- Home/
- Comparison/
- Hydraulic Shovel/
- Hyundai R160LC-7 vs. Hitachi ZX450HLC
Hyundai R160LC-7 vs. Hitachi ZX450HLC
6 reasons to buy Hyundai R160LC-7:
Swing device
Rotation speed | 12.1 rev / min and 9 rev / min | 26 % more or 3.1 rev |
Operation
Hydraulic pump flow rate | 336 l/min and 360 l/min | 7 % less or 24 l/min |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
Maximum travel speed | 5.6 km/h and 5.5 km/h | 2 % more or 0.1 km/h |
Booms/sections features 2
Maximum vertical wall digging depth | 5030 mm and 4950 mm | 2 % more or 80 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 4670 mm and 4260 mm | 9 % more or 410 mm |
21 reasons to buy Hitachi ZX450HLC:
Sizes
Width to outside of caterpillar track | 3490 mm and 2590 mm | 26 % more or 900 mm |
Clearance | 738 mm and 460 mm | 38 % more or 278 mm |
Counterweight ground clearance | 1350 mm and 1035 mm | 23 % more or 315 mm |
Operation
Fuel Capacity | 650 l. and 260 l. | 60 % more or 390 l. |
Cooling system fluid volume | 61 l. and 30 l. | 51 % more or 31 l. |
Hydraulic system fluid volume | 510 l. and 240 l. | 53 % more or 270 l. |
Engine oil volume | 55 l. and 16.5 l. | 70 % more or 38.5 l. |
Boom reach drive mechanism fluid volume | 6.5 l. and 5 l. | 23 % more or 1.5 l. |
Hydraulic system overflow valve pressure | 34335.9 kPa and 224.6 kPa | 99 % more or 34111.3 kPa |
Motor
Maximum torque | 1275 Nm and 416.2 Nm | 67 % more or 858.8 Nm |
Effective power | 234.1 kW and 86.5 kW | 63 % more or 147.6 kW |
Displacement | 15.7 l. and 5 l. | 68 % more or 10.7 l. |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Track shoes number per side | 53 and 49 | 8 % more or 4 |
Booms/sections features 2
Maximum excavation depth | 6230 mm and 5830 mm | 6 % more or 400 mm |
Maximum radius along ground level | 10600 mm and 8960 mm | 15 % more or 1640 mm |
Maximum loading height | 7340 mm and 6900 mm | 6 % more or 440 mm |
Booms/sections features 1
Maximum excavation depth | 5800 mm and 5460 mm | 6 % more or 340 mm |
Maximum radius along ground level | 10210 mm and 8600 mm | 16 % more or 1610 mm |
Maximum loading height | 7310 mm and 6680 mm | 9 % more or 630 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2915 mm and 3370 mm |
Rear platform swing radius | 2530 mm and 3500 mm |
Caterpillar track length on ground level | 3190 mm and 4470 mm |
Operation
Working weight | 17400 kg and 45800 kg |
Operating voltage | 24 V and 12 V |
Motor
Aspiration | turbocharging and turbocharging |
Torque measured at | 1500 rev / min and 1500 rev / min |
Cylinders number | 6 and 6 |
Manufacturer | Mitsubishi and Isuzu |
Model | S6S-DT and AA-6WG1TQA |
Carrier
Track width | 1990 mm and 2890 mm |
Shoe dimensions | 600 mm and 600 mm |
Booms/sections features 2
Unit load-transfer length | 8570 mm and 11820 mm |
Unit load-transfer height | 3050 mm and 3370 mm |
Maximum cut height | 9600 mm and 10890 mm |
Booms/sections features 1
Unit load-transfer height | 3040 mm and 3370 mm |
Unit load-transfer length | 8580 mm and 11820 mm |
Maximum cut height | 9390 mm and 10650 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2590 mm | 2. Width to outside of caterpillar track | 3490 mm |
4. Caterpillar track length on ground level | 3190 mm | 4. Caterpillar track length on ground level | 4470 mm |
5. Clearance | 460 mm | 5. Clearance | 738 mm |
7. Height to cab upper part | 2915 mm | 7. Height to cab upper part | 3370 mm |
8. Rear platform swing radius | 2530 mm | 8. Rear platform swing radius | 3500 mm |
15. Counterweight ground clearance | 1035 mm | 15. Counterweight ground clearance | 1350 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 2890 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
10. Maximum loading height | 6680 mm | 10. Maximum loading height | 7310 mm |
11. Maximum radius along ground level | 8600 mm | 11. Maximum radius along ground level | 10210 mm |
12. Maximum vertical wall digging depth | 4670 mm | 12. Maximum vertical wall digging depth | 4260 mm |
13. Maximum excavation depth | 5830 mm | 13. Maximum excavation depth | 5800 mm |
1. Unit load-transfer length | 8580 mm | 1. Unit load-transfer length | 11820 mm |
3. Unit load-transfer height | 3040 mm | 3. Unit load-transfer height | 3370 mm |
9. Maximum cut height | 9390 mm | 9. Maximum cut height | 10890 mm |