- Home/
- Comparison/
- Hydraulic Shovel/
- Case CX180 vs. Hitachi ZX180LC-3
Case CX180 vs. Hitachi ZX180LC-3
10 reasons to buy Case CX180:
Sizes
Clearance | 460 mm and 450 mm | 2 % more or 10 mm |
Counterweight ground clearance | 1040 mm and 1030 mm | 1 % more or 10 mm |
Operation
Hydraulic pump flow rate | 281 l/min and 382 l/min | 26 % less or 101 l/min |
Motor
Displacement | 4.3 l. and 3 l. | 30 % more or 1.3 l. |
Carrier
Specific ground pressure | 40 kPa and 41 kPa | 2 % less or 1 kPa |
Booms/sections features 2
Maximum radius along ground level | 9310 mm and 9270 mm | 0 % more or 40 mm |
Maximum loading height | 6960 mm and 6570 mm | 6 % more or 390 mm |
Maximum vertical wall digging depth | 5660 mm and 5550 mm | 2 % more or 110 mm |
Booms/sections features 1
Maximum radius along ground level | 8960 mm and 8910 mm | 1 % more or 50 mm |
Maximum loading height | 6680 mm and 6450 mm | 3 % more or 230 mm |
11 reasons to buy Hitachi ZX180LC-3:
Swing device
Rotation speed | 14.1 rev / min and 11.4 rev / min | 19 % more or 2.7 rev |
Operation
Boom reach drive mechanism fluid volume | 6.2 l. and 5 l. | 19 % more or 1.2 l. |
Fuel Capacity | 320 l. and 250 l. | 22 % more or 70 l. |
Cooling system fluid volume | 18 l. and 17.7 l. | 2 % more or 0.3 l. |
Hydraulic system fluid volume | 220 l. and 148 l. | 33 % more or 72 l. |
Engine oil volume | 17 l. and 15 l. | 12 % more or 2 l. |
Motor
Effective power | 90.2 kW and 79 kW | 12 % more or 11.2 kW |
Carrier
Maximum travel speed | 5.3 km/h and 4 km/h | 25 % more or 1.3 km/h |
Booms/sections features 2
Maximum excavation depth | 6570 mm and 6430 mm | 2 % more or 140 mm |
Booms/sections features 1
Maximum excavation depth | 6120 mm and 6100 mm | 0 % more or 20 mm |
Maximum vertical wall digging depth | 5210 mm and 5180 mm | 1 % more or 30 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2370 mm and 2490 mm |
Caterpillar track length on ground level | 3370 mm and 3370 mm |
Width to outside of caterpillar track | 2800 mm and 2800 mm |
Height to cab upper part | 2890 mm and 2950 mm |
Operation
Hydraulic system overflow valve pressure | 34300 kPa and 34300 kPa |
Working weight | 17500 kg and 18300 kg |
Motor
Aspiration | turbocharging and Turbocharging with intercooler |
Cylinders number | 4 and 4 |
Manufacturer | Isuzu and Isuzu |
Model | DD-4BG1TRA and AI-4JJ1X |
Power measured at | 2200 rev / min and 2200 rev / min |
Carrier
Rolling bearings number on either side | 7 and 7 |
Track width | 2200 mm and 2200 mm |
Track shoes number per side | 46 and 46 |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 2
Maximum cut height | 9610 mm and 9400 mm |
Unit load-transfer height | 3090 mm and 3080 mm |
Unit load-transfer length | 8440 mm and 8970 mm |
Booms/sections features 1
Maximum cut height | 9310 mm and 9290 mm |
Unit load-transfer height | 2920 mm and 3100 mm |
Unit load-transfer length | 8400 mm and 9000 mm |
Images
Sizes
15. Counterweight ground clearance | 1040 mm | 15. Counterweight ground clearance | 1030 mm |
2. Width to outside of caterpillar track | 2800 mm | 2. Width to outside of caterpillar track | 2800 mm |
4. Caterpillar track length on ground level | 3370 mm | 4. Caterpillar track length on ground level | 3370 mm |
5. Clearance | 460 mm | 5. Clearance | 450 mm |
7. Height to cab upper part | 2890 mm | 7. Height to cab upper part | 2950 mm |
8. Rear platform swing radius | 2370 mm | 8. Rear platform swing radius | 2490 mm |
Carrier
6. Track width | 2200 mm | 6. Track width | 2200 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
10. Maximum loading height | 6680 mm | 10. Maximum loading height | 6940 mm |
11. Maximum radius along ground level | 8960 mm | 11. Maximum radius along ground level | 9790 mm |
12. Maximum vertical wall digging depth | 5180 mm | 12. Maximum vertical wall digging depth | 5550 mm |
13. Maximum excavation depth | 6100 mm | 13. Maximum excavation depth | 6570 mm |
1. Unit load-transfer length | 8440 mm | 1. Unit load-transfer length | 8970 mm |
3. Unit load-transfer height | 3090 mm | 3. Unit load-transfer height | 3390 mm |
9. Maximum cut height | 9610 mm | 9. Maximum cut height | 9790 mm |