- Home/
- Comparison/
- Hydraulic Shovel/
- Terex TXC340LC-1 vs. Hyundai R290LC-7
Terex TXC340LC-1 vs. Hyundai R290LC-7
18 reasons to buy Terex TXC340LC-1:
Shovel
Bucket initial volume | 1.5 m3 and 1.3 m3 | 13 % more or 0.2 m3 |
Operation
Hydraulic system fluid volume | 460 l. and 320 l. | 30 % more or 140 l. |
Engine oil volume | 28 l. and 23.7 l. | 15 % more or 4.3 l. |
Fuel Capacity | 550 l. and 480 l. | 13 % more or 70 l. |
Cooling system fluid volume | 58 l. and 50 l. | 14 % more or 8 l. |
Motor
Full power | 186.4 kW and 158.8 kW | 15 % more or 27.6 kW |
Effective power | 184.2 kW and 146.9 kW | 20 % more or 37.3 kW |
Displacement | 11.1 l. and 5.9 l. | 47 % more or 5.2 l. |
Maximum torque | 1058.9 Nm and 928.7 Nm | 12 % more or 130.2 Nm |
Carrier
Track shoes number per side | 51 and 48 | 6 % more or 3 |
Booms/sections features 2
Maximum radius along ground level | 11810 mm and 10080 mm | 15 % more or 1730 mm |
Maximum excavation depth | 8480 mm and 6840 mm | 19 % more or 1640 mm |
Maximum loading height | 7640 mm and 7030 mm | 8 % more or 610 mm |
Maximum vertical wall digging depth | 6990 mm and 5850 mm | 16 % more or 1140 mm |
Booms/sections features 1
Maximum excavation depth | 7670 mm and 6440 mm | 16 % more or 1230 mm |
Maximum radius along ground level | 11040 mm and 9820 mm | 11 % more or 1220 mm |
Maximum loading height | 7270 mm and 6940 mm | 5 % more or 330 mm |
Maximum vertical wall digging depth | 6200 mm and 6000 mm | 3 % more or 200 mm |
8 reasons to buy Hyundai R290LC-7:
Swing device
Rotation speed | 11 rev / min and 8.9 rev / min | 19 % more or 2.1 rev |
Sizes
Counterweight ground clearance | 1190 mm and 1175 mm | 1 % more or 15 mm |
Shovel
Maximum bucket volume | 1.9 m3 and 1.8 m3 | 5 % more or 0.1 m3 |
Operation
Boom reach drive mechanism fluid volume | 11 l. and 6 l. | 45 % more or 5 l. |
Hydraulic pump flow rate | 520 l/min and 532 l/min | 2 % less or 12 l/min |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Carrier
Specific ground pressure | 55 kPa and 63.4 kPa | 13 % less or 8.4 kPa |
Maximum travel speed | 5.2 km/h and 4.6 km/h | 12 % more or 0.6 km/h |
Neutral reasons:
Sizes
Rear platform swing radius | 3200 mm and 3200 mm |
Caterpillar track length on ground level | 4010 mm and 4030 mm |
Width to outside of caterpillar track | 3200 mm and 3200 mm |
Height to cab upper part | 3065 mm and 3010 mm |
Clearance | 500 mm and 500 mm |
Operation
Hydraulic system overflow valve pressure | 32336.4 kPa and 32336.4 kPa |
Operating voltage | 24 V and 24 V |
Working weight | 34700 kg and 29302.1 kg |
Motor
Model | DE12TIS and QSB5.9-C |
Power measured at | 1900 rev / min and 1900 rev / min |
Manufacturer | Daewoo and Cummins |
Aspiration | turbocharging and turbocharging |
Cylinders number | 6 and 6 |
Carrier
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Rolling bearings number on either side | 9 and 9 |
Track width | 2600 mm and 2600 mm |
Booms/sections features 2
Maximum cut height | 10820 mm and 10110 mm |
Booms/sections features 1
Unit load-transfer height | 3365 mm and 3590 mm |
Unit load-transfer length | 10620 mm and 10700 mm |
Maximum cut height | 10440 mm and 10070 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3200 mm | 2. Width to outside of caterpillar track | 3200 mm |
4. Caterpillar track length on ground level | 4010 mm | 4. Caterpillar track length on ground level | 4030 mm |
5. Clearance | 500 mm | 5. Clearance | 500 mm |
7. Height to cab upper part | 3065 mm | 7. Height to cab upper part | 3010 mm |
8. Rear platform swing radius | 3200 mm | 8. Rear platform swing radius | 3200 mm |
15. Counterweight ground clearance | 1175 mm | 15. Counterweight ground clearance | 1190 mm |
Carrier
6. Track width | 2600 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 8480 mm | 13. Maximum excavation depth | 7500 mm |
1. Unit load-transfer length | 10620 mm | 1. Unit load-transfer length | 10630 mm |
3. Unit load-transfer height | 3365 mm | 3. Unit load-transfer height | 3500 mm |
9. Maximum cut height | 10820 mm | 9. Maximum cut height | 10360 mm |
10. Maximum loading height | 7640 mm | 10. Maximum loading height | 7310 mm |
11. Maximum radius along ground level | 11810 mm | 11. Maximum radius along ground level | 11220 mm |
12. Maximum vertical wall digging depth | 6990 mm | 12. Maximum vertical wall digging depth | 6410 mm |