- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 892D LC vs. Hitachi ZX870H-3
John Deere 892D LC vs. Hitachi ZX870H-3
11 reasons to buy John Deere 892D LC:
Swing device
Rotation speed | 12 rev / min and 7.3 rev / min | 39 % more or 4.7 rev |
Operation
Hydraulic system overflow valve pressure | 34340 kPa and 34300 kPa | 0 % more or 40 kPa |
Hydraulic pump flow rate | 546 l/min and 1056 l/min | 48 % less or 510 l/min |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Specific ground pressure | 56.3 kPa and 131 kPa | 57 % less or 74.7 kPa |
Track shoes number per side | 50 and 47 | 6 % more or 3 |
Maximum travel speed | 4.2 km/h and 4.1 km/h | 2 % more or 0.1 km/h |
Booms/sections features 3
Maximum vertical wall digging depth | 7370 mm and 6840 mm | 7 % more or 530 mm |
Booms/sections features 2
Maximum vertical wall digging depth | 6480 mm and 6090 mm | 6 % more or 390 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 5610 mm and 4100 mm | 27 % more or 1510 mm |
23 reasons to buy Hitachi ZX870H-3:
Sizes
Clearance | 890 mm and 480 mm | 46 % more or 410 mm |
Counterweight ground clearance | 1680 mm and 1190 mm | 29 % more or 490 mm |
Width to outside of caterpillar track | 4100 mm and 3190 mm | 22 % more or 910 mm |
Shovel
Bucket initial volume | 3.5 m3 and 1.3 m3 | 63 % more or 2.2 m3 |
Operation
Fuel Capacity | 1120 l. and 510 l. | 54 % more or 610 l. |
Cooling system fluid volume | 116 l. and 34 l. | 71 % more or 82 l. |
Hydraulic system fluid volume | 790 l. and 330 l. | 58 % more or 460 l. |
Engine oil volume | 57 l. and 24 l. | 58 % more or 33 l. |
Boom reach drive mechanism fluid volume | 15 l. and 10 l. | 33 % more or 5 l. |
Motor
Displacement | 15.7 l. and 7.6 l. | 52 % more or 8.1 l. |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Maximum torque | 2250 Nm and 827 Nm | 63 % more or 1423 Nm |
Effective power | 397 kW and 145 kW | 63 % more or 252 kW |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 3
Maximum radius along ground level | 13820 mm and 11680 mm | 15 % more or 2140 mm |
Maximum loading height | 9080 mm and 7470 mm | 18 % more or 1610 mm |
Maximum excavation depth | 8870 mm and 8180 mm | 8 % more or 690 mm |
Booms/sections features 2
Maximum excavation depth | 7820 mm and 7390 mm | 5 % more or 430 mm |
Maximum radius along ground level | 12510 mm and 10900 mm | 13 % more or 1610 mm |
Maximum loading height | 8180 mm and 7110 mm | 13 % more or 1070 mm |
Booms/sections features 1
Maximum loading height | 8130 mm and 6800 mm | 16 % more or 1330 mm |
Maximum excavation depth | 7140 mm and 6830 mm | 4 % more or 310 mm |
Maximum radius along ground level | 12020 mm and 10360 mm | 14 % more or 1660 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2990 mm and 3780 mm |
Rear platform swing radius | 3280 mm and 4600 mm |
Caterpillar track length on ground level | 4010 mm and 4590 mm |
Operation
Working weight | 30658 kg and 82100 kg |
Motor
Manufacturer | John Deere and Isuzu |
Model | 6466A and AH-6WG1XYSA-03 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Cylinders number | 6 and 6 |
Carrier
Shoe dimensions | 600 mm and 650 mm |
Track width | 2590 mm and 3450 mm |
Booms/sections features 3
Maximum cut height | 10590 mm and 13000 mm |
Unit load-transfer height | 3490 mm and 4570 mm |
Unit load-transfer length | 10990 mm and 14770 mm |
Booms/sections features 2
Maximum cut height | 10210 mm and 12130 mm |
Booms/sections features 1
Maximum cut height | 9830 mm and 12010 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 4100 mm |
4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 4590 mm |
5. Clearance | 480 mm | 5. Clearance | 890 mm |
7. Height to cab upper part | 2990 mm | 7. Height to cab upper part | 3780 mm |
8. Rear platform swing radius | 3280 mm | 8. Rear platform swing radius | 4600 mm |
15. Counterweight ground clearance | 1190 mm | 15. Counterweight ground clearance | 1680 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 3450 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 650 mm |
Booms/sections features 1
11. Maximum radius along ground level | 10900 mm | 11. Maximum radius along ground level | 13820 mm |
12. Maximum vertical wall digging depth | 6480 mm | 12. Maximum vertical wall digging depth | 6840 mm |
13. Maximum excavation depth | 7390 mm | 13. Maximum excavation depth | 8870 mm |
9. Maximum cut height | 9830 mm | 9. Maximum cut height | 13000 mm |
1. Unit load-transfer length | 11030 mm | 1. Unit load-transfer length | 14770 mm |
10. Maximum loading height | 6800 mm | 10. Maximum loading height | 9080 mm |
3. Unit load-transfer height | 3400 mm | 3. Unit load-transfer height | 4570 mm |