- Home/
- Comparison/
- Hydraulic Shovel/
- Hyundai R250LC-9 vs. Komatsu PC600SE-6
Hyundai R250LC-9 vs. Komatsu PC600SE-6
6 reasons to buy Hyundai R250LC-9:
Swing device
Rotation speed | 12 rev / min and 8.3 rev / min | 31 % more or 3.7 rev |
Operation
Hydraulic pump flow rate | 444 l/min and 820 l/min | 46 % less or 376 l/min |
Motor
Power measured at | 1900 rev / min and 1800 rev / min | 5 % more or 100 rev |
Carrier
Track shoes number per side | 51 and 49 | 4 % more or 2 |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Specific ground pressure | 50 kPa and 101 kPa | 50 % less or 51 kPa |
19 reasons to buy Komatsu PC600SE-6:
Sizes
Counterweight ground clearance | 1365 mm and 1115 mm | 18 % more or 250 mm |
Width to outside of caterpillar track | 3900 mm and 3180 mm | 18 % more or 720 mm |
Clearance | 780 mm and 480 mm | 38 % more or 300 mm |
Shovel
Bucket initial volume | 2.7 m3 and 1.1 m3 | 59 % more or 1.6 m3 |
Operation
Generator current strength | 70 amperes and 50 amperes | 29 % more or 20 amperes |
Hydraulic system overflow valve pressure | 34323.2 kPa and 34322.1 kPa | 0 % more or 1.1 kPa |
Fuel Capacity | 880 l. and 400 l. | 55 % more or 480 l. |
Cooling system fluid volume | 57 l. and 35 l. | 39 % more or 22 l. |
Hydraulic system fluid volume | 370 l. and 285 l. | 23 % more or 85 l. |
Engine oil volume | 42 l. and 24 l. | 43 % more or 18 l. |
Boom reach drive mechanism fluid volume | 13.1 l. and 6 l. | 54 % more or 7.1 l. |
Motor
Effective power | 287 kW and 136.5 kW | 52 % more or 150.5 kW |
Displacement | 15.2 l. and 6.7 l. | 56 % more or 8.5 l. |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Maximum travel speed | 5.4 km/h and 5.3 km/h | 2 % more or 0.1 km/h |
Booms/sections features 1
Maximum excavation depth | 7060 mm and 6050 mm | 14 % more or 1010 mm |
Maximum radius along ground level | 11300 mm and 9360 mm | 17 % more or 1940 mm |
Maximum loading height | 7200 mm and 6360 mm | 12 % more or 840 mm |
Maximum vertical wall digging depth | 5630 mm and 5480 mm | 3 % more or 150 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2975 mm and 3675 mm |
Caterpillar track length on ground level | 3830 mm and 4250 mm |
Height to cab upper part | 2990 mm and 3310 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 25200 kg and 57480 kg |
Motor
Manufacturer | Cummins and Komatsu |
Model | QSB6.7 and SA6D140E-3 |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Track width | 2580 mm and 3300 mm |
Booms/sections features 1
Unit load-transfer length | 10050 mm and 11830 mm |
Unit load-transfer height | 3530 mm and 4600 mm |
Maximum cut height | 9450 mm and 11140 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3180 mm | 2. Width to outside of caterpillar track | 3900 mm |
4. Caterpillar track length on ground level | 3830 mm | 4. Caterpillar track length on ground level | 4250 mm |
5. Clearance | 480 mm | 5. Clearance | 780 mm |
7. Height to cab upper part | 2990 mm | 7. Height to cab upper part | 3310 mm |
8. Rear platform swing radius | 2975 mm | 8. Rear platform swing radius | 3675 mm |
15. Counterweight ground clearance | 1115 mm | 15. Counterweight ground clearance | 1365 mm |
Carrier
6. Track width | 2580 mm | 6. Track width | 3300 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 6050 mm | 13. Maximum excavation depth | 7060 mm |
12. Maximum vertical wall digging depth | 5480 mm | 12. Maximum vertical wall digging depth | 5630 mm |
1. Unit load-transfer length | 10000 mm | 1. Unit load-transfer length | 11830 mm |
3. Unit load-transfer height | 3590 mm | 3. Unit load-transfer height | 4600 mm |
9. Maximum cut height | 9460 mm | 9. Maximum cut height | 11140 mm |
10. Maximum loading height | 6420 mm | 10. Maximum loading height | 7200 mm |
11. Maximum radius along ground level | 9680 mm | 11. Maximum radius along ground level | 11300 mm |