- Home/
- Comparison/
- Hydraulic Shovel/
- Terex TXC225LC-1 vs. Kato HD800VII
Terex TXC225LC-1 vs. Kato HD800VII
13 reasons to buy Terex TXC225LC-1:
Swing device
Rotation speed | 12.3 rev / min and 10.5 rev / min | 15 % more or 1.8 rev |
Sizes
Counterweight ground clearance | 1105 mm and 1085 mm | 2 % more or 20 mm |
Operation
Hydraulic pump flow rate | 430 l/min and 462 l/min | 7 % less or 32 l/min |
Fuel Capacity | 350 l. and 320 l. | 9 % more or 30 l. |
Cooling system fluid volume | 42 l. and 25 l. | 40 % more or 17 l. |
Motor
Maximum torque | 603.3 Nm and 515.2 Nm | 15 % more or 88.1 Nm |
Carrier
Rolling bearings number on either side | 9 and 7 | 22 % more or 2 |
Specific ground pressure | 44.1 kPa and 44.6 kPa | 1 % less or 0.5 kPa |
Booms/sections features 2
Maximum loading height | 6885 mm and 6700 mm | 3 % more or 185 mm |
Booms/sections features 1
Maximum excavation depth | 6630 mm and 6230 mm | 6 % more or 400 mm |
Maximum radius along ground level | 9735 mm and 9520 mm | 2 % more or 215 mm |
Maximum loading height | 6810 mm and 6520 mm | 4 % more or 290 mm |
Maximum vertical wall digging depth | 6045 mm and 5740 mm | 5 % more or 305 mm |
13 reasons to buy Kato HD800VII:
Operation
Hydraulic system overflow valve pressure | 32819 kPa and 32336.4 kPa | 1 % more or 482.6 kPa |
Hydraulic system fluid volume | 290 l. and 220 l. | 24 % more or 70 l. |
Engine oil volume | 20 l. and 19 l. | 5 % more or 1 l. |
Motor
Power measured at | 2100 rev / min and 1950 rev / min | 7 % more or 150 rev |
Displacement | 6.6 l. and 5.8 l. | 12 % more or 0.8 l. |
Carrier
Track shoes number per side | 50 and 49 | 2 % more or 1 |
Booms/sections features 3
Maximum vertical wall digging depth | 7240 mm and 6560 mm | 9 % more or 680 mm |
Maximum excavation depth | 7710 mm and 7230 mm | 6 % more or 480 mm |
Maximum radius along ground level | 10870 mm and 10230 mm | 6 % more or 640 mm |
Maximum loading height | 7070 mm and 7020 mm | 1 % more or 50 mm |
Booms/sections features 2
Maximum vertical wall digging depth | 6240 mm and 6035 mm | 3 % more or 205 mm |
Maximum excavation depth | 6720 mm and 6125 mm | 9 % more or 595 mm |
Maximum radius along ground level | 9960 mm and 9400 mm | 6 % more or 560 mm |
Neutral reasons:
Sizes
Width to outside of caterpillar track | 2990 mm and 2990 mm |
Clearance | 480 mm and 480 mm |
Rear platform swing radius | 2750 mm and 3040 mm |
Caterpillar track length on ground level | 3645 mm and 3340 mm |
Shovel
Maximum bucket volume | 1.3 m3 and 1.3 m3 |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 21500.3 kg and 19800 kg |
Boom reach drive mechanism fluid volume | 5 l. and 5 l. |
Motor
Manufacturer | Daewoo and Mitsubishi |
Model | DE58TIS and 6D14-T |
Torque measured at | 1400 rev / min and 1400 rev / min |
Aspiration | turbocharging, with subsequent cooling of charging air by oncoming air flow and turbocharging |
Cylinders number | 6 and 6 |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Track width | 2390 mm and 2390 mm |
Booms/sections features 3
Maximum cut height | 9870 mm and 10160 mm |
Booms/sections features 2
Maximum cut height | 9825 mm and 9800 mm |
Booms/sections features 1
Maximum cut height | 9660 mm and 9610 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2990 mm | 2. Width to outside of caterpillar track | 2990 mm |
4. Caterpillar track length on ground level | 3645 mm | 4. Caterpillar track length on ground level | 3340 mm |
5. Clearance | 480 mm | 5. Clearance | 480 mm |
8. Rear platform swing radius | 2750 mm | 8. Rear platform swing radius | 3040 mm |
15. Counterweight ground clearance | 1105 mm | 15. Counterweight ground clearance | 1085 mm |
Carrier
6. Track width | 2390 mm | 6. Track width | 2390 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 6560 mm | 12. Maximum vertical wall digging depth | 7240 mm |
13. Maximum excavation depth | 7230 mm | 13. Maximum excavation depth | 7710 mm |
9. Maximum cut height | 9660 mm | 9. Maximum cut height | 10160 mm |
10. Maximum loading height | 6810 mm | 10. Maximum loading height | 7070 mm |
11. Maximum radius along ground level | 9735 mm | 11. Maximum radius along ground level | 10870 mm |
1. Unit load-transfer length | 9510 mm | 1. Unit load-transfer length | 9780 mm |
3. Unit load-transfer height | 3030 mm | 3. Unit load-transfer height | 2940 mm |