- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC160-6 vs. Doosan DX225LC
Komatsu PC160-6 vs. Doosan DX225LC
9 reasons to buy Komatsu PC160-6:
Swing device
Rotation speed | 12 rev / min and 11 rev / min | 8 % more or 1 rev |
Operation
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Hydraulic pump flow rate | 276 l/min and 413 l/min | 33 % less or 137 l/min |
Motor
Power measured at | 2100 rev / min and 1900 rev / min | 10 % more or 200 rev |
Booms/sections features 5
Maximum loading height | 6350 mm and 6300 mm | 1 % more or 50 mm |
Booms/sections features 4
Maximum excavation depth | 6290 mm and 5355 mm | 15 % more or 935 mm |
Maximum radius along ground level | 9080 mm and 8380 mm | 8 % more or 700 mm |
Maximum loading height | 6430 mm and 6085 mm | 5 % more or 345 mm |
Maximum vertical wall digging depth | 5783 mm and 4435 mm | 23 % more or 1348 mm |
31 reasons to buy Doosan DX225LC:
Sizes
Width to outside of caterpillar track | 2990 mm and 2490 mm | 17 % more or 500 mm |
Clearance | 480 mm and 442 mm | 8 % more or 38 mm |
Counterweight ground clearance | 1055 mm and 989 mm | 6 % more or 66 mm |
Operation
Fuel Capacity | 400 l. and 250 l. | 37 % more or 150 l. |
Cooling system fluid volume | 24 l. and 20 l. | 17 % more or 4 l. |
Hydraulic system fluid volume | 330 l. and 120 l. | 64 % more or 210 l. |
Engine oil volume | 27 l. and 16 l. | 41 % more or 11 l. |
Boom reach drive mechanism fluid volume | 5 l. and 4 l. | 20 % more or 1 l. |
Motor
Full power | 115.6 kW and 84.7 kW | 27 % more or 30.9 kW |
Effective power | 110.4 kW and 80 kW | 28 % more or 30.4 kW |
Displacement | 5.9 l. and 3.9 l. | 34 % more or 2.0 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Support rollers number on either side | 2 and 1 | 50 % more or 1 |
Rolling bearings number on either side | 9 and 6 | 33 % more or 3 |
Specific ground pressure | 44.1 kPa and 51 kPa | 14 % less or 6.9 kPa |
Track shoes number per side | 49 and 41 | 16 % more or 8 |
Booms/sections features 5
Maximum vertical wall digging depth | 4880 mm and 4113 mm | 16 % more or 767 mm |
Maximum excavation depth | 5755 mm and 5088 mm | 12 % more or 667 mm |
Maximum radius along ground level | 8760 mm and 8232 mm | 6 % more or 528 mm |
Booms/sections features 3
Maximum loading height | 7150 mm and 6280 mm | 12 % more or 870 mm |
Maximum vertical wall digging depth | 6010 mm and 5730 mm | 5 % more or 280 mm |
Maximum excavation depth | 7220 mm and 6000 mm | 17 % more or 1220 mm |
Maximum radius along ground level | 10230 mm and 8960 mm | 12 % more or 1270 mm |
Booms/sections features 2
Maximum excavation depth | 6620 mm and 5645 mm | 15 % more or 975 mm |
Maximum radius along ground level | 9730 mm and 8515 mm | 12 % more or 1215 mm |
Maximum loading height | 6990 mm and 6190 mm | 11 % more or 800 mm |
Maximum vertical wall digging depth | 5640 mm and 5076 mm | 10 % more or 564 mm |
Booms/sections features 1
Maximum excavation depth | 6110 mm and 5240 mm | 14 % more or 870 mm |
Maximum radius along ground level | 9300 mm and 8190 mm | 12 % more or 1110 mm |
Maximum loading height | 6830 mm and 6090 mm | 11 % more or 740 mm |
Maximum vertical wall digging depth | 5390 mm and 4546 mm | 16 % more or 844 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2829 mm and 2975 mm |
Rear platform swing radius | 2417 mm and 2750 mm |
Caterpillar track length on ground level | 2880 mm and 3650 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 16300 kg and 21500 kg |
Motor
Manufacturer | Komatsu and Doosan |
Model | SA4D102E and DL06 |
Aspiration | turbocharging and Turbocharged engine with intermediate cooling of charging air by oncoming air flow |
Carrier
Shoe dimensions | 500 mm and 600 mm |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Booms/sections features 5
Maximum cut height | 9026 mm and 9065 mm |
Booms/sections features 4
Maximum cut height | 9015 mm and 8845 mm |
Unit load-transfer height | 3115 mm and 3210 mm |
Unit load-transfer length | 8625 mm and 9080 mm |
Booms/sections features 3
Maximum cut height | 8865 mm and 9870 mm |
Unit load-transfer height | 3060 mm and 3290 mm |
Unit load-transfer length | 8570 mm and 9500 mm |
Booms/sections features 2
Unit load-transfer height | 2960 mm and 3005 mm |
Unit load-transfer length | 8565 mm and 9485 mm |
Maximum cut height | 8800 mm and 9750 mm |
Booms/sections features 1
Unit load-transfer height | 2945 mm and 3110 mm |
Unit load-transfer length | 8565 mm and 3045 mm |
Maximum cut height | 8735 mm and 9630 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2490 mm | 2. Width to outside of caterpillar track | 2990 mm |
4. Caterpillar track length on ground level | 2880 mm | 4. Caterpillar track length on ground level | 3650 mm |
5. Clearance | 442 mm | 5. Clearance | 480 mm |
7. Height to cab upper part | 2829 mm | 7. Height to cab upper part | 2975 mm |
8. Rear platform swing radius | 2417 mm | 8. Rear platform swing radius | 2750 mm |
15. Counterweight ground clearance | 989 mm | 15. Counterweight ground clearance | 1055 mm |
Carrier
14. Shoe dimensions | 500 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
10. Maximum loading height | 6190 mm | 10. Maximum loading height | 7150 mm |
13. Maximum excavation depth | 5240 mm | 13. Maximum excavation depth | 7220 mm |
11. Maximum radius along ground level | 8515 mm | 11. Maximum radius along ground level | 10230 mm |
1. Unit load-transfer length | 8565 mm | 1. Unit load-transfer length | 9080 mm |
3. Unit load-transfer height | 2960 mm | 3. Unit load-transfer height | 3210 mm |
9. Maximum cut height | 8800 mm | 9. Maximum cut height | 8845 mm |
12. Maximum vertical wall digging depth | 5076 mm | 12. Maximum vertical wall digging depth | 6010 mm |