:
Sizes
Width to outside of caterpillar track | 3280 mm and 2600 mm | 21 % more or 680 mm |
Clearance | 500 mm and 432 mm | 14 % more or 68 mm |
Counterweight ground clearance | 1200 mm and 1020 mm | 15 % more or 180 mm |
Operation
Fuel Capacity | 480 l. and 249.8 l. | 48 % more or 230.2 l. |
Cooling system fluid volume | 45 l. and 17.7 l. | 61 % more or 27.3 l. |
Hydraulic system fluid volume | 320 l. and 148 l. | 54 % more or 172 l. |
Engine oil volume | 35 l. and 9.5 l. | 73 % more or 25.5 l. |
Boom reach drive mechanism fluid volume | 11 l. and 5 l. | 55 % more or 6 l. |
Generator current strength | 50 amperes and 45 amperes | 10 % more or 5 amperes |
Motor
Maximum torque | 1125.3 Nm and 440.6 Nm | 61 % more or 684.7 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Full power | 192.4 kW and 82 kW | 57 % more or 110.4 kW |
Effective power | 176.7 kW and 79 kW | 55 % more or 97.7 kW |
Displacement | 8.3 l. and 3.9 l. | 53 % more or 4.4 l. |
Torque measured at | 1500 rev / min and 1450 rev / min | 3 % more or 50 rev |
Carrier
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Track shoes number per side | 48 and 42 | 12 % more or 6 |
Booms/sections features 2
Maximum excavation depth | 6670 mm and 6110 mm | 8 % more or 560 mm |
Maximum loading height | 7050 mm and 6680 mm | 5 % more or 370 mm |
Maximum radius along ground level | 10330 mm and 8970 mm | 13 % more or 1360 mm |
Maximum vertical wall digging depth | 5920 mm and 5200 mm | 12 % more or 720 mm |
Booms/sections features 1
Maximum radius along ground level | 10110 mm and 9320 mm | 8 % more or 790 mm |
Maximum loading height | 7050 mm and 6960 mm | 1 % more or 90 mm |
Maximum vertical wall digging depth | 5980 mm and 5690 mm | 5 % more or 290 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2950 mm and 3090 mm |
Rear platform swing radius | 2400 mm and 3330 mm |
Caterpillar track length on ground level | 3090 mm and 4030 mm |
Operation
Working weight | 16431.8 kg and 32200 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Manufacturer | Case and Cummins |
Model | 4TA-390 and QSC |
Carrier
Support rollers number on either side | 2 and 2 |
Shoe dimensions | 600 mm and 600 mm |
Booms/sections features 2
Maximum cut height | 9300 mm and 10170 mm |
Unit load-transfer height | 2950 mm and 3670 mm |
Unit load-transfer length | 8410 mm and 11100 mm |
Booms/sections features 1
Unit load-transfer length | 8430 mm and 11230 mm |
Maximum cut height | 9600 mm and 10220 mm |
Unit load-transfer height | 3090 mm and 3610 mm |
Images
Sizes
5. Clearance | 432 mm | 5. Clearance | 500 mm |
7. Height to cab upper part | 2950 mm | 7. Height to cab upper part | 3090 mm |
8. Rear platform swing radius | 2400 mm | 8. Rear platform swing radius | 3330 mm |
15. Counterweight ground clearance | 1020 mm | 15. Counterweight ground clearance | 1200 mm |
2. Width to outside of caterpillar track | 2600 mm | 2. Width to outside of caterpillar track | 3280 mm |
4. Caterpillar track length on ground level | 3090 mm | 4. Caterpillar track length on ground level | 4030 mm |
Carrier
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 6110 mm | 13. Maximum excavation depth | 6670 mm |
1. Unit load-transfer length | 8410 mm | 1. Unit load-transfer length | 10980 mm |
3. Unit load-transfer height | 2950 mm | 3. Unit load-transfer height | 3380 mm |
9. Maximum cut height | 9300 mm | 9. Maximum cut height | 10310 mm |
10. Maximum loading height | 6680 mm | 10. Maximum loading height | 7240 mm |
11. Maximum radius along ground level | 8970 mm | 11. Maximum radius along ground level | 10940 mm |
12. Maximum vertical wall digging depth | 5200 mm | 12. Maximum vertical wall digging depth | 6360 mm |