- Home/
- Comparison/
- Hydraulic Shovel/
- New Holland E215E vs. Case CX160B
New Holland E215E vs. Case CX160B
15 reasons to buy New Holland E215E:
Sizes
Clearance | 482 mm and 440 mm | 9 % more or 42 mm |
Counterweight ground clearance | 1076 mm and 1020 mm | 5 % more or 56 mm |
Operation
Cooling system fluid volume | 24 l. and 15 l. | 37 % more or 9 l. |
Hydraulic system fluid volume | 270 l. and 165 l. | 39 % more or 105 l. |
Generator current strength | 70 amperes and 50 amperes | 29 % more or 20 amperes |
Motor
Displacement | 5.9 l. and 3 l. | 49 % more or 2.9 l. |
Maximum torque | 660 Nm and 390.5 Nm | 41 % more or 269.5 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 119.3 kW and 89.2 kW | 25 % more or 30.1 kW |
Carrier
Maximum travel speed | 6 km/h and 5.4 km/h | 10 % more or 0.6 km/h |
Booms/sections features 2
Maximum excavation depth | 6141 mm and 6060 mm | 1 % more or 81 mm |
Maximum radius along ground level | 9270 mm and 8870 mm | 4 % more or 400 mm |
Maximum loading height | 6661 mm and 5850 mm | 12 % more or 811 mm |
Maximum vertical wall digging depth | 5938 mm and 5080 mm | 14 % more or 858 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 5592 mm and 5220 mm | 7 % more or 372 mm |
8 reasons to buy Case CX160B:
Swing device
Rotation speed | 11.5 rev / min and 11 rev / min | 4 % more or 0.5 rev |
Operation
Fuel Capacity | 300 l. and 292 l. | 3 % more or 8 l. |
Hydraulic pump flow rate | 142 l/min and 420 l/min | 66 % less or 278 l/min |
Motor
Torque measured at | 1800 rev / min and 1400 rev / min | 22 % more or 400 rev |
Power measured at | 2200 rev / min and 2150 rev / min | 2 % more or 50 rev |
Carrier
Specific ground pressure | 41.4 kPa and 53 kPa | 22 % less or 11.6 kPa |
Booms/sections features 1
Maximum excavation depth | 6490 mm and 5821 mm | 10 % more or 669 mm |
Maximum loading height | 6690 mm and 6488 mm | 3 % more or 202 mm |
Neutral reasons:
Sizes
Width to outside of caterpillar track | 2590 mm and 2590 mm |
Height to cab upper part | 2984 mm and 2930 mm |
Rear platform swing radius | 2750 mm and 2450 mm |
Caterpillar track length on ground level | 3373 mm and 3190 mm |
Operation
Working weight | 21050 kg and 17100 kg |
Engine oil volume | 17 l. and 17 l. |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | Turbocharging with intercooler and turbocharging and cooling at the outlet |
Model | CNH - F4BE8604B and 4JJ1X, III Level III certified |
Carrier
Rolling bearings number on either side | 7 and 7 |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 2
Unit load-transfer length | 9490 mm and 8440 mm |
Maximum cut height | 9450 mm and 9240 mm |
Unit load-transfer height | 2984 mm and 2960 mm |
Booms/sections features 1
Maximum cut height | 9235 mm and 9290 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2590 mm | 2. Width to outside of caterpillar track | 2590 mm |
4. Caterpillar track length on ground level | 3373 mm | 4. Caterpillar track length on ground level | 3190 mm |
5. Clearance | 482 mm | 5. Clearance | 440 mm |
7. Height to cab upper part | 2984 mm | 7. Height to cab upper part | 2930 mm |
8. Rear platform swing radius | 2750 mm | 8. Rear platform swing radius | 2450 mm |
15. Counterweight ground clearance | 1076 mm | 15. Counterweight ground clearance | 1020 mm |
Carrier
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
11. Maximum radius along ground level | 9765 mm | 11. Maximum radius along ground level | 9220 mm |
3. Unit load-transfer height | 2984 mm | 3. Unit load-transfer height | 3130 mm |
13. Maximum excavation depth | 6681 mm | 13. Maximum excavation depth | 6490 mm |
9. Maximum cut height | 9579 mm | 9. Maximum cut height | 9290 mm |
10. Maximum loading height | 6935 mm | 10. Maximum loading height | 6690 mm |
12. Maximum vertical wall digging depth | 6505 mm | 12. Maximum vertical wall digging depth | 5220 mm |
1. Unit load-transfer length | 9490 mm | 1. Unit load-transfer length | 8440 mm |