- Home/
- Comparison/
- Hydraulic Shovel/
- Fiat-Hitachi EX355EL vs. Terex TXC480LC-2
Fiat-Hitachi EX355EL vs. Terex TXC480LC-2
8 reasons to buy Fiat-Hitachi EX355EL:
Swing device
Rotation speed | 11.3 rev / min and 8.8 rev / min | 22 % more or 2.5 rev |
Operation
Hydraulic system overflow valve pressure | 32000 kPa and 31371.1 kPa | 2 % more or 628.9 kPa |
Hydraulic pump flow rate | 520 l/min and 710 l/min | 27 % less or 190 l/min |
Hydraulic system fluid volume | 320 l. and 265 l. | 17 % more or 55 l. |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Maximum travel speed | 5.5 km/h and 5 km/h | 9 % more or 0.5 km/h |
Specific ground pressure | 66.9 kPa and 79.3 kPa | 16 % less or 12.4 kPa |
Booms/sections features 1
Maximum vertical wall digging depth | 6290 mm and 4080 mm | 35 % more or 2210 mm |
15 reasons to buy Terex TXC480LC-2:
Sizes
Clearance | 770 mm and 530 mm | 31 % more or 240 mm |
Counterweight ground clearance | 1460 mm and 1250 mm | 14 % more or 210 mm |
Width to outside of caterpillar track | 3900 mm and 3000 mm | 23 % more or 900 mm |
Shovel
Bucket initial volume | 2.1 m3 and 1.3 m3 | 38 % more or 0.8 m3 |
Maximum bucket volume | 2.9 m3 and 2.1 m3 | 28 % more or 0.8 m3 |
Operation
Generator current strength | 300 amperes and 40 amperes | 87 % more or 260 amperes |
Fuel Capacity | 620 l. and 560 l. | 10 % more or 60 l. |
Cooling system fluid volume | 40 l. and 39 l. | 2 % more or 1 l. |
Engine oil volume | 44 l. and 35 l. | 20 % more or 9 l. |
Motor
Displacement | 11 l. and 9.8 l. | 11 % more or 1.2 l. |
Effective power | 244.6 kW and 177 kW | 28 % more or 67.6 kW |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 1
Maximum loading height | 7730 mm and 7030 mm | 9 % more or 700 mm |
Maximum excavation depth | 7360 mm and 6490 mm | 12 % more or 870 mm |
Maximum radius along ground level | 11460 mm and 10100 mm | 12 % more or 1360 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 3300 mm and 3700 mm |
Caterpillar track length on ground level | 4052 mm and 4470 mm |
Height to cab upper part | 3020 mm and 3350 mm |
Operation
Working weight | 34000 kg and 47491.1 kg |
Operating voltage | 24 V and 24 V |
Motor
Cylinders number | 6 and 6 |
Aspiration | turbocharging and turbocharging, with subsequent cooling of charging air by oncoming air flow |
Manufacturer | Isuzu and Doosan |
Model | 6SD1T and DV11 |
Carrier
Track width | 2400 mm and 3300 mm |
Shoe dimensions | 600 mm and 600 mm |
Rolling bearings number on either side | 9 and 9 |
Booms/sections features 1
Maximum cut height | 9920 mm and 10940 mm |
Images
Sizes
7. Height to cab upper part | 3020 mm | 7. Height to cab upper part | 3350 mm |
8. Rear platform swing radius | 3300 mm | 8. Rear platform swing radius | 3700 mm |
15. Counterweight ground clearance | 1250 mm | 15. Counterweight ground clearance | 1460 mm |
2. Width to outside of caterpillar track | 3000 mm | 2. Width to outside of caterpillar track | 3900 mm |
4. Caterpillar track length on ground level | 4052 mm | 4. Caterpillar track length on ground level | 4470 mm |
5. Clearance | 530 mm | 5. Clearance | 770 mm |
Carrier
6. Track width | 2400 mm | 6. Track width | 3300 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
9. Maximum cut height | 9920 mm | 9. Maximum cut height | 11230 mm |
10. Maximum loading height | 7030 mm | 10. Maximum loading height | 8040 mm |
11. Maximum radius along ground level | 10100 mm | 11. Maximum radius along ground level | 12430 mm |
12. Maximum vertical wall digging depth | 6290 mm | 12. Maximum vertical wall digging depth | 4965 mm |
13. Maximum excavation depth | 6490 mm | 13. Maximum excavation depth | 8440 mm |
1. Unit load-transfer length | 11040 mm | 1. Unit load-transfer length | 12130 mm |
3. Unit load-transfer height | 3490 mm | 3. Unit load-transfer height | 3730 mm |