vs.

      Kato HD700VII vs. New Holland E245

      20 reasons to buy Kato HD700VII:

      Swing device

      Rotation speed 13.5 rev / min and 12.7 rev / min 6 % more or 0.8 rev

      Sizes

      Width to outside of caterpillar track 2820 mm and 2500 mm 11 % more or 320 mm

      Operation

      Hydraulic system fluid volume 280 l. and 270 l. 4 % more or 10 l.
      Fuel Capacity 320 l. and 292 l. 9 % more or 28 l.

      Motor

      Torque measured at 1700 rev / min and 1400 rev / min 18 % more or 300 rev
      Power measured at 2200 rev / min and 2150 rev / min 2 % more or 50 rev

      Carrier

      Specific ground pressure 43.1 kPa and 63 kPa 32 % less or 19.9 kPa
      Maximum travel speed 5.5 km/h and 5 km/h 9 % more or 0.5 km/h

      Booms/sections features 3

      Maximum vertical wall digging depth 7100 mm and 6399 mm 10 % more or 701 mm
      Maximum excavation depth 7630 mm and 6575 mm 14 % more or 1055 mm
      Maximum radius along ground level 10770 mm and 9765 mm 9 % more or 1005 mm
      Maximum loading height 7340 mm and 7014 mm 4 % more or 326 mm

      Booms/sections features 2

      Maximum excavation depth 6620 mm and 6035 mm 9 % more or 585 mm
      Maximum radius along ground level 9820 mm and 9270 mm 6 % more or 550 mm
      Maximum loading height 6900 mm and 6767 mm 2 % more or 133 mm
      Maximum vertical wall digging depth 6100 mm and 5832 mm 4 % more or 268 mm

      Booms/sections features 1

      Maximum loading height 6730 mm and 6594 mm 2 % more or 136 mm
      Maximum vertical wall digging depth 5600 mm and 5486 mm 2 % more or 114 mm
      Maximum excavation depth 6120 mm and 5715 mm 7 % more or 405 mm
      Maximum radius along ground level 9370 mm and 8952 mm 4 % more or 418 mm

      10 reasons to buy New Holland E245:

      Sizes

      Clearance 507 mm and 450 mm 11 % more or 57 mm
      Counterweight ground clearance 1168 mm and 1010 mm 14 % more or 158 mm

      Shovel

      Maximum bucket volume 1.3 m3 and 1.2 m3 8 % more or 0.1 m3

      Operation

      Cooling system fluid volume 24 l. and 22 l. 8 % more or 2 l.
      Generator current strength 70 amperes and 30 amperes 57 % more or 40 amperes
      Hydraulic system overflow valve pressure 34300 kPa and 32819 kPa 4 % more or 1481 kPa
      Hydraulic pump flow rate 420 l/min and 460 l/min 9 % less or 40 l/min

      Motor

      Maximum torque 660 Nm and 431.2 Nm 35 % more or 228.8 Nm
      Displacement 5.9 l. and 4.9 l. 17 % more or 1.0 l.

      Carrier

      Rolling bearings number on either side 8 and 7 12 % more or 1

      Neutral reasons:

      Sizes

      Height to cab upper part 2910 mm and 3076 mm
      Rear platform swing radius 2790 mm and 2750 mm
      Caterpillar track length on ground level 3200 mm and 3420 mm

      Operation

      Engine oil volume 17 l. and 17 l.
      Operating voltage 24 V and 24 V
      Working weight 18500 kg and 24420 kg

      Motor

      Cylinders number 6 and 6
      Model 6D31T and CNH F4BE0684

      Carrier

      Shoe dimensions 600 mm and 550 mm
      Support rollers number on either side 2 and 2
      Track width 2220 mm and 2000 mm

      Booms/sections features 3

      Maximum cut height 10270 mm and 9776 mm

      Booms/sections features 2

      Unit load-transfer length 9570 mm and 9490 mm
      Maximum cut height 9780 mm and 9556 mm
      Unit load-transfer height 2910 mm and 3076 mm

      Booms/sections features 1

      Maximum cut height 9640 mm and 9341 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2820 mm 2. Width to outside of caterpillar track 2500 mm
      4. Caterpillar track length on ground level 3200 mm 4. Caterpillar track length on ground level 3420 mm
      5. Clearance 450 mm 5. Clearance 507 mm
      7. Height to cab upper part 2910 mm 7. Height to cab upper part 3076 mm
      8. Rear platform swing radius 2790 mm 8. Rear platform swing radius 2750 mm
      15. Counterweight ground clearance 1010 mm 15. Counterweight ground clearance 1168 mm

      Carrier

      6. Track width 2220 mm 6. Track width 2000 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 550 mm

      Booms/sections features 1

      13. Maximum excavation depth 6120 mm 13. Maximum excavation depth 6035 mm
      12. Maximum vertical wall digging depth 5600 mm 12. Maximum vertical wall digging depth 5832 mm
      9. Maximum cut height 9780 mm 9. Maximum cut height 9685 mm
      10. Maximum loading height 6900 mm 10. Maximum loading height 7041 mm
      11. Maximum radius along ground level 9820 mm 11. Maximum radius along ground level 10165 mm
      1. Unit load-transfer length 9570 mm 1. Unit load-transfer length 9400 mm
      3. Unit load-transfer height 2910 mm 3. Unit load-transfer height 3076 mm