- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 110 vs. Terex TXC140LC-1
John Deere 110 vs. Terex TXC140LC-1
8 reasons to buy John Deere 110:
Swing device
Rotation speed | 13.5 rev / min and 12 rev / min | 11 % more or 1.5 rev |
Sizes
Clearance | 440 mm and 410 mm | 7 % more or 30 mm |
Operation
Hydraulic system overflow valve pressure | 34335.9 kPa and 32336.4 kPa | 6 % more or 1999.5 kPa |
Hydraulic pump flow rate | 98.4 l/min and 232 l/min | 58 % less or 133.6 l/min |
Fuel Capacity | 249.8 l. and 230 l. | 8 % more or 19.8 l. |
Motor
Power measured at | 2200 rev / min and 1850 rev / min | 16 % more or 350 rev |
Carrier
Specific ground pressure | 34.3 kPa and 35.2 kPa | 3 % less or 0.9 kPa |
Maximum travel speed | 5.5 km/h and 4.9 km/h | 11 % more or 0.6 km/h |
20 reasons to buy Terex TXC140LC-1:
Sizes
Counterweight ground clearance | 920 mm and 890 mm | 3 % more or 30 mm |
Width to outside of caterpillar track | 2600 mm and 2590 mm | 0 % more or 10 mm |
Operation
Hydraulic system fluid volume | 165 l. and 132.5 l. | 20 % more or 32.5 l. |
Engine oil volume | 19 l. and 13 l. | 32 % more or 6 l. |
Boom reach drive mechanism fluid volume | 3 l. and 2.8 l. | 7 % more or 0.2 l. |
Motor
Displacement | 5.8 l. and 4.5 l. | 22 % more or 1.3 l. |
Torque measured at | 1850 rev / min and 1300 rev / min | 30 % more or 550 rev |
Maximum torque | 391.8 Nm and 330.8 Nm | 16 % more or 61.0 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 70.8 kW and 59.7 kW | 16 % more or 11.1 kW |
Carrier
Track shoes number per side | 46 and 41 | 11 % more or 5 |
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
Booms/sections features 2
Maximum excavation depth | 6120 mm and 5510.8 mm | 10 % more or 609.2 mm |
Maximum radius along ground level | 8600 mm and 7873 mm | 8 % more or 727 mm |
Maximum loading height | 6530 mm and 6096 mm | 7 % more or 434 mm |
Maximum vertical wall digging depth | 5660 mm and 5004.8 mm | 12 % more or 655.2 mm |
Booms/sections features 1
Maximum radius along ground level | 8100 mm and 7467.6 mm | 8 % more or 632.4 mm |
Maximum loading height | 6200 mm and 5815.6 mm | 6 % more or 384.4 mm |
Maximum vertical wall digging depth | 5070 mm and 4495.8 mm | 11 % more or 574.2 mm |
Maximum excavation depth | 5630 mm and 4953 mm | 12 % more or 677 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2720 mm and 2830 mm |
Rear platform swing radius | 2100 mm and 2200 mm |
Caterpillar track length on ground level | 2620 mm and 3035 mm |
Operation
Cooling system fluid volume | 22 l. and 22 l. |
Operating voltage | 24 V and 24 V |
Working weight | 12292.4 kg and 13879.9 kg |
Motor
Aspiration | turbocharging and Turbocharged engine with the charge air intercooling by the liquid of the engine cooling system |
Manufacturer | John Deere and Daewoo |
Model | 4045 T and DE58TIS |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 1 and 1 |
Track width | 1990 mm and 2000 mm |
Booms/sections features 2
Maximum cut height | 8229.6 mm and 8950 mm |
Booms/sections features 1
Maximum cut height | 7976.6 mm and 8620 mm |
Unit load-transfer height | 2720 mm and 2830 mm |
Unit load-transfer length | 7568.2 mm and 7700 mm |
Images
Sizes
7. Height to cab upper part | 2720 mm | 7. Height to cab upper part | 2830 mm |
8. Rear platform swing radius | 2100 mm | 8. Rear platform swing radius | 2200 mm |
15. Counterweight ground clearance | 890 mm | 15. Counterweight ground clearance | 920 mm |
2. Width to outside of caterpillar track | 2590 mm | 2. Width to outside of caterpillar track | 2600 mm |
4. Caterpillar track length on ground level | 2620 mm | 4. Caterpillar track length on ground level | 3035 mm |
5. Clearance | 440 mm | 5. Clearance | 410 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 2000 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 5510.8 mm | 13. Maximum excavation depth | 6120 mm |
1. Unit load-transfer length | 7568.2 mm | 1. Unit load-transfer length | 7700 mm |
3. Unit load-transfer height | 2720 mm | 3. Unit load-transfer height | 2830 mm |
9. Maximum cut height | 7976.6 mm | 9. Maximum cut height | 8950 mm |
10. Maximum loading height | 5815.6 mm | 10. Maximum loading height | 6530 mm |
11. Maximum radius along ground level | 7467.6 mm | 11. Maximum radius along ground level | 8600 mm |
12. Maximum vertical wall digging depth | 4495.8 mm | 12. Maximum vertical wall digging depth | 5660 mm |