- Home/
- Comparison/
- Attached Equipment/
- JCB 406 vs. JCB 426ZX
JCB 406 vs. JCB 426ZX
6 reasons to buy JCB 406:
Shovel
Breakout power | 41.9 kN and 144.9 kN | 71 % less or 103.0 kN |
Operation
Turn radius | 2720 mm and 5791.2 mm | 53 % less or 3071.2 mm |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Static bucket tipping load | 4290.1 kg and 10502 kg | 59 % less or 6211.9 kg |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Torque measured at | 1700 rev / min and 1400 rev / min | 18 % more or 300 rev |
22 reasons to buy JCB 426ZX:
Sizes
Unloading ground clearance at maximum lifting | 2962 mm and 2489 mm | 16 % more or 473 mm |
Maximum lifting height | 3695 mm and 3012 mm | 18 % more or 683 mm |
Radius at maximum height and unloading | 946 mm and 764 mm | 19 % more or 182 mm |
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Clearance | 442 mm and 330 mm | 25 % more or 112 mm |
Operation
Hydraulic system fluid volume | 208.2 l. and 70 l. | 66 % more or 138.2 l. |
Fuel Capacity | 230.9 l. and 79.5 l. | 66 % more or 151.4 l. |
Engine oil volume | 14 l. and 11.7 l. | 16 % more or 2.3 l. |
Front differential fluid volume | 39 l. and 3.8 l. | 90 % more or 35.2 l. |
Rear differential fluid volume | 37.1 l. and 3.8 l. | 90 % more or 33.3 l. |
Motor
Full power | 123 kW and 44 kW | 64 % more or 79 kW |
Effective power | 113.3 kW and 41.8 kW | 63 % more or 71.5 kW |
Maximum torque | 732.1 Nm and 189.8 Nm | 74 % more or 542.3 Nm |
Displacement | 6.7 l. and 3.1 l. | 54 % more or 3.6 l. |
Hydraulic system
Lifting time | 4.4 sec and 4.9 sec | 10 % less or 0.5 sec |
Lowering time | 2.7 sec and 3.1 sec | 13 % less or 0.4 sec |
Unloading time | 1.3 sec and 3.5 sec | 63 % less or 2.2 sec |
Pump bandwidth | 264 l/min and 60 l/min | 77 % more or 204 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 37.8 km/h and 20.1 km/h | 47 % more or 17.7 km/h |
Maximum reverse gear | 25.1 km/h and 20.1 km/h | 20 % more or 5.0 km/h |
Neutral reasons:
Sizes
Between tyres width | 1761 mm and 2482 mm |
Height to cab upper part | 2500 mm and 3335 mm |
Wheelbase | 2100 mm and 3000 mm |
Hinge axis maximum height | 3131 mm and 3906 mm |
Length with bucket on ground level | 5133 mm and 6831 mm |
Operation
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 10 degrees and 21 degrees |
Tyre size | 12.5/80 R18 SGL and 20.5R25 XHA (L3) |
Working weight | 4933.7 kg and 13229.9 kg |
Motor
Model | F4L2011 and QB6.7 |
Aspiration | natural aspiration and Turbocharger with wastegate |
Hydraulic system
Type of pump | gear type pump and twin variable displacement piston pumps |
Overflow valve pressure | 22994 kPa and 24993.5 kPa |
Gear box
Transmission type | Hydro-Static Transmission and smooth power shifting ZF 4WG 160 |
Images
Sizes
1. Length with bucket on ground level | 5133 mm | 1. Length with bucket on ground level | 6831 mm |
2. Between tyres width | 1761 mm | 2. Between tyres width | 2482 mm |
3. Height to cab upper part | 2500 mm | 3. Height to cab upper part | 3335 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 330 mm | 5. Clearance | 442 mm |
6. Hinge axis maximum height | 3131 mm | 6. Hinge axis maximum height | 3906 mm |
7. Unloading ground clearance at maximum lifting | 2489 mm | 7. Unloading ground clearance at maximum lifting | 2962 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3012 mm | 11. Maximum lifting height | 3695 mm |