vs.

      Case CX225 vs. Link-Belt 210X2 Long Front Part

      1 reasons to buy Case CX225:

      Operation

      Hydraulic pump flow rate 190 l/min and 421.7 l/min 55 % less or 231.7 l/min

      12 reasons to buy Link-Belt 210X2 Long Front Part:

      Swing device

      Rotation speed 11.5 rev / min and 10.6 rev / min 8 % more or 0.9 rev

      Sizes

      Counterweight ground clearance 1040 mm and 1020 mm 2 % more or 20 mm

      Operation

      Hydraulic system fluid volume 240 l. and 205 l. 15 % more or 35 l.
      Fuel Capacity 410 l. and 265 l. 35 % more or 145 l.

      Motor

      Effective power 117.1 kW and 114.4 kW 2 % more or 2.7 kW
      Maximum torque 627.7 Nm and 615.5 Nm 2 % more or 12.2 Nm

      Carrier

      Specific ground pressure 36 kPa and 37.9 kPa 5 % less or 1.9 kPa
      Maximum travel speed 5.6 km/h and 5 km/h 11 % more or 0.6 km/h

      Booms/sections features 1

      Maximum loading height 10730 mm and 8020 mm 25 % more or 2710 mm
      Maximum vertical wall digging depth 10290 mm and 6060 mm 41 % more or 4230 mm
      Maximum radius along ground level 15490 mm and 9730 mm 37 % more or 5760 mm
      Maximum excavation depth 12010 mm and 6700 mm 44 % more or 5310 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2970 mm and 2940 mm
      Clearance 460 mm and 460 mm
      Rear platform swing radius 1720 mm and 2720 mm
      Caterpillar track length on ground level 3660 mm and 3660 mm
      Width to outside of caterpillar track 3190 mm and 3190 mm

      Operation

      Cooling system fluid volume 25.6 l. and 25.6 l.
      Engine oil volume 23.1 l. and 23.1 l.
      Boom reach drive mechanism fluid volume 5 l. and 5 l.
      Operating voltage 24 V and 24 V
      Generator current strength 50 amperes and 50 amperes
      Working weight 24141 kg and 23001.7 kg

      Motor

      Power measured at 1800 rev / min and 1800 rev / min
      Displacement 5.2 l. and 5.2 l.
      Torque measured at 1500 rev / min and 1500 rev / min
      Cylinders number 4 and 4
      Manufacturer Isuzu and Isuzu
      Aspiration turbocharging and turbocharging
      Model AI-4HK1X, III Level III certified and AH-4HK1X

      Carrier

      Track width 2390 mm and 2390 mm
      Track shoes number per side 49 and 49
      Shoe dimensions 800 mm and 800 mm
      Support rollers number on either side 2 and 2
      Rolling bearings number on either side 8 and 8

      Booms/sections features 1

      Maximum cut height 10910 mm and 12970 mm
      Unit load-transfer height 2970 mm and 3000 mm
      Unit load-transfer length 8850 mm and 12470 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3190 mm 2. Width to outside of caterpillar track 3190 mm
      4. Caterpillar track length on ground level 3660 mm 4. Caterpillar track length on ground level 3660 mm
      5. Clearance 460 mm 5. Clearance 460 mm
      7. Height to cab upper part 2970 mm 7. Height to cab upper part 2940 mm
      8. Rear platform swing radius 1720 mm 8. Rear platform swing radius 2720 mm
      15. Counterweight ground clearance 1020 mm 15. Counterweight ground clearance 1040 mm

      Carrier

      14. Shoe dimensions 800 mm 14. Shoe dimensions 800 mm
      6. Track width 2390 mm 6. Track width 2390 mm

      Booms/sections features 1

      1. Unit load-transfer length 8930 mm 1. Unit load-transfer length 12470 mm
      3. Unit load-transfer height 3140 mm 3. Unit load-transfer height 3000 mm
      9. Maximum cut height 10520 mm 9. Maximum cut height 12970 mm
      10. Maximum loading height 7630 mm 10. Maximum loading height 10730 mm
      11. Maximum radius along ground level 9180 mm 11. Maximum radius along ground level 15490 mm
      12. Maximum vertical wall digging depth 5480 mm 12. Maximum vertical wall digging depth 10290 mm
      13. Maximum excavation depth 6.1 mm 13. Maximum excavation depth 12010 mm