- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 450 LC vs. Link-Belt 460LX
John Deere 450 LC vs. Link-Belt 460LX
18 reasons to buy John Deere 450 LC:
Sizes
Counterweight ground clearance | 1350 mm and 1330 mm | 1 % more or 20 mm |
Clearance | 735 mm and 540 mm | 27 % more or 195 mm |
Shovel
Bucket initial volume | 1.9 m3 and 1.6 m3 | 16 % more or 0.3 m3 |
Operation
Hydraulic system fluid volume | 518.6 l. and 450 l. | 13 % more or 68.6 l. |
Engine oil volume | 34 l. and 33 l. | 3 % more or 1 l. |
Hydraulic pump flow rate | 359.6 l/min and 720 l/min | 50 % less or 360.4 l/min |
Motor
Power measured at | 2000 rev / min and 1950 rev / min | 2 % more or 50 rev |
Displacement | 10.1 l. and 9.8 l. | 3 % more or 0.3 l. |
Maximum torque | 1294.8 Nm and 1274.5 Nm | 2 % more or 20.3 Nm |
Carrier
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Track shoes number per side | 53 and 50 | 6 % more or 3 |
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 4
Maximum loading height | 8763 mm and 8420 mm | 4 % more or 343 mm |
Maximum vertical wall digging depth | 8458.2 mm and 8220 mm | 3 % more or 238.2 mm |
Booms/sections features 2
Maximum excavation depth | 7772.4 mm and 7720 mm | 1 % more or 52.4 mm |
Maximum radius along ground level | 11811 mm and 11770 mm | 0 % more or 41 mm |
Booms/sections features 1
Maximum excavation depth | 7290.8 mm and 6870 mm | 6 % more or 420.8 mm |
Maximum radius along ground level | 11201.4 mm and 10990 mm | 2 % more or 211.4 mm |
20 reasons to buy Link-Belt 460LX:
Swing device
Swing torque | 150102.6 Nm and 145077.9 Nm | 3 % more or 5024.7 Nm |
Sizes
Width to outside of caterpillar track | 3650 mm and 3640 mm | 0 % more or 10 mm |
Operation
Cooling system fluid volume | 45.5 l. and 38 l. | 16 % more or 7.5 l. |
Boom reach drive mechanism fluid volume | 10.5 l. and 5.7 l. | 46 % more or 4.8 l. |
Generator current strength | 50 amperes and 45 amperes | 10 % more or 5 amperes |
Hydraulic system overflow valve pressure | 34266.9 kPa and 29440.6 kPa | 14 % more or 4826.3 kPa |
Fuel Capacity | 610 l. and 605.7 l. | 1 % more or 4.3 l. |
Motor
Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Effective power | 235.6 kW and 212.5 kW | 10 % more or 23.1 kW |
Carrier
Specific ground pressure | 53 kPa and 59.9 kPa | 12 % less or 6.9 kPa |
Booms/sections features 4
Maximum excavation depth | 9200 mm and 9119.6 mm | 1 % more or 80.4 mm |
Maximum radius along ground level | 13200 mm and 13182.6 mm | 0 % more or 17.4 mm |
Booms/sections features 3
Maximum excavation depth | 8340 mm and 8254 mm | 1 % more or 86 mm |
Maximum radius along ground level | 12330 mm and 12268.2 mm | 1 % more or 61.8 mm |
Maximum loading height | 7940 mm and 7772.4 mm | 2 % more or 167.6 mm |
Maximum vertical wall digging depth | 7160 mm and 7034.8 mm | 2 % more or 125.2 mm |
Booms/sections features 2
Maximum loading height | 7740 mm and 7671.8 mm | 1 % more or 68.2 mm |
Maximum vertical wall digging depth | 6570 mm and 6425.2 mm | 2 % more or 144.8 mm |
Booms/sections features 1
Maximum loading height | 7420 mm and 7010.4 mm | 6 % more or 409.6 mm |
Maximum vertical wall digging depth | 5670 mm and 4776.2 mm | 16 % more or 893.8 mm |
Neutral reasons:
Swing device
Rotation speed | 9 rev / min and 9 rev / min |
Sizes
Rear platform swing radius | 3470 mm and 3620 mm |
Caterpillar track length on ground level | 4470 mm and 4400 mm |
Height to cab upper part | 3280 mm and 3340 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 44306.9 kg and 45903.6 kg |
Motor
Aspiration | turbocharging and Turbocharging with intercooler |
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Isuzu |
Model | 6101 A and AA-6SD1XQB |
Carrier
Rolling bearings number on either side | 9 and 9 |
Track width | 2890 mm and 2750 mm |
Shoe dimensions | 750 mm and 900 mm |
Booms/sections features 4
Maximum cut height | 11862.8 mm and 11860 mm |
Unit load-transfer height | 4660 mm and 4390 mm |
Unit load-transfer length | 11700 mm and 12000 mm |
Booms/sections features 3
Unit load-transfer height | 3480 mm and 3600 mm |
Unit load-transfer length | 11790 mm and 11920 mm |
Maximum cut height | 11177 mm and 11340 mm |
Booms/sections features 2
Maximum cut height | 11073.4 mm and 11140 mm |
Unit load-transfer height | 3480 mm and 3600 mm |
Unit load-transfer length | 11790 mm and 11940 mm |
Booms/sections features 1
Unit load-transfer height | 3600 mm and 3640 mm |
Unit load-transfer length | 11880 mm and 11990 mm |
Maximum cut height | 10262.6 mm and 10820 mm |
Images
Sizes
4. Caterpillar track length on ground level | 4470 mm | 4. Caterpillar track length on ground level | 4400 mm |
5. Clearance | 735 mm | 5. Clearance | 540 mm |
7. Height to cab upper part | 3280 mm | 7. Height to cab upper part | 3340 mm |
8. Rear platform swing radius | 3470 mm | 8. Rear platform swing radius | 3620 mm |
15. Counterweight ground clearance | 1350 mm | 15. Counterweight ground clearance | 1330 mm |
2. Width to outside of caterpillar track | 3640 mm | 2. Width to outside of caterpillar track | 3650 mm |
Carrier
6. Track width | 2890 mm | 6. Track width | 2750 mm |
14. Shoe dimensions | 750 mm | 14. Shoe dimensions | 900 mm |
Booms/sections features 1
1. Unit load-transfer length | 11700 mm | 1. Unit load-transfer length | 11940 mm |
3. Unit load-transfer height | 4660 mm | 3. Unit load-transfer height | 3600 mm |
9. Maximum cut height | 11862.8 mm | 9. Maximum cut height | 11140 mm |
10. Maximum loading height | 8763 mm | 10. Maximum loading height | 7740 mm |
11. Maximum radius along ground level | 13182.6 mm | 11. Maximum radius along ground level | 11770 mm |
12. Maximum vertical wall digging depth | 7034.8 mm | 12. Maximum vertical wall digging depth | 6570 mm |
13. Maximum excavation depth | 9119.6 mm | 13. Maximum excavation depth | 7720 mm |