- Home/
- Comparison/
- Attached Equipment/
- Caterpillar IT62H vs. John Deere 244J
Caterpillar IT62H vs. John Deere 244J
21 reasons to buy Caterpillar IT62H:
Sizes
Clearance | 412 mm and 295 mm | 28 % more or 117 mm |
Unloading ground clearance at maximum lifting | 2785 mm and 2550 mm | 8 % more or 235 mm |
Radius at maximum height and unloading | 1227 mm and 1170 mm | 5 % more or 57 mm |
Fork tines length | 1524 mm and 1200 mm | 21 % more or 324 mm |
Maximum lifting height | 3817 mm and 3039 mm | 20 % more or 778 mm |
Operation
Fuel Capacity | 314 l. and 80 l. | 75 % more or 234 l. |
Cooling system fluid volume | 42 l. and 10 l. | 76 % more or 32 l. |
Engine oil volume | 30 l. and 8.5 l. | 72 % more or 21.5 l. |
Front differential fluid volume | 36 l. and 4 l. | 89 % more or 32 l. |
Rear differential fluid volume | 36 l. and 4.1 l. | 89 % more or 31.9 l. |
Hydraulic system fluid volume | 110 l. and 60 l. | 45 % more or 50 l. |
Generator current strength | 80 amperes and 65 amperes | 19 % more or 15 amperes |
Motor
Displacement | 7.2 l. and 2.4 l. | 67 % more or 4.8 l. |
Effective power | 158 kW and 47.7 kW | 70 % more or 110.3 kW |
Maximum torque | 907 Nm and 221 Nm | 76 % more or 686 Nm |
Hydraulic system
Pump bandwidth | 270 l/min and 64.4 l/min | 76 % more or 205.6 l/min |
Lowering time | 2.6 sec and 4 sec | 35 % less or 1.4 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 38 km/h and 30 km/h | 21 % more or 8 km/h |
Maximum reverse gear | 40 km/h and 30 km/h | 25 % more or 10 km/h |
6 reasons to buy John Deere 244J:
Shovel
Breakout power | 48 kN and 159.1 kN | 70 % less or 111.1 kN |
Operation
Static tipping forks load | 2905 kg and 9373 kg | 69 % less or 6468 kg |
Turn radius | 3505 mm and 6727 mm | 48 % less or 3222 mm |
Static bucket tipping load | 3836 kg and 13245 kg | 71 % less or 9409 kg |
Hydraulic system
Lifting time | 4.9 sec and 6 sec | 18 % less or 1.1 sec |
Unloading time | 1.4 sec and 2.1 sec | 33 % less or 0.7 sec |
Neutral reasons:
Sizes
Height to cab upper part | 3452 mm and 2725 mm |
Wheelbase | 3350 mm and 2150 mm |
Hinge axis maximum height | 4123 mm and 3211 mm |
Length with bucket on ground level | 8498 mm and 5295 mm |
Length with forks on ground level | 9116 mm and 5805 mm |
Between tyres width | 2784 mm and 1848 mm |
Operation
Tyre size | 23.5R25 and 365/70R18 |
Working weight | 19397 kg and 5240 kg |
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 13 degrees and 20 degrees |
Motor
Manufacturer | Caterpillar and John Deere |
Model | C7 ACERT and 4024T |
Hydraulic system
Type of pump | piston pump and fixed-displacement gear |
Gear box
Transmission type | powershift transmission and hydrostatic |
Images
Sizes
1. Length with bucket on ground level | 8498 mm | 1. Length with bucket on ground level | 5295 mm |
2. Between tyres width | 2784 mm | 2. Between tyres width | 1848 mm |
3. Height to cab upper part | 3452 mm | 3. Height to cab upper part | 2725 mm |
4. Wheelbase | 3350 mm | 4. Wheelbase | 2150 mm |
5. Clearance | 412 mm | 5. Clearance | 295 mm |
6. Hinge axis maximum height | 4123 mm | 6. Hinge axis maximum height | 3211 mm |
7. Unloading ground clearance at maximum lifting | 2785 mm | 7. Unloading ground clearance at maximum lifting | 2550 mm |
9. Fork tines length | 1524 mm | 9. Fork tines length | 1200 mm |
10. Length with forks on ground level | 9116 mm | 10. Length with forks on ground level | 5805 mm |
11. Maximum lifting height | 3817 mm | 11. Maximum lifting height | 3039 mm |