- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 992E vs. Hitachi ZX800
John Deere 992E vs. Hitachi ZX800
8 reasons to buy John Deere 992E:
Swing device
Rotation speed | 9 rev / min and 8.2 rev / min | 9 % more or 0.8 rev |
Shovel
Bucket minimum volume | 1.2 m3 and 1.3 m3 | 8 % less or 0.1 m3 |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Track shoes number per side | 53 and 51 | 4 % more or 2 |
Specific ground pressure | 59.9 kPa and 101 kPa | 41 % less or 41.1 kPa |
Maximum travel speed | 5.5 km/h and 4.3 km/h | 22 % more or 1.2 km/h |
Booms/sections features 1
Maximum excavation depth | 7260 mm and 7240 mm | 0 % more or 20 mm |
Maximum vertical wall digging depth | 5340 mm and 4340 mm | 19 % more or 1000 mm |
26 reasons to buy Hitachi ZX800:
Sizes
Width to outside of caterpillar track | 4360 mm and 3640 mm | 17 % more or 720 mm |
Clearance | 880 mm and 735 mm | 16 % more or 145 mm |
Counterweight ground clearance | 1590 mm and 1330 mm | 16 % more or 260 mm |
Shovel
Bucket initial volume | 3.4 m3 and 1.9 m3 | 44 % more or 1.5 m3 |
Maximum bucket volume | 3.8 m3 and 3.2 m3 | 16 % more or 0.6 m3 |
Operation
Hydraulic system overflow valve pressure | 34335.9 kPa and 29440 kPa | 14 % more or 4895.9 kPa |
Hydraulic pump flow rate | 30.2 l/min and 720 l/min | 96 % less or 689.8 l/min |
Fuel Capacity | 901 l. and 590 l. | 35 % more or 311 l. |
Cooling system fluid volume | 107 l. and 38 l. | 64 % more or 69 l. |
Hydraulic system fluid volume | 670 l. and 520 l. | 22 % more or 150 l. |
Engine oil volume | 55 l. and 34 l. | 38 % more or 21 l. |
Boom reach drive mechanism fluid volume | 15 l. and 5.7 l. | 62 % more or 9.3 l. |
Motor
Displacement | 15.7 l. and 10.1 l. | 36 % more or 5.6 l. |
Torque measured at | 1500 rev / min and 1300 rev / min | 13 % more or 200 rev |
Maximum torque | 1863 Nm and 1295 Nm | 30 % more or 568 Nm |
Effective power | 338.5 kW and 213 kW | 37 % more or 125.5 kW |
Booms/sections features 3
Maximum excavation depth | 9670 mm and 9110 mm | 6 % more or 560 mm |
Maximum radius along ground level | 14870 mm and 13180 mm | 11 % more or 1690 mm |
Maximum loading height | 9210 mm and 8770 mm | 5 % more or 440 mm |
Maximum vertical wall digging depth | 8970 mm and 8450 mm | 6 % more or 520 mm |
Booms/sections features 2
Maximum excavation depth | 8880 mm and 8260 mm | 7 % more or 620 mm |
Maximum radius along ground level | 13990 mm and 12270 mm | 12 % more or 1720 mm |
Maximum loading height | 8530 mm and 7780 mm | 9 % more or 750 mm |
Maximum vertical wall digging depth | 7790 mm and 7040 mm | 10 % more or 750 mm |
Booms/sections features 1
Maximum radius along ground level | 12410 mm and 11160 mm | 10 % more or 1250 mm |
Maximum loading height | 7820 mm and 7040 mm | 10 % more or 780 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3210 mm and 3520 mm |
Rear platform swing radius | 3470 mm and 4300 mm |
Caterpillar track length on ground level | 4470 mm and 5110 mm |
Operation
Operating voltage | 24 V and 12 V |
Working weight | 44270 kg and 73900 kg |
Motor
Manufacturer | John Deere and Isuzu |
Model | 6101A and BB-6WG1T |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Cylinders number | 6 and 6 |
Carrier
Shoe dimensions | 750 mm and 650 mm |
Support rollers number on either side | 3 and 3 |
Rolling bearings number on either side | 9 and 9 |
Track width | 2890 mm and 3450 mm |
Booms/sections features 3
Unit load-transfer height | 4660 mm and 4480 mm |
Unit load-transfer length | 11700 mm and 14320 mm |
Maximum cut height | 11850 mm and 13310 mm |
Booms/sections features 2
Unit load-transfer height | 3480 mm and 4480 mm |
Unit load-transfer length | 11790 mm and 14320 mm |
Maximum cut height | 11180 mm and 12530 mm |
Booms/sections features 1
Unit load-transfer height | 3600 mm and 4480 mm |
Unit load-transfer length | 11880 mm and 14320 mm |
Maximum cut height | 10270 mm and 11680 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3640 mm | 2. Width to outside of caterpillar track | 4360 mm |
4. Caterpillar track length on ground level | 4470 mm | 4. Caterpillar track length on ground level | 5110 mm |
5. Clearance | 735 mm | 5. Clearance | 880 mm |
7. Height to cab upper part | 3210 mm | 7. Height to cab upper part | 3520 mm |
8. Rear platform swing radius | 3470 mm | 8. Rear platform swing radius | 4300 mm |
15. Counterweight ground clearance | 1330 mm | 15. Counterweight ground clearance | 1590 mm |
Carrier
6. Track width | 2890 mm | 6. Track width | 3450 mm |
14. Shoe dimensions | 750 mm | 14. Shoe dimensions | 650 mm |
Booms/sections features 1
10. Maximum loading height | 8770 mm | 10. Maximum loading height | 9770 mm |
9. Maximum cut height | 11850 mm | 9. Maximum cut height | 14490 mm |
11. Maximum radius along ground level | 13180 mm | 11. Maximum radius along ground level | 15700 mm |
13. Maximum excavation depth | 9110 mm | 13. Maximum excavation depth | 10550 mm |
1. Unit load-transfer length | 11880 mm | 1. Unit load-transfer length | 14320 mm |
12. Maximum vertical wall digging depth | 8450 mm | 12. Maximum vertical wall digging depth | 8970 mm |
3. Unit load-transfer height | 3600 mm | 3. Unit load-transfer height | 4480 mm |