- Home/
- Comparison/
- Hydraulic Shovel/
- Komatsu PC750SE-6 vs. Komatsu PC600LC-8
Komatsu PC750SE-6 vs. Komatsu PC600LC-8
8 reasons to buy Komatsu PC750SE-6:
Sizes
Clearance | 840 mm and 780 mm | 7 % more or 60 mm |
Width to outside of caterpillar track | 4110 mm and 3490 mm | 15 % more or 620 mm |
Counterweight ground clearance | 1555 mm and 1365 mm | 12 % more or 190 mm |
Shovel
Bucket initial volume | 4 m3 and 2.7 m3 | 32 % more or 1.3 m3 |
Operation
Cooling system fluid volume | 85 l. and 58 l. | 32 % more or 27 l. |
Hydraulic system fluid volume | 440 l. and 360 l. | 18 % more or 80 l. |
Boom reach drive mechanism fluid volume | 30 l. and 26 l. | 13 % more or 4 l. |
Motor
Effective power | 331 kW and 320 kW | 3 % more or 11 kW |
11 reasons to buy Komatsu PC600LC-8:
Swing device
Rotation speed | 8.3 rev / min and 5.7 rev / min | 31 % more or 2.6 rev |
Operation
Engine oil volume | 40 l. and 38 l. | 5 % more or 2 l. |
Hydraulic system overflow valve pressure | 34335.9 kPa and 31381.3 kPa | 9 % more or 2954.6 kPa |
Hydraulic pump flow rate | 817.6 l/min and 1008 l/min | 19 % less or 190.4 l/min |
Carrier
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Maximum travel speed | 4.9 km/h and 4.2 km/h | 14 % more or 0.7 km/h |
Track shoes number per side | 52 and 47 | 10 % more or 5 |
Booms/sections features 1
Maximum excavation depth | 8490 mm and 7015 mm | 17 % more or 1475 mm |
Maximum radius along ground level | 12800 mm and 11865 mm | 7 % more or 935 mm |
Maximum loading height | 7960 mm and 7565 mm | 5 % more or 395 mm |
Maximum vertical wall digging depth | 7510 mm and 4930 mm | 34 % more or 2580 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3515 mm and 3280 mm |
Rear platform swing radius | 4300 mm and 3900 mm |
Caterpillar track length on ground level | 4500 mm and 4600 mm |
Operation
Fuel Capacity | 880 l. and 880 l. |
Working weight | 76245 kg and 58300 kg |
Motor
Manufacturer | Komatsu and Komatsu |
Model | SAA6D140E-2 and SAA6D140E-5 |
Power measured at | 1800 rev / min and 1800 rev / min |
Displacement | 15.2 l. and 15.2 l. |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator), Exhaust gas recirculation system with cooling |
Cylinders number | 6 and 6 |
Carrier
Support rollers number on either side | 3 and 3 |
Track width | 3500 mm and 2590 mm |
Shoe dimensions | 610 mm and 900 mm |
Booms/sections features 1
Unit load-transfer height | 4705 mm and 4300 mm |
Unit load-transfer length | 12870 mm and 12910 mm |
Maximum cut height | 11510 mm and 11880 mm |
Images
Sizes
2. Width to outside of caterpillar track | 4110 mm | 2. Width to outside of caterpillar track | 3490 mm |
4. Caterpillar track length on ground level | 4500 mm | 4. Caterpillar track length on ground level | 4600 mm |
5. Clearance | 840 mm | 5. Clearance | 780 mm |
7. Height to cab upper part | 3515 mm | 7. Height to cab upper part | 3280 mm |
8. Rear platform swing radius | 4300 mm | 8. Rear platform swing radius | 3900 mm |
15. Counterweight ground clearance | 1555 mm | 15. Counterweight ground clearance | 1365 mm |
Carrier
6. Track width | 3500 mm | 6. Track width | 2590 mm |
14. Shoe dimensions | 610 mm | 14. Shoe dimensions | 900 mm |
Booms/sections features 1
11. Maximum radius along ground level | 11865 mm | 11. Maximum radius along ground level | 13555 mm |
13. Maximum excavation depth | 7015 mm | 13. Maximum excavation depth | 9275 mm |
12. Maximum vertical wall digging depth | 4930 mm | 12. Maximum vertical wall digging depth | 8375 mm |
1. Unit load-transfer length | 12870 mm | 1. Unit load-transfer length | 12535 mm |
3. Unit load-transfer height | 4705 mm | 3. Unit load-transfer height | 5235 mm |
9. Maximum cut height | 11510 mm | 9. Maximum cut height | 12560 mm |
10. Maximum loading height | 7565 mm | 10. Maximum loading height | 8600 mm |