- Home/
- Comparison/
- Hydraulic Shovel/
- Hitachi EX220LC-5 vs. Komatsu PC600-7
Hitachi EX220LC-5 vs. Komatsu PC600-7
10 reasons to buy Hitachi EX220LC-5:
Swing device
Rotation speed | 13.5 rev / min and 8.3 rev / min | 39 % more or 5.2 rev |
Operation
Boom reach drive mechanism fluid volume | 13.2 l. and 13 l. | 2 % more or 0.2 l. |
Hydraulic system overflow valve pressure | 34335.9 kPa and 34323.2 kPa | 0 % more or 12.7 kPa |
Hydraulic pump flow rate | 408 l/min and 820 l/min | 50 % less or 412 l/min |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Maximum travel speed | 5.5 km/h and 4.9 km/h | 11 % more or 0.6 km/h |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Specific ground pressure | 35.3 kPa and 100 kPa | 65 % less or 64.7 kPa |
Track shoes number per side | 51 and 49 | 4 % more or 2 |
Booms/sections features 2
Maximum vertical wall digging depth | 6020 mm and 5630 mm | 6 % more or 390 mm |
19 reasons to buy Komatsu PC600-7:
Sizes
Clearance | 780 mm and 460 mm | 41 % more or 320 mm |
Counterweight ground clearance | 1365 mm and 1090 mm | 20 % more or 275 mm |
Width to outside of caterpillar track | 3900 mm and 3390 mm | 13 % more or 510 mm |
Shovel
Bucket initial volume | 2.7 m3 and 1 m3 | 63 % more or 1.7 m3 |
Maximum bucket volume | 3.5 m3 and 1.4 m3 | 60 % more or 2.1 m3 |
Operation
Fuel Capacity | 880 l. and 380 l. | 57 % more or 500 l. |
Cooling system fluid volume | 57 l. and 23 l. | 60 % more or 34 l. |
Hydraulic system fluid volume | 360 l. and 239 l. | 34 % more or 121 l. |
Engine oil volume | 37 l. and 26 l. | 30 % more or 11 l. |
Motor
Effective power | 287 kW and 116.3 kW | 59 % more or 170.7 kW |
Displacement | 15.2 l. and 6.7 l. | 56 % more or 8.5 l. |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 2
Maximum loading height | 7210 mm and 6760 mm | 6 % more or 450 mm |
Maximum excavation depth | 7060 mm and 6950 mm | 2 % more or 110 mm |
Maximum radius along ground level | 11300 mm and 10100 mm | 11 % more or 1200 mm |
Booms/sections features 1
Maximum excavation depth | 8490 mm and 6300 mm | 26 % more or 2190 mm |
Maximum radius along ground level | 12800 mm and 9530 mm | 26 % more or 3270 mm |
Maximum loading height | 7960 mm and 6540 mm | 18 % more or 1420 mm |
Maximum vertical wall digging depth | 7510 mm and 5400 mm | 28 % more or 2110 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2940 mm and 3800 mm |
Caterpillar track length on ground level | 3840 mm and 4600 mm |
Height to cab upper part | 2940 mm and 3290 mm |
Operation
Working weight | 23813.6 kg and 56600 kg |
Motor
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Cylinders number | 6 and 6 |
Manufacturer | Hino and Komatsu |
Model | H07C-TD and SA6D140E-3 |
Carrier
Track width | 2590 mm and 2590 mm |
Shoe dimensions | 800 mm and 600 mm |
Booms/sections features 2
Maximum cut height | 9630 mm and 11140 mm |
Unit load-transfer height | 3100 mm and 4600 mm |
Unit load-transfer length | 10140 mm and 11830 mm |
Booms/sections features 1
Unit load-transfer length | 10260 mm and 12810 mm |
Maximum cut height | 9410 mm and 11880 mm |
Unit load-transfer height | 3290 mm and 4300 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3390 mm | 2. Width to outside of caterpillar track | 3900 mm |
4. Caterpillar track length on ground level | 3840 mm | 4. Caterpillar track length on ground level | 4600 mm |
5. Clearance | 460 mm | 5. Clearance | 780 mm |
7. Height to cab upper part | 2940 mm | 7. Height to cab upper part | 3290 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 3800 mm |
15. Counterweight ground clearance | 1090 mm | 15. Counterweight ground clearance | 1365 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 2590 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
9. Maximum cut height | 9990 mm | 9. Maximum cut height | 11140 mm |
1. Unit load-transfer length | 10200 mm | 1. Unit load-transfer length | 12810 mm |
10. Maximum loading height | 7100 mm | 10. Maximum loading height | 7210 mm |
3. Unit load-transfer height | 3320 mm | 3. Unit load-transfer height | 4300 mm |
11. Maximum radius along ground level | 10730 mm | 11. Maximum radius along ground level | 11300 mm |
12. Maximum vertical wall digging depth | 6740 mm | 12. Maximum vertical wall digging depth | 5630 mm |
13. Maximum excavation depth | 7590 mm | 13. Maximum excavation depth | 7060 mm |