- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC750SE-6 vs. Komatsu PC200-8
Komatsu PC750SE-6 vs. Komatsu PC200-8
18 reasons to buy Komatsu PC750SE-6:
Sizes
| Width to outside of caterpillar track | 4110 mm and 3000 mm | 27 % more or 1110 mm |
| Clearance | 840 mm and 440 mm | 48 % more or 400 mm |
| Counterweight ground clearance | 1555 mm and 1085 mm | 30 % more or 470 mm |
Shovel
| Bucket initial volume | 4 m3 and 1 m3 | 75 % more or 3 m3 |
| Maximum bucket volume | 4.5 m3 and 1.2 m3 | 73 % more or 3.3 m3 |
Operation
| Hydraulic system fluid volume | 440 l. and 135 l. | 69 % more or 305 l. |
| Engine oil volume | 38 l. and 23.1 l. | 39 % more or 14.9 l. |
| Boom reach drive mechanism fluid volume | 30 l. and 6.6 l. | 78 % more or 23.4 l. |
| Fuel Capacity | 880 l. and 400 l. | 55 % more or 480 l. |
| Cooling system fluid volume | 85 l. and 20.4 l. | 76 % more or 64.6 l. |
Motor
| Displacement | 15.2 l. and 6.7 l. | 56 % more or 8.5 l. |
| Effective power | 331 kW and 110 kW | 67 % more or 221 kW |
Carrier
| Track shoes number per side | 47 and 45 | 4 % more or 2 |
| Support rollers number on either side | 3 and 2 | 33 % more or 1 |
| Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Booms/sections features 1
| Maximum excavation depth | 7015 mm and 6095 mm | 13 % more or 920 mm |
| Maximum radius along ground level | 11865 mm and 9190 mm | 23 % more or 2675 mm |
| Maximum loading height | 7565 mm and 6890 mm | 9 % more or 675 mm |
6 reasons to buy Komatsu PC200-8:
Swing device
| Rotation speed | 12.4 rev / min and 5.7 rev / min | 54 % more or 6.7 rev |
Operation
| Hydraulic system overflow valve pressure | 37231.7 kPa and 31381.3 kPa | 16 % more or 5850.4 kPa |
| Hydraulic pump flow rate | 439.1 l/min and 1008 l/min | 56 % less or 568.9 l/min |
Motor
| Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
| Maximum travel speed | 5.5 km/h and 4.2 km/h | 24 % more or 1.3 km/h |
Booms/sections features 1
| Maximum vertical wall digging depth | 5430 mm and 4930 mm | 9 % more or 500 mm |
Neutral reasons:
Sizes
| Height to cab upper part | 3515 mm and 3040 mm |
| Rear platform swing radius | 4300 mm and 2750 mm |
| Caterpillar track length on ground level | 4500 mm and 3275 mm |
Operation
| Working weight | 76245 kg and 20010 kg |
Motor
| Aspiration | turbocharging and turbocharging and cooling at the outlet |
| Cylinders number | 6 and 6 |
| Manufacturer | Komatsu and Komatsu |
| Model | SAA6D140E-2 and SAA6D107E-1 |
Carrier
| Track width | 3500 mm and 2200 mm |
| Shoe dimensions | 610 mm and 800 mm |
Booms/sections features 1
| Unit load-transfer height | 4705 mm and 3190 mm |
| Unit load-transfer length | 12870 mm and 5700 mm |
| Maximum cut height | 11510 mm and 9800 mm |
Images
Sizes
| 2. Width to outside of caterpillar track | 4110 mm | 2. Width to outside of caterpillar track | 3000 mm |
| 4. Caterpillar track length on ground level | 4500 mm | 4. Caterpillar track length on ground level | 3275 mm |
| 5. Clearance | 840 mm | 5. Clearance | 440 mm |
| 7. Height to cab upper part | 3515 mm | 7. Height to cab upper part | 3040 mm |
| 8. Rear platform swing radius | 4300 mm | 8. Rear platform swing radius | 2750 mm |
| 15. Counterweight ground clearance | 1555 mm | 15. Counterweight ground clearance | 1085 mm |
Carrier
| 6. Track width | 3500 mm | 6. Track width | 2200 mm |
| 14. Shoe dimensions | 610 mm | 14. Shoe dimensions | 800 mm |
Booms/sections features 1
| 10. Maximum loading height | 7565 mm | 10. Maximum loading height | 6890 mm |
| 11. Maximum radius along ground level | 11865 mm | 11. Maximum radius along ground level | 9190 mm |
| 12. Maximum vertical wall digging depth | 4930 mm | 12. Maximum vertical wall digging depth | 5430 mm |
| 13. Maximum excavation depth | 7015 mm | 13. Maximum excavation depth | 6095 mm |
| 1. Unit load-transfer length | 12870 mm | 1. Unit load-transfer length | 4815 mm |
| 3. Unit load-transfer height | 4705 mm | 3. Unit load-transfer height | 3040 mm |
| 9. Maximum cut height | 11510 mm | 9. Maximum cut height | 10000 mm |