- Home/
- Comparison/
- Hydraulic Shovel/
- Hitachi EX280H-5 vs. Kato HD800VII
Hitachi EX280H-5 vs. Kato HD800VII
9 reasons to buy Hitachi EX280H-5:
Swing device
Rotation speed | 10.6 rev / min and 10.5 rev / min | 1 % more or 0.1 rev |
Sizes
Width to outside of caterpillar track | 3190 mm and 2990 mm | 6 % more or 200 mm |
Clearance | 500 mm and 480 mm | 4 % more or 20 mm |
Counterweight ground clearance | 1160 mm and 1085 mm | 6 % more or 75 mm |
Operation
Fuel Capacity | 380 l. and 320 l. | 16 % more or 60 l. |
Booms/sections features 1
Maximum excavation depth | 7230 mm and 6230 mm | 14 % more or 1000 mm |
Maximum radius along ground level | 10710 mm and 9520 mm | 11 % more or 1190 mm |
Maximum loading height | 7070 mm and 6520 mm | 8 % more or 550 mm |
Maximum vertical wall digging depth | 6110 mm and 5740 mm | 6 % more or 370 mm |
3 reasons to buy Kato HD800VII:
Motor
Power measured at | 2100 rev / min and 2050 rev / min | 2 % more or 50 rev |
Carrier
Maximum travel speed | 5.5 km/h and 4.4 km/h | 20 % more or 1.1 km/h |
Specific ground pressure | 44.6 kPa and 56 kPa | 20 % less or 11.4 kPa |
Neutral reasons:
Sizes
Rear platform swing radius | 2940 mm and 3040 mm |
Caterpillar track length on ground level | 3730 mm and 3340 mm |
Operation
Working weight | 27600 kg and 19800 kg |
Motor
Manufacturer | Hino and Mitsubishi |
Model | H07C-TD and 6D14-T |
Booms/sections features 1
Maximum cut height | 9980 mm and 9610 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 2990 mm |
4. Caterpillar track length on ground level | 3730 mm | 4. Caterpillar track length on ground level | 3340 mm |
5. Clearance | 500 mm | 5. Clearance | 480 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 3040 mm |
15. Counterweight ground clearance | 1160 mm | 15. Counterweight ground clearance | 1085 mm |
Booms/sections features 1
13. Maximum excavation depth | 7230 mm | 13. Maximum excavation depth | 7710 mm |
1. Unit load-transfer length | 10290 mm | 1. Unit load-transfer length | 9780 mm |
3. Unit load-transfer height | 3170 mm | 3. Unit load-transfer height | 2940 mm |
9. Maximum cut height | 9980 mm | 9. Maximum cut height | 9610 mm |
10. Maximum loading height | 7070 mm | 10. Maximum loading height | 6520 mm |
11. Maximum radius along ground level | 10710 mm | 11. Maximum radius along ground level | 9520 mm |
12. Maximum vertical wall digging depth | 6110 mm | 12. Maximum vertical wall digging depth | 5740 mm |