- Home/
- Comparison/
- Hydraulic Shovel/
- Link-Belt 225 Spin Ace vs. Kato HD1250VII
Link-Belt 225 Spin Ace vs. Kato HD1250VII
11 reasons to buy Link-Belt 225 Spin Ace:
Swing device
Rotation speed | 11 rev / min and 10 rev / min | 9 % more or 1 rev |
Sizes
Width to outside of caterpillar track | 3190 mm and 2600 mm | 18 % more or 590 mm |
Operation
Hydraulic system overflow valve pressure | 34266.9 kPa and 32819 kPa | 4 % more or 1447.9 kPa |
Hydraulic pump flow rate | 380.1 l/min and 582 l/min | 35 % less or 201.9 l/min |
Generator current strength | 50 amperes and 30 amperes | 40 % more or 20 amperes |
Motor
Torque measured at | 1600 rev / min and 1200 rev / min | 25 % more or 400 rev |
Power measured at | 1950 rev / min and 1700 rev / min | 13 % more or 250 rev |
Carrier
Specific ground pressure | 36 kPa and 59.8 kPa | 40 % less or 23.8 kPa |
Track shoes number per side | 49 and 47 | 4 % more or 2 |
Booms/sections features 2
Maximum loading height | 8020 mm and 7290 mm | 9 % more or 730 mm |
Booms/sections features 1
Maximum loading height | 7630 mm and 7110 mm | 7 % more or 520 mm |
14 reasons to buy Kato HD1250VII:
Sizes
Clearance | 480 mm and 460 mm | 4 % more or 20 mm |
Operation
Fuel Capacity | 510 l. and 265 l. | 48 % more or 245 l. |
Cooling system fluid volume | 52 l. and 23 l. | 56 % more or 29 l. |
Hydraulic system fluid volume | 480 l. and 205 l. | 57 % more or 275 l. |
Engine oil volume | 29 l. and 24 l. | 17 % more or 5 l. |
Motor
Maximum torque | 1010.1 Nm and 526.1 Nm | 48 % more or 484.0 Nm |
Displacement | 11.1 l. and 6.5 l. | 41 % more or 4.6 l. |
Carrier
Maximum travel speed | 5.5 km/h and 5 km/h | 9 % more or 0.5 km/h |
Booms/sections features 2
Maximum excavation depth | 7400 mm and 6700 mm | 9 % more or 700 mm |
Maximum radius along ground level | 10990 mm and 9730 mm | 11 % more or 1260 mm |
Maximum vertical wall digging depth | 6550 mm and 6060 mm | 7 % more or 490 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 5650 mm and 5480 mm | 3 % more or 170 mm |
Maximum excavation depth | 6710 mm and 6100 mm | 9 % more or 610 mm |
Maximum radius along ground level | 10390 mm and 9168.4 mm | 12 % more or 1221.6 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2970 mm and 3010 mm |
Rear platform swing radius | 1680 mm and 3460 mm |
Caterpillar track length on ground level | 3660 mm and 3710 mm |
Operation
Working weight | 23303.8 kg and 29500 kg |
Operating voltage | 24 V and 24 V |
Motor
Model | BB-6BG1T and 6D22T |
Cylinders number | 6 and 6 |
Aspiration | natural aspiration and turbocharging |
Manufacturer | Isuzu and Mitsubishi |
Carrier
Shoe dimensions | 800 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Rolling bearings number on either side | 8 and 8 |
Track width | 2390 mm and 2600 mm |
Booms/sections features 2
Maximum cut height | 10910 mm and 10330 mm |
Unit load-transfer height | 3240 mm and 3200 mm |
Unit load-transfer length | 8930 mm and 11150 mm |
Booms/sections features 1
Maximum cut height | 10520 mm and 10150 mm |
Images
Sizes
8. Rear platform swing radius | 1680 mm | 8. Rear platform swing radius | 3460 mm |
4. Caterpillar track length on ground level | 3660 mm | 4. Caterpillar track length on ground level | 3710 mm |
5. Clearance | 460 mm | 5. Clearance | 480 mm |
7. Height to cab upper part | 2970 mm | 7. Height to cab upper part | 3010 mm |
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 2600 mm |
Carrier
6. Track width | 2390 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 8930 mm | 1. Unit load-transfer length | 11150 mm |
3. Unit load-transfer height | 3240 mm | 3. Unit load-transfer height | 3200 mm |
9. Maximum cut height | 10910 mm | 9. Maximum cut height | 10590 mm |
10. Maximum loading height | 8020 mm | 10. Maximum loading height | 7550 mm |
11. Maximum radius along ground level | 9730 mm | 11. Maximum radius along ground level | 11870 mm |
12. Maximum vertical wall digging depth | 6060 mm | 12. Maximum vertical wall digging depth | 7560 mm |
13. Maximum excavation depth | 6700 mm | 13. Maximum excavation depth | 8380 mm |