- Home/
- Comparison/
- Attached Equipment/
- JCB 406 vs. JCB 456 Waste master
JCB 406 vs. JCB 456 Waste master
8 reasons to buy JCB 406:
Shovel
Breakout power | 41.9 kN and 145 kN | 71 % less or 103.1 kN |
Operation
Turn radius | 2720 mm and 6630 mm | 59 % less or 3910 mm |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Static bucket tipping load | 4290.1 kg and 9688 kg | 56 % less or 5397.9 kg |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Torque measured at | 1700 rev / min and 1400 rev / min | 18 % more or 300 rev |
Hydraulic system
Lifting time | 4.9 sec and 5.8 sec | 16 % less or 0.9 sec |
Lowering time | 3.1 sec and 4.1 sec | 24 % less or 1.0 sec |
18 reasons to buy JCB 456 Waste master:
Sizes
Clearance | 470 mm and 330 mm | 30 % more or 140 mm |
Unloading ground clearance at maximum lifting | 4030 mm and 2489 mm | 38 % more or 1541 mm |
Radius at maximum height and unloading | 1320 mm and 764 mm | 42 % more or 556 mm |
Operation
Fuel Capacity | 370 l. and 79.5 l. | 79 % more or 290.5 l. |
Engine oil volume | 18.9 l. and 11.7 l. | 38 % more or 7.2 l. |
Front differential fluid volume | 69 l. and 3.8 l. | 94 % more or 65.2 l. |
Rear differential fluid volume | 51 l. and 3.8 l. | 93 % more or 47.2 l. |
Hydraulic system fluid volume | 215 l. and 70 l. | 67 % more or 145 l. |
Motor
Displacement | 8.3 l. and 3.1 l. | 63 % more or 5.2 l. |
Full power | 161.1 kW and 44 kW | 73 % more or 117.1 kW |
Effective power | 146.9 kW and 41.8 kW | 72 % more or 105.1 kW |
Maximum torque | 902 Nm and 189.8 Nm | 79 % more or 712.2 Nm |
Hydraulic system
Pump bandwidth | 410 l/min and 60 l/min | 85 % more or 350 l/min |
Unloading time | 1.2 sec and 3.5 sec | 66 % less or 2.3 sec |
Gear box
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 37.4 km/h and 20.1 km/h | 46 % more or 17.3 km/h |
Maximum reverse gear | 24.4 km/h and 20.1 km/h | 18 % more or 4.3 km/h |
Forward gears number | 4 and 2 | 50 % more or 2 |
Neutral reasons:
Sizes
Wheelbase | 2100 mm and 3300 mm |
Length with bucket on ground level | 5133 mm and 9470 mm |
Hinge axis maximum height | 3131 mm and 5310 mm |
Between tyres width | 1761 mm and 2702 mm |
Height to cab upper part | 2500 mm and 3410 mm |
Operation
Working weight | 4933.7 kg and 21627 kg |
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 10 degrees and 25 degrees |
Tyre size | 12.5/80 R18 SGL and Michelin 23.5R25 XHA L3 |
Motor
Aspiration | natural aspiration and turbocharging |
Manufacturer | Deutz and Cummins |
Model | F4L2011 and 6CT 8.3C |
Hydraulic system
Type of pump | gear type pump and twin variable displacement piston pumps |
Overflow valve pressure | 22994 kPa and 24993.5 kPa |
Gear box
Transmission type | Hydro-Static Transmission and smooth power shifting |
Images
Sizes
1. Length with bucket on ground level | 5133 mm | 1. Length with bucket on ground level | 9470 mm |
2. Between tyres width | 1761 mm | 2. Between tyres width | 2702 mm |
3. Height to cab upper part | 2500 mm | 3. Height to cab upper part | 3410 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 3300 mm |
5. Clearance | 330 mm | 5. Clearance | 470 mm |
6. Hinge axis maximum height | 3131 mm | 6. Hinge axis maximum height | 5310 mm |
7. Unloading ground clearance at maximum lifting | 2489 mm | 7. Unloading ground clearance at maximum lifting | 4030 mm |