Halla HE360LCH vs. Case CX225

18 reasons to buy Halla HE360LCH:

Sizes

Width to outside of caterpillar track	3340 mm and 3190 mm	4 % more or 150 mm
Clearance	565 mm and 460 mm	19 % more or 105 mm
Counterweight ground clearance	1238 mm and 1020 mm	18 % more or 218 mm

Operation

Boom reach drive mechanism fluid volume	7 l. and 5 l.	29 % more or 2 l.
Generator current strength	70 amperes and 50 amperes	29 % more or 20 amperes
Fuel Capacity	530 l. and 265 l.	50 % more or 265 l.
Cooling system fluid volume	47 l. and 25.6 l.	46 % more or 21.4 l.
Hydraulic system fluid volume	415 l. and 205 l.	51 % more or 210 l.
Engine oil volume	30 l. and 23.1 l.	23 % more or 6.9 l.

Motor

Displacement	10 l. and 5.2 l.	48 % more or 4.8 l.
Maximum torque	1176.9 Nm and 615.5 Nm	48 % more or 561.4 Nm
Cylinders number	6 and 4	33 % more or 2

Carrier

Track shoes number per side	51 and 49	4 % more or 2
Rolling bearings number on either side	9 and 8	11 % more or 1

Booms/sections features 2

Maximum excavation depth	6590 mm and 6.1 mm	100 % more or 6583.9 mm
Maximum radius along ground level	10020 mm and 9180 mm	8 % more or 840 mm

Booms/sections features 1

Maximum excavation depth	7600 mm and 6700 mm	12 % more or 900 mm
Maximum radius along ground level	11300 mm and 9730 mm	14 % more or 1570 mm

8 reasons to buy Case CX225:

Swing device

Rotation speed

10.6 rev / min and 10 rev / min

6 % more or 0.6 rev

Operation

Hydraulic pump flow rate

190 l/min and 590 l/min

68 % less or 400 l/min

Motor

Torque measured at

1500 rev / min and 1300 rev / min

13 % more or 200 rev

Carrier

Specific ground pressure	37.9 kPa and 66.9 kPa	43 % less or 29.0 kPa
Maximum travel speed	5 km/h and 4.8 km/h	4 % more or 0.2 km/h
Hook traction force	187 kN and 292.6 kN	36 % less or 105.6 kN

Booms/sections features 2

Maximum loading height

7630 mm and 6710 mm

12 % more or 920 mm

Booms/sections features 1

Maximum loading height

8020 mm and 7370 mm

8 % more or 650 mm

Neutral reasons:

Sizes

Height to cab upper part	2458 mm and 2970 mm
Rear platform swing radius	3254 mm and 1720 mm
Caterpillar track length on ground level	4340 mm and 3660 mm

Operation

Operating voltage	24 V and 24 V
Working weight	35499.5 kg and 24141 kg

Motor

Power measured at	1800 rev / min and 1800 rev / min
Manufacturer	Cummins and Isuzu
Model	LTA 10-C and AI-4HK1X, III Level III certified
Aspiration	turbocharging and turbocharging

Carrier

Shoe dimensions	600 mm and 800 mm
Support rollers number on either side	2 and 2
Track width	2740 mm and 2390 mm

Booms/sections features 2

Unit load-transfer height	3415 mm and 3140 mm
Unit load-transfer length	10104 mm and 8930 mm
Maximum cut height	9660 mm and 10520 mm

Booms/sections features 1

Unit load-transfer height	3458 mm and 2970 mm
Unit load-transfer length	11060 mm and 8850 mm
Maximum cut height	10420 mm and 10910 mm

Images

Sizes

2. Width to outside of caterpillar track	3340 mm	2. Width to outside of caterpillar track	3190 mm
4. Caterpillar track length on ground level	4340 mm	4. Caterpillar track length on ground level	3660 mm
5. Clearance	565 mm	5. Clearance	460 mm
7. Height to cab upper part	2458 mm	7. Height to cab upper part	2970 mm
8. Rear platform swing radius	3254 mm	8. Rear platform swing radius	1720 mm
15. Counterweight ground clearance	1238 mm	15. Counterweight ground clearance	1020 mm

Carrier

6. Track width	2740 mm	6. Track width	2390 mm
14. Shoe dimensions	600 mm	14. Shoe dimensions	800 mm

Booms/sections features 1

13. Maximum excavation depth	6590 mm	13. Maximum excavation depth	6.1 mm
1. Unit load-transfer length	11060 mm	1. Unit load-transfer length	8930 mm
3. Unit load-transfer height	3458 mm	3. Unit load-transfer height	3140 mm
9. Maximum cut height	10420 mm	9. Maximum cut height	10520 mm
10. Maximum loading height	7370 mm	10. Maximum loading height	7630 mm
11. Maximum radius along ground level	11300 mm	11. Maximum radius along ground level	9180 mm