vs.

      John Deere 240D LC vs. Sumitomo SH120-2

      26 reasons to buy John Deere 240D LC:

      Swing device

      Rotation speed 13.5 rev / min and 13.4 rev / min 1 % more or 0.1 rev

      Sizes

      Clearance 460 mm and 440 mm 4 % more or 20 mm
      Counterweight ground clearance 1090 mm and 890 mm 18 % more or 200 mm
      Width to outside of caterpillar track 3390 mm and 2490 mm 27 % more or 900 mm

      Operation

      Fuel Capacity 500 l. and 240 l. 52 % more or 260 l.
      Cooling system fluid volume 29.9 l. and 19 l. 36 % more or 10.9 l.
      Hydraulic system fluid volume 240 l. and 120 l. 50 % more or 120 l.
      Engine oil volume 24.6 l. and 15.5 l. 37 % more or 9.1 l.
      Boom reach drive mechanism fluid volume 7 l. and 2 l. 71 % more or 5 l.
      Generator current strength 80 amperes and 25 amperes 69 % more or 55 amperes

      Motor

      Displacement 6.8 l. and 4.3 l. 37 % more or 2.5 l.
      Maximum torque 781 Nm and 294 Nm 62 % more or 487 Nm
      Cylinders number 6 and 4 33 % more or 2
      Effective power 132 kW and 65 kW 51 % more or 67 kW

      Carrier

      Track shoes number per side 51 and 44 14 % more or 7
      Support rollers number on either side 2 and 1 50 % more or 1
      Rolling bearings number on either side 9 and 6 33 % more or 3
      Specific ground pressure 36.8 kPa and 40.2 kPa 8 % less or 3.4 kPa

      Booms/sections features 2

      Maximum excavation depth 7490 mm and 5550 mm 26 % more or 1940 mm
      Maximum radius along ground level 10640 mm and 8340 mm 22 % more or 2300 mm
      Maximum loading height 7540 mm and 6700 mm 11 % more or 840 mm
      Maximum vertical wall digging depth 6630 mm and 4980 mm 25 % more or 1650 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 5910 mm and 4580 mm 23 % more or 1330 mm
      Maximum loading height 7160 mm and 6430 mm 10 % more or 730 mm
      Maximum excavation depth 6840 mm and 5150 mm 25 % more or 1690 mm
      Maximum radius along ground level 9990 mm and 7970 mm 20 % more or 2020 mm

      3 reasons to buy Sumitomo SH120-2:

      Operation

      Hydraulic pump flow rate 242 l/min and 448 l/min 46 % less or 206 l/min

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Neutral reasons:

      Sizes

      Height to cab upper part 3020 mm and 2695 mm
      Rear platform swing radius 2940 mm and 2050 mm
      Caterpillar track length on ground level 3840 mm and 2780 mm

      Operation

      Working weight 24790.6 kg and 12480 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer John Deere and Isuzu
      Model 6068H and A-4BG1T

      Carrier

      Shoe dimensions 800 mm and 500 mm
      Maximum travel speed 5.5 km/h and 5.5 km/h

      Booms/sections features 2

      Unit load-transfer height 3140 mm and 2695 mm
      Unit load-transfer length 10210 mm and 7600 mm
      Maximum cut height 10520 mm and 9090 mm

      Booms/sections features 1

      Unit load-transfer height 3070 mm and 2695 mm
      Unit load-transfer length 10150 mm and 7600 mm
      Maximum cut height 10120 mm and 8820 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3390 mm 2. Width to outside of caterpillar track 2490 mm
      4. Caterpillar track length on ground level 3840 mm 4. Caterpillar track length on ground level 2780 mm
      5. Clearance 460 mm 5. Clearance 440 mm
      7. Height to cab upper part 3020 mm 7. Height to cab upper part 2695 mm
      8. Rear platform swing radius 2940 mm 8. Rear platform swing radius 2050 mm
      15. Counterweight ground clearance 1090 mm 15. Counterweight ground clearance 890 mm

      Carrier

      14. Shoe dimensions 800 mm 14. Shoe dimensions 500 mm

      Booms/sections features 1

      3. Unit load-transfer height 3070 mm 3. Unit load-transfer height 2695 mm
      11. Maximum radius along ground level 9990 mm 11. Maximum radius along ground level 8340 mm
      9. Maximum cut height 10120 mm 9. Maximum cut height 9410 mm
      12. Maximum vertical wall digging depth 5910 mm 12. Maximum vertical wall digging depth 4980 mm
      10. Maximum loading height 7160 mm 10. Maximum loading height 7020 mm
      13. Maximum excavation depth 6840 mm 13. Maximum excavation depth 5550 mm
      1. Unit load-transfer length 10210 mm 1. Unit load-transfer length 7600 mm