- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC240NLC-7SLF vs. Komatsu PC600LC-6
Komatsu PC240NLC-7SLF vs. Komatsu PC600LC-6
10 reasons to buy Komatsu PC240NLC-7SLF:
Swing device
Rotation speed | 11.7 rev / min and 8.3 rev / min | 29 % more or 3.4 rev |
Operation
Hydraulic pump flow rate | 440 l/min and 820 l/min | 46 % less or 380 l/min |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Specific ground pressure | 58.8 kPa and 94.1 kPa | 38 % less or 35.3 kPa |
Maximum travel speed | 5.5 km/h and 5.4 km/h | 2 % more or 0.1 km/h |
Hook traction force | 201.7 kN and 414.8 kN | 51 % less or 213.1 kN |
Booms/sections features 1
Maximum radius along ground level | 18250 mm and 12800 mm | 30 % more or 5450 mm |
Maximum loading height | 12860 mm and 7960 mm | 38 % more or 4900 mm |
Maximum vertical wall digging depth | 10385 mm and 7510 mm | 28 % more or 2875 mm |
Maximum excavation depth | 14580 mm and 8490 mm | 42 % more or 6090 mm |
13 reasons to buy Komatsu PC600LC-6:
Sizes
Width to outside of caterpillar track | 3900 mm and 2980 mm | 24 % more or 920 mm |
Clearance | 780 mm and 440 mm | 44 % more or 340 mm |
Counterweight ground clearance | 1365 mm and 1100 mm | 19 % more or 265 mm |
Operation
Fuel Capacity | 880 l. and 400 l. | 55 % more or 480 l. |
Cooling system fluid volume | 57 l. and 30.9 l. | 46 % more or 26.1 l. |
Hydraulic system fluid volume | 370 l. and 143 l. | 61 % more or 227 l. |
Engine oil volume | 42 l. and 24 l. | 43 % more or 18 l. |
Boom reach drive mechanism fluid volume | 13.1 l. and 6.6 l. | 50 % more or 6.5 l. |
Generator current strength | 70 amperes and 60 amperes | 14 % more or 10 amperes |
Motor
Displacement | 15.2 l. and 5.9 l. | 61 % more or 9.3 l. |
Effective power | 287 kW and 125.3 kW | 56 % more or 161.7 kW |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Track shoes number per side | 52 and 49 | 6 % more or 3 |
Neutral reasons:
Sizes
Height to cab upper part | 3015 mm and 3310 mm |
Rear platform swing radius | 2940 mm and 3675 mm |
Caterpillar track length on ground level | 3655 mm and 4600 mm |
Operation
Working weight | 26119 kg and 57780 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Komatsu and Komatsu |
Cylinders number | 6 and 6 |
Model | SAA6D102E-2 and SA6D140E-3 |
Carrier
Rolling bearings number on either side | 9 and 9 |
Shoe dimensions | 600 mm and 600 mm |
Track width | 2380 mm and 2850 mm |
Booms/sections features 1
Maximum cut height | 14970 mm and 11880 mm |
Unit load-transfer height | 3230 mm and 4300 mm |
Unit load-transfer length | 14400 mm and 12810 mm |
Images
Sizes
7. Height to cab upper part | 3015 mm | 7. Height to cab upper part | 3310 mm |
4. Caterpillar track length on ground level | 3655 mm | 4. Caterpillar track length on ground level | 4600 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 3675 mm |
5. Clearance | 440 mm | 5. Clearance | 780 mm |
15. Counterweight ground clearance | 1100 mm | 15. Counterweight ground clearance | 1365 mm |
2. Width to outside of caterpillar track | 2980 mm | 2. Width to outside of caterpillar track | 3900 mm |
Carrier
6. Track width | 2380 mm | 6. Track width | 2850 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 14400 mm | 1. Unit load-transfer length | 12810 mm |
3. Unit load-transfer height | 3230 mm | 3. Unit load-transfer height | 4300 mm |
9. Maximum cut height | 14970 mm | 9. Maximum cut height | 11800 mm |
10. Maximum loading height | 12860 mm | 10. Maximum loading height | 7960 mm |
11. Maximum radius along ground level | 18250 mm | 11. Maximum radius along ground level | 12800 mm |
12. Maximum vertical wall digging depth | 10385 mm | 12. Maximum vertical wall digging depth | 7510 mm |
13. Maximum excavation depth | 14580 mm | 13. Maximum excavation depth | 8490 mm |