- Home/
- Comparison/
- Hydraulic Shovel/
- Kato HD800VIILC vs. Hitachi ZX225US
Kato HD800VIILC vs. Hitachi ZX225US
17 reasons to buy Kato HD800VIILC:
Sizes
Clearance | 480 mm and 450 mm | 6 % more or 30 mm |
Counterweight ground clearance | 1085 mm and 1005 mm | 7 % more or 80 mm |
Width to outside of caterpillar track | 3200 mm and 2800 mm | 12 % more or 400 mm |
Shovel
Maximum bucket volume | 1.3 m3 and 1.2 m3 | 8 % more or 0.1 m3 |
Operation
Fuel Capacity | 320 l. and 270 l. | 16 % more or 50 l. |
Cooling system fluid volume | 25 l. and 23 l. | 8 % more or 2 l. |
Hydraulic system fluid volume | 290 l. and 200 l. | 31 % more or 90 l. |
Motor
Displacement | 6.6 l. and 6.5 l. | 2 % more or 0.1 l. |
Carrier
Track shoes number per side | 55 and 46 | 16 % more or 9 |
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Specific ground pressure | 43.2 kPa and 52 kPa | 17 % less or 8.8 kPa |
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Booms/sections features 2
Maximum vertical wall digging depth | 6240 mm and 5920 mm | 5 % more or 320 mm |
Maximum radius along ground level | 9960 mm and 9810 mm | 2 % more or 150 mm |
Booms/sections features 1
Maximum excavation depth | 6230 mm and 6100 mm | 2 % more or 130 mm |
Maximum radius along ground level | 9520 mm and 9140 mm | 4 % more or 380 mm |
Maximum vertical wall digging depth | 5740 mm and 5000 mm | 13 % more or 740 mm |
15 reasons to buy Hitachi ZX225US:
Swing device
Rotation speed | 13.3 rev / min and 10.5 rev / min | 21 % more or 2.8 rev |
Operation
Generator current strength | 50 amperes and 30 amperes | 40 % more or 20 amperes |
Hydraulic system overflow valve pressure | 34335.9 kPa and 32819 kPa | 4 % more or 1516.9 kPa |
Hydraulic pump flow rate | 388 l/min and 462 l/min | 16 % less or 74 l/min |
Engine oil volume | 25 l. and 20 l. | 20 % more or 5 l. |
Boom reach drive mechanism fluid volume | 6.2 l. and 5 l. | 19 % more or 1.2 l. |
Motor
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Maximum torque | 550 Nm and 515.2 Nm | 6 % more or 34.8 Nm |
Booms/sections features 3
Maximum excavation depth | 8290 mm and 7710 mm | 7 % more or 580 mm |
Maximum radius along ground level | 11200 mm and 10870 mm | 3 % more or 330 mm |
Maximum loading height | 9190 mm and 7070 mm | 23 % more or 2120 mm |
Maximum vertical wall digging depth | 7350 mm and 7240 mm | 1 % more or 110 mm |
Booms/sections features 2
Maximum loading height | 8190 mm and 6700 mm | 18 % more or 1490 mm |
Maximum excavation depth | 6790 mm and 6720 mm | 1 % more or 70 mm |
Booms/sections features 1
Maximum loading height | 7640 mm and 6520 mm | 15 % more or 1120 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 3040 mm and 1680 mm |
Caterpillar track length on ground level | 3780 mm and 3370 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 21500 kg and 23000 kg |
Motor
Manufacturer | Mitsubishi and Isuzu |
Model | 6D14-T and AA-6BGIT |
Power measured at | 2100 rev / min and 2100 rev / min |
Aspiration | turbocharging and Turbocharging with intercooler |
Cylinders number | 6 and 6 |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Track width | 2600 mm and 2200 mm |
Booms/sections features 3
Maximum cut height | 10160 mm and 12100 mm |
Booms/sections features 2
Unit load-transfer height | 2940 mm and 2990 mm |
Unit load-transfer length | 9780 mm and 8920 mm |
Maximum cut height | 9800 mm and 11100 mm |
Booms/sections features 1
Maximum cut height | 9610 mm and 10550 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3200 mm | 2. Width to outside of caterpillar track | 2800 mm |
4. Caterpillar track length on ground level | 3780 mm | 4. Caterpillar track length on ground level | 3370 mm |
5. Clearance | 480 mm | 5. Clearance | 450 mm |
8. Rear platform swing radius | 3040 mm | 8. Rear platform swing radius | 1680 mm |
15. Counterweight ground clearance | 1085 mm | 15. Counterweight ground clearance | 1005 mm |
Carrier
6. Track width | 2600 mm | 6. Track width | 2200 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
9. Maximum cut height | 9800 mm | 9. Maximum cut height | 12100 mm |
10. Maximum loading height | 6700 mm | 10. Maximum loading height | 9190 mm |
11. Maximum radius along ground level | 9960 mm | 11. Maximum radius along ground level | 11200 mm |
1. Unit load-transfer length | 9780 mm | 1. Unit load-transfer length | 9000 mm |
12. Maximum vertical wall digging depth | 6240 mm | 12. Maximum vertical wall digging depth | 7350 mm |
3. Unit load-transfer height | 2940 mm | 3. Unit load-transfer height | 3430 mm |
13. Maximum excavation depth | 6720 mm | 13. Maximum excavation depth | 8290 mm |