vs.

      Doosan DX180LC vs. Case CX130

      18 reasons to buy Doosan DX180LC:

      Sizes

      Clearance 455 mm and 432 mm 5 % more or 23 mm
      Counterweight ground clearance 1035 mm and 890 mm 14 % more or 145 mm

      Operation

      Hydraulic system fluid volume 186 l. and 123 l. 34 % more or 63 l.
      Engine oil volume 25 l. and 9.5 l. 62 % more or 15.5 l.
      Boom reach drive mechanism fluid volume 3.8 l. and 2.2 l. 42 % more or 1.6 l.
      Generator current strength 50 amperes and 45 amperes 10 % more or 5 amperes
      Fuel Capacity 280 l. and 250 l. 11 % more or 30 l.
      Cooling system fluid volume 20 l. and 17.7 l. 11 % more or 2.3 l.

      Motor

      Full power 91 kW and 82 kW 10 % more or 9 kW
      Effective power 88 kW and 79 kW 10 % more or 9 kW
      Displacement 5.9 l. and 3.9 l. 34 % more or 2.0 l.
      Maximum torque 451 Nm and 440.6 Nm 2 % more or 10.4 Nm
      Cylinders number 6 and 4 33 % more or 2

      Carrier

      Track shoes number per side 44 and 43 2 % more or 1
      Support rollers number on either side 2 and 1 50 % more or 1

      Booms/sections features 2

      Maximum radius along ground level 8980 mm and 8130 mm 9 % more or 850 mm
      Maximum vertical wall digging depth 5030 mm and 4960 mm 1 % more or 70 mm
      Maximum excavation depth 6120 mm and 5540 mm 9 % more or 580 mm

      13 reasons to buy Case CX130:

      Swing device

      Rotation speed 13.8 rev / min and 10.7 rev / min 22 % more or 3.1 rev

      Sizes

      Width to outside of caterpillar track 2590 mm and 2490 mm 4 % more or 100 mm

      Operation

      Hydraulic system overflow valve pressure 34301.4 kPa and 32400 kPa 6 % more or 1901.4 kPa
      Hydraulic pump flow rate 254 l/min and 304 l/min 16 % less or 50 l/min

      Motor

      Power measured at 2200 rev / min and 1950 rev / min 11 % more or 250 rev
      Torque measured at 1450 rev / min and 1400 rev / min 3 % more or 50 rev

      Carrier

      Specific ground pressure 33.1 kPa and 41.2 kPa 20 % less or 8.1 kPa
      Maximum travel speed 5.6 km/h and 5 km/h 11 % more or 0.6 km/h

      Booms/sections features 2

      Maximum loading height 6770 mm and 6490 mm 4 % more or 280 mm

      Booms/sections features 1

      Maximum excavation depth 6100 mm and 5720 mm 6 % more or 380 mm
      Maximum radius along ground level 8610 mm and 8590 mm 0 % more or 20 mm
      Maximum loading height 7060 mm and 6260 mm 11 % more or 800 mm
      Maximum vertical wall digging depth 5340 mm and 4660 mm 13 % more or 680 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2925 mm and 2740 mm
      Rear platform swing radius 2450 mm and 2110 mm
      Caterpillar track length on ground level 3180 mm and 2790 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 17659.7 kg and 12273 kg

      Motor

      Manufacturer Doosan and Case
      Model DL06 and 4TA-390, 2 level
      Aspiration Turbocharged engine with intermediate cooling of charging air by oncoming air flow and turbocharging and cooling at the outlet

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Rolling bearings number on either side 7 and 7

      Booms/sections features 2

      Maximum cut height 9180 mm and 9160 mm
      Unit load-transfer height 2875 mm and 2740 mm
      Unit load-transfer length 8700 mm and 7570 mm

      Booms/sections features 1

      Unit load-transfer height 3005 mm and 2770 mm
      Unit load-transfer length 8740 mm and 7620 mm
      Maximum cut height 8950 mm and 9450 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2490 mm 2. Width to outside of caterpillar track 2590 mm
      4. Caterpillar track length on ground level 3180 mm 4. Caterpillar track length on ground level 2790 mm
      5. Clearance 455 mm 5. Clearance 432 mm
      7. Height to cab upper part 2925 mm 7. Height to cab upper part 2740 mm
      8. Rear platform swing radius 2450 mm 8. Rear platform swing radius 2110 mm
      15. Counterweight ground clearance 1035 mm 15. Counterweight ground clearance 890 mm

      Carrier

      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      12. Maximum vertical wall digging depth 5030 mm 12. Maximum vertical wall digging depth 4960 mm
      1. Unit load-transfer length 8750 mm 1. Unit load-transfer length 7570 mm
      13. Maximum excavation depth 6120 mm 13. Maximum excavation depth 5540 mm
      3. Unit load-transfer height 3165 mm 3. Unit load-transfer height 2740 mm
      9. Maximum cut height 9110 mm 9. Maximum cut height 9160 mm
      10. Maximum loading height 6490 mm 10. Maximum loading height 6770 mm
      11. Maximum radius along ground level 9340 mm 11. Maximum radius along ground level 8130 mm