- Home/
- Comparison/
- Hydraulic Shovel/
- Case CX160 vs. Terex TXC225LC-1
Case CX160 vs. Terex TXC225LC-1
7 reasons to buy Case CX160:
Operation
Hydraulic pump flow rate | 138 l/min and 430 l/min | 68 % less or 292 l/min |
Hydraulic system overflow valve pressure | 238400 kPa and 32336.4 kPa | 86 % more or 206063.6 kPa |
Motor
Power measured at | 2200 rev / min and 1950 rev / min | 11 % more or 250 rev |
Torque measured at | 1450 rev / min and 1400 rev / min | 3 % more or 50 rev |
Carrier
Specific ground pressure | 41.4 kPa and 44.1 kPa | 6 % less or 2.7 kPa |
Maximum travel speed | 6 km/h and 5.5 km/h | 8 % more or 0.5 km/h |
Booms/sections features 1
Maximum loading height | 6960 mm and 6810 mm | 2 % more or 150 mm |
21 reasons to buy Terex TXC225LC-1:
Swing device
Rotation speed | 12.3 rev / min and 11.4 rev / min | 7 % more or 0.9 rev |
Sizes
Width to outside of caterpillar track | 2990 mm and 2600 mm | 13 % more or 390 mm |
Clearance | 480 mm and 432 mm | 10 % more or 48 mm |
Counterweight ground clearance | 1105 mm and 1020 mm | 8 % more or 85 mm |
Operation
Fuel Capacity | 350 l. and 249.8 l. | 29 % more or 100.2 l. |
Cooling system fluid volume | 42 l. and 17.7 l. | 58 % more or 24.3 l. |
Hydraulic system fluid volume | 220 l. and 148 l. | 33 % more or 72 l. |
Engine oil volume | 19 l. and 9.5 l. | 50 % more or 9.5 l. |
Motor
Effective power | 110.4 kW and 79 kW | 28 % more or 31.4 kW |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 5.8 l. and 3.9 l. | 33 % more or 1.9 l. |
Maximum torque | 603.3 Nm and 440.6 Nm | 27 % more or 162.7 Nm |
Carrier
Track shoes number per side | 49 and 42 | 14 % more or 7 |
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Booms/sections features 2
Maximum loading height | 6885 mm and 6680 mm | 3 % more or 205 mm |
Maximum vertical wall digging depth | 6035 mm and 5200 mm | 14 % more or 835 mm |
Maximum excavation depth | 6125 mm and 6110 mm | 0 % more or 15 mm |
Maximum radius along ground level | 9400 mm and 8970 mm | 5 % more or 430 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 6045 mm and 5690 mm | 6 % more or 355 mm |
Maximum excavation depth | 6630 mm and 6450 mm | 3 % more or 180 mm |
Maximum radius along ground level | 9735 mm and 9320 mm | 4 % more or 415 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2950 mm and 3000 mm |
Rear platform swing radius | 2400 mm and 2750 mm |
Caterpillar track length on ground level | 3090 mm and 3645 mm |
Operation
Working weight | 16431.8 kg and 21500.3 kg |
Boom reach drive mechanism fluid volume | 5 l. and 5 l. |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging, with subsequent cooling of charging air by oncoming air flow |
Manufacturer | Case and Daewoo |
Model | 4TA-390 and DE58TIS |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 2
Maximum cut height | 9300 mm and 9825 mm |
Booms/sections features 1
Maximum cut height | 9600 mm and 9660 mm |
Unit load-transfer height | 3090 mm and 3030 mm |
Unit load-transfer length | 8430 mm and 9510 mm |
Images
Sizes
7. Height to cab upper part | 2950 mm | 7. Height to cab upper part | 3000 mm |
2. Width to outside of caterpillar track | 2600 mm | 2. Width to outside of caterpillar track | 2990 mm |
8. Rear platform swing radius | 2400 mm | 8. Rear platform swing radius | 2750 mm |
4. Caterpillar track length on ground level | 3090 mm | 4. Caterpillar track length on ground level | 3645 mm |
15. Counterweight ground clearance | 1020 mm | 15. Counterweight ground clearance | 1105 mm |
5. Clearance | 432 mm | 5. Clearance | 480 mm |
Carrier
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 6110 mm | 13. Maximum excavation depth | 6125 mm |
1. Unit load-transfer length | 8430 mm | 1. Unit load-transfer length | 9510 mm |
3. Unit load-transfer height | 3090 mm | 3. Unit load-transfer height | 3030 mm |
9. Maximum cut height | 9600 mm | 9. Maximum cut height | 9870 mm |
10. Maximum loading height | 6960 mm | 10. Maximum loading height | 7020 mm |
11. Maximum radius along ground level | 9320 mm | 11. Maximum radius along ground level | 10230 mm |
12. Maximum vertical wall digging depth | 5690 mm | 12. Maximum vertical wall digging depth | 6560 mm |