- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 2554 Road Machine vs. John Deere 330 LC
John Deere 2554 Road Machine vs. John Deere 330 LC
8 reasons to buy John Deere 2554 Road Machine:
Swing device
Rotation speed | 12.6 rev / min and 10.9 rev / min | 13 % more or 1.7 rev |
Sizes
Width to outside of caterpillar track | 3430 mm and 3390 mm | 1 % more or 40 mm |
Clearance | 610 mm and 509 mm | 17 % more or 101 mm |
Counterweight ground clearance | 1321 mm and 1160 mm | 12 % more or 161 mm |
Operation
Hydraulic system overflow valve pressure | 34335.9 kPa and 31881.3 kPa | 7 % more or 2454.6 kPa |
Fuel Capacity | 1018 l. and 560.2 l. | 45 % more or 457.8 l. |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Carrier
Hook traction force | 197.6 kN and 249.5 kN | 21 % less or 51.9 kN |
14 reasons to buy John Deere 330 LC:
Swing device
Swing torque | 91788.9 Nm and 70013 Nm | 24 % more or 21775.9 Nm |
Operation
Boom reach drive mechanism fluid volume | 17 l. and 4.7 l. | 72 % more or 12.3 l. |
Hydraulic pump flow rate | 291.5 l/min and 438 l/min | 33 % less or 146.5 l/min |
Cooling system fluid volume | 55 l. and 23.5 l. | 57 % more or 31.5 l. |
Hydraulic system fluid volume | 321.8 l. and 130 l. | 60 % more or 191.8 l. |
Engine oil volume | 28 l. and 19 l. | 32 % more or 9 l. |
Motor
Effective power | 175.2 kW and 132 kW | 25 % more or 43.2 kW |
Displacement | 8.1 l. and 6.8 l. | 16 % more or 1.3 l. |
Maximum torque | 1274.5 Nm and 723 Nm | 43 % more or 551.5 Nm |
Carrier
Specific ground pressure | 46.5 kPa and 49 kPa | 5 % less or 2.5 kPa |
Booms/sections features 2
Maximum radius along ground level | 10844.8 mm and 10710 mm | 1 % more or 134.8 mm |
Maximum excavation depth | 7290.8 mm and 7030 mm | 4 % more or 260.8 mm |
Booms/sections features 1
Maximum excavation depth | 6770 mm and 6700 mm | 1 % more or 70 mm |
Maximum radius along ground level | 10300 mm and 10260 mm | 0 % more or 40 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3630 mm and 3140 mm |
Rear platform swing radius | 3250 mm and 3300 mm |
Operation
Operating voltage | 24 V and 24 V |
Generator current strength | 45 amperes and 45 amperes |
Working weight | 29257 kg and 33021.5 kg |
Motor
Model | 6068H and 6081H |
Cylinders number | 6 and 6 |
Manufacturer | John Deere and John Deere |
Carrier
Shoe dimensions | 710 mm and 800 mm |
Support rollers number on either side | 2 and 2 |
Rolling bearings number on either side | 9 and 9 |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Track width | 2720 mm and 2590 mm |
Booms/sections features 2
Maximum cut height | 10510 mm and 10186.4 mm |
Unit load-transfer height | 3660 mm and 3240 mm |
Unit load-transfer length | 10490 mm and 10950 mm |
Booms/sections features 1
Unit load-transfer height | 3660 mm and 3460 mm |
Unit load-transfer length | 10360 mm and 11070 mm |
Maximum cut height | 9880 mm and 9830 mm |
Images
Sizes
7. Height to cab upper part | 3630 mm | 7. Height to cab upper part | 3140 mm |
8. Rear platform swing radius | 3250 mm | 8. Rear platform swing radius | 3300 mm |
15. Counterweight ground clearance | 1321 mm | 15. Counterweight ground clearance | 1160 mm |
2. Width to outside of caterpillar track | 3430 mm | 2. Width to outside of caterpillar track | 3390 mm |
5. Clearance | 610 mm | 5. Clearance | 509 mm |
Carrier
6. Track width | 2720 mm | 6. Track width | 2590 mm |
14. Shoe dimensions | 710 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
3. Unit load-transfer height | 3660 mm | 3. Unit load-transfer height | 3460 mm |
9. Maximum cut height | 10510 mm | 9. Maximum cut height | 9830 mm |
11. Maximum radius along ground level | 10710 mm | 11. Maximum radius along ground level | 10300 mm |
13. Maximum excavation depth | 7030 mm | 13. Maximum excavation depth | 6770 mm |
1. Unit load-transfer length | 10490 mm | 1. Unit load-transfer length | 10950 mm |