vs.

      Caterpillar IT38H vs. JCB 456HT

      11 reasons to buy Caterpillar IT38H:

      Sizes

      Fork tines length 1524 mm and 1220 mm 20 % more or 304 mm

      Shovel

      Breakout power 126 kN and 150 kN 16 % less or 24 kN

      Operation

      Turn radius 6068 mm and 6630 mm 8 % less or 562 mm
      Static bucket tipping load 10849 kg and 14493 kg 25 % less or 3644 kg
      Static tipping forks load 8866 kg and 11281 kg 21 % less or 2415 kg
      Transmission fluid volume 43 l. and 34 l. 21 % more or 9 l.
      Rear differential fluid volume 53 l. and 51 l. 4 % more or 2 l.

      Hydraulic system

      Lifting time 5 sec and 5.8 sec 14 % less or 0.8 sec
      Lowering time 2.7 sec and 4.1 sec 34 % less or 1.4 sec

      Gear box

      Maximum reverse gear 25.5 km/h and 24.4 km/h 4 % more or 1.1 km/h
      Maximum forward speed 43.2 km/h and 37.4 km/h 13 % more or 5.8 km/h

      20 reasons to buy JCB 456HT:

      Sizes

      Unloading ground clearance at maximum lifting 3069 mm and 2805 mm 9 % more or 264 mm
      Clearance 470 mm and 397 mm 16 % more or 73 mm
      Radius at maximum height and unloading 1220 mm and 1152 mm 6 % more or 68 mm
      Maximum lifting height 4194 mm and 3545 mm 15 % more or 649 mm

      Shovel

      Bucket capacity with top 3.3 m3 and 3 m3 9 % more or 0.3 m3
      Brimmed bucket capacity 2.6 m3 and 2.3 m3 12 % more or 0.3 m3

      Operation

      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes
      Fuel Capacity 320 l. and 247 l. 23 % more or 73 l.
      Cooling system fluid volume 40 l. and 36 l. 10 % more or 4 l.
      Engine oil volume 18.9 l. and 17.4 l. 8 % more or 1.5 l.
      Front differential fluid volume 69 l. and 57 l. 17 % more or 12 l.
      Hydraulic system fluid volume 215 l. and 89 l. 59 % more or 126 l.

      Motor

      Full power 160.3 kW and 147 kW 8 % more or 13.3 kW
      Effective power 154.4 kW and 133 kW 14 % more or 21.4 kW
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Maximum torque 915.2 Nm and 840.6 Nm 8 % more or 74.6 Nm
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Displacement 8.3 l. and 6.6 l. 20 % more or 1.7 l.

      Hydraulic system

      Pump bandwidth 326 l/min and 295 l/min 10 % more or 31 l/min
      Unloading time 1.2 sec and 2 sec 40 % less or 0.8 sec

      Neutral reasons:

      Sizes

      Between tyres width 2674 mm and 2702 mm
      Hinge axis maximum height 3933 mm and 4304 mm
      Height to cab upper part 3356 mm and 3370 mm
      Length with bucket on ground level 7543 mm and 8520 mm
      Wheelbase 3020 mm and 3300 mm

      Operation

      Rear axle oscillating 12 degrees and 25 degrees
      Operating voltage 24 V and 24 V
      Tyre size 20.5-R25 and Michelin 23.5R25 XHA L3
      Working weight 16004 kg and 20143 kg

      Motor

      Model 6.6 Acert and QSC 8.3

      Hydraulic system

      Type of pump piston pump and twin variable displacement piston pumps
      Overflow valve pressure 6894.8 kPa and 24993.5 kPa

      Gear box

      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      7. Unloading ground clearance at maximum lifting 2805 mm 7. Unloading ground clearance at maximum lifting 3069 mm
      9. Fork tines length 1524 mm 9. Fork tines length 1220 mm
      11. Maximum lifting height 3545 mm 11. Maximum lifting height 4194 mm
      1. Length with bucket on ground level 7543 mm 1. Length with bucket on ground level 8520 mm
      2. Between tyres width 2674 mm 2. Between tyres width 2702 mm
      3. Height to cab upper part 3356 mm 3. Height to cab upper part 3370 mm
      4. Wheelbase 3020 mm 4. Wheelbase 3300 mm
      5. Clearance 397 mm 5. Clearance 470 mm
      6. Hinge axis maximum height 3933 mm 6. Hinge axis maximum height 4304 mm