- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 792D LC vs. Hitachi ZX520LCH-3
John Deere 792D LC vs. Hitachi ZX520LCH-3
15 reasons to buy John Deere 792D LC:
Swing device
Rotation speed | 12 rev / min and 9 rev / min | 25 % more or 3 rev |
Operation
Hydraulic system overflow valve pressure | 34336 kPa and 34300 kPa | 0 % more or 36 kPa |
Hydraulic pump flow rate | 524 l/min and 720 l/min | 27 % less or 196 l/min |
Boom reach drive mechanism fluid volume | 9.5 l. and 6.5 l. | 32 % more or 3.0 l. |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Specific ground pressure | 49.2 kPa and 91 kPa | 46 % less or 41.8 kPa |
Maximum travel speed | 4.6 km/h and 4 km/h | 13 % more or 0.6 km/h |
Track shoes number per side | 50 and 49 | 2 % more or 1 |
Booms/sections features 2
Maximum vertical wall digging depth | 6740 mm and 4570 mm | 32 % more or 2170 mm |
Maximum excavation depth | 7870 mm and 6050 mm | 23 % more or 1820 mm |
Maximum radius along ground level | 11150 mm and 10490 mm | 6 % more or 660 mm |
Booms/sections features 1
Maximum excavation depth | 7230 mm and 5720 mm | 21 % more or 1510 mm |
Maximum radius along ground level | 10520 mm and 10190 mm | 3 % more or 330 mm |
Maximum vertical wall digging depth | 6100 mm and 4180 mm | 31 % more or 1920 mm |
16 reasons to buy Hitachi ZX520LCH-3:
Sizes
Counterweight ground clearance | 1435 mm and 1130 mm | 21 % more or 305 mm |
Width to outside of caterpillar track | 3520 mm and 3190 mm | 9 % more or 330 mm |
Clearance | 810 mm and 480 mm | 41 % more or 330 mm |
Shovel
Bucket initial volume | 1.9 m3 and 1.3 m3 | 32 % more or 0.6 m3 |
Operation
Generator current strength | 50 amperes and 45 amperes | 10 % more or 5 amperes |
Fuel Capacity | 725 l. and 310 l. | 57 % more or 415 l. |
Cooling system fluid volume | 55 l. and 29 l. | 47 % more or 26 l. |
Hydraulic system fluid volume | 560 l. and 300 l. | 46 % more or 260 l. |
Engine oil volume | 57 l. and 24 l. | 58 % more or 33 l. |
Motor
Torque measured at | 1500 rev / min and 1350 rev / min | 10 % more or 150 rev |
Maximum torque | 1580 Nm and 820 Nm | 48 % more or 760 Nm |
Effective power | 260 kW and 123 kW | 53 % more or 137 kW |
Displacement | 15.7 l. and 7.6 l. | 52 % more or 8.1 l. |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 2
Maximum loading height | 7520 mm and 7330 mm | 3 % more or 190 mm |
Booms/sections features 1
Maximum loading height | 7390 mm and 6980 mm | 6 % more or 410 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 3010 mm and 3645 mm |
Caterpillar track length on ground level | 4010 mm and 4250 mm |
Height to cab upper part | 2990 mm and 3520 mm |
Operation
Working weight | 27329 kg and 51700 kg |
Operating voltage | 24 V and 24 V |
Motor
Model | 6076A and AH-6WG1XYSA-01 |
Aspiration | turbocharging and turbocharging |
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Isuzu |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Track width | 2590 mm and 2920 mm |
Booms/sections features 2
Maximum cut height | 10170 mm and 10870 mm |
Booms/sections features 1
Maximum cut height | 9880 mm and 10730 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 3520 mm |
4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 4250 mm |
5. Clearance | 480 mm | 5. Clearance | 810 mm |
7. Height to cab upper part | 2990 mm | 7. Height to cab upper part | 3520 mm |
8. Rear platform swing radius | 3010 mm | 8. Rear platform swing radius | 3645 mm |
15. Counterweight ground clearance | 1130 mm | 15. Counterweight ground clearance | 1435 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 2920 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
9. Maximum cut height | 10170 mm | 9. Maximum cut height | 10870 mm |
10. Maximum loading height | 7330 mm | 10. Maximum loading height | 7520 mm |
11. Maximum radius along ground level | 11150 mm | 11. Maximum radius along ground level | 10490 mm |
12. Maximum vertical wall digging depth | 6740 mm | 12. Maximum vertical wall digging depth | 4570 mm |
13. Maximum excavation depth | 7870 mm | 13. Maximum excavation depth | 6050 mm |