- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC600LC-6 vs. Terex TXC470LC-1
Komatsu PC600LC-6 vs. Terex TXC470LC-1
14 reasons to buy Komatsu PC600LC-6:
Sizes
Clearance | 780 mm and 760 mm | 3 % more or 20 mm |
Shovel
Bucket initial volume | 2.7 m3 and 2.2 m3 | 19 % more or 0.5 m3 |
Maximum bucket volume | 3.5 m3 and 2.9 m3 | 17 % more or 0.6 m3 |
Operation
Fuel Capacity | 880 l. and 620 l. | 30 % more or 260 l. |
Engine oil volume | 42 l. and 28 l. | 33 % more or 14 l. |
Boom reach drive mechanism fluid volume | 13.1 l. and 4 l. | 69 % more or 9.1 l. |
Motor
Displacement | 15.2 l. and 11.1 l. | 27 % more or 4.1 l. |
Effective power | 287 kW and 232.7 kW | 19 % more or 54.3 kW |
Carrier
Maximum travel speed | 5.4 km/h and 5 km/h | 7 % more or 0.4 km/h |
Booms/sections features 2
Maximum vertical wall digging depth | 5540 mm and 4930 mm | 11 % more or 610 mm |
Booms/sections features 1
Maximum loading height | 7960 mm and 7900 mm | 1 % more or 60 mm |
Maximum vertical wall digging depth | 7510 mm and 4370 mm | 42 % more or 3140 mm |
Maximum excavation depth | 8490 mm and 7790 mm | 8 % more or 700 mm |
Maximum radius along ground level | 12800 mm and 11850 mm | 7 % more or 950 mm |
12 reasons to buy Terex TXC470LC-1:
Swing device
Rotation speed | 10.3 rev / min and 8.3 rev / min | 19 % more or 2.0 rev |
Sizes
Counterweight ground clearance | 1460 mm and 1365 mm | 7 % more or 95 mm |
Shovel
Bucket minimum volume | 1.5 m3 and 2.4 m3 | 37 % less or 0.9 m3 |
Operation
Hydraulic pump flow rate | 718 l/min and 820 l/min | 12 % less or 102 l/min |
Cooling system fluid volume | 58 l. and 57 l. | 2 % more or 1 l. |
Hydraulic system fluid volume | 490 l. and 370 l. | 24 % more or 120 l. |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Specific ground pressure | 79.3 kPa and 94.1 kPa | 16 % less or 14.8 kPa |
Track shoes number per side | 53 and 52 | 2 % more or 1 |
Booms/sections features 2
Maximum excavation depth | 8420 mm and 7000 mm | 17 % more or 1420 mm |
Maximum radius along ground level | 12410 mm and 11260 mm | 9 % more or 1150 mm |
Maximum loading height | 8070 mm and 7200 mm | 11 % more or 870 mm |
Neutral reasons:
Sizes
Width to outside of caterpillar track | 3900 mm and 3900 mm |
Height to cab upper part | 3310 mm and 3350 mm |
Rear platform swing radius | 3675 mm and 3665 mm |
Caterpillar track length on ground level | 4600 mm and 4470 mm |
Operation
Working weight | 57780 kg and 46901.5 kg |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Komatsu and Daewoo |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging, with subsequent cooling of charging air by oncoming air flow |
Model | SA6D140E-3 and DE12TIS |
Cylinders number | 6 and 6 |
Carrier
Rolling bearings number on either side | 9 and 9 |
Track width | 2850 mm and 3300 mm |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 3 and 3 |
Booms/sections features 2
Maximum cut height | 11050 mm and 11230 mm |
Booms/sections features 1
Maximum cut height | 11880 mm and 11080 mm |
Unit load-transfer height | 4300 mm and 3705 mm |
Unit load-transfer length | 12810 mm and 12110 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3900 mm | 2. Width to outside of caterpillar track | 3900 mm |
4. Caterpillar track length on ground level | 4600 mm | 4. Caterpillar track length on ground level | 4470 mm |
5. Clearance | 780 mm | 5. Clearance | 760 mm |
7. Height to cab upper part | 3310 mm | 7. Height to cab upper part | 3350 mm |
8. Rear platform swing radius | 3675 mm | 8. Rear platform swing radius | 3665 mm |
15. Counterweight ground clearance | 1365 mm | 15. Counterweight ground clearance | 1460 mm |
Carrier
6. Track width | 2850 mm | 6. Track width | 3300 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 7510 mm | 12. Maximum vertical wall digging depth | 4370 mm |
3. Unit load-transfer height | 4300 mm | 3. Unit load-transfer height | 3705 mm |
13. Maximum excavation depth | 8490 mm | 13. Maximum excavation depth | 7790 mm |
9. Maximum cut height | 11880 mm | 9. Maximum cut height | 11230 mm |
10. Maximum loading height | 7960 mm | 10. Maximum loading height | 8070 mm |
11. Maximum radius along ground level | 12800 mm | 11. Maximum radius along ground level | 12410 mm |
1. Unit load-transfer length | 11390 mm | 1. Unit load-transfer length | 12110 mm |