- Home/
- Comparison/
- Attached Equipment/
- JCB 411ZX Zet vs. JCB 426HT High-Lift
JCB 411ZX Zet vs. JCB 426HT High-Lift
4 reasons to buy JCB 411ZX Zet:
Operation
Static bucket tipping load | 5200 kg and 8802.9 kg | 41 % less or 3602.9 kg |
Static tipping forks load | 3550 kg and 6586.6 kg | 46 % less or 3036.6 kg |
Transmission fluid volume | 130 l. and 26.5 l. | 80 % more or 103.5 l. |
Turn radius | 4550 mm and 6282 mm | 28 % less or 1732 mm |
26 reasons to buy JCB 426HT High-Lift:
Sizes
Unloading ground clearance at maximum lifting | 3261 mm and 2775 mm | 15 % more or 486 mm |
Clearance | 442 mm and 430 mm | 3 % more or 12 mm |
Radius at maximum height and unloading | 1243 mm and 705 mm | 43 % more or 538 mm |
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Maximum lifting height | 4148 mm and 3328 mm | 20 % more or 820 mm |
Shovel
Brimmed bucket capacity | 1.6 m3 and 1 m3 | 37 % more or 0.6 m3 |
Bucket capacity with top | 1.9 m3 and 1.2 m3 | 37 % more or 0.7 m3 |
Operation
Fuel Capacity | 230.9 l. and 110 l. | 52 % more or 120.9 l. |
Cooling system fluid volume | 34.1 l. and 18 l. | 47 % more or 16.1 l. |
Engine oil volume | 14 l. and 10.7 l. | 24 % more or 3.3 l. |
Front differential fluid volume | 39 l. and 16 l. | 59 % more or 23 l. |
Rear differential fluid volume | 37.1 l. and 18 l. | 51 % more or 19.1 l. |
Hydraulic system fluid volume | 208.2 l. and 130 l. | 38 % more or 78.2 l. |
Generator current strength | 70 amperes and 65 amperes | 7 % more or 5 amperes |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 732.1 Nm and 302.3 Nm | 59 % more or 429.8 Nm |
Displacement | 6.7 l. and 4.4 l. | 34 % more or 2.3 l. |
Full power | 123 kW and 55.9 kW | 55 % more or 67.1 kW |
Effective power | 113.3 kW and 50 kW | 56 % more or 63.3 kW |
Hydraulic system
Pump bandwidth | 264 l/min and 90 l/min | 66 % more or 174 l/min |
Lifting time | 4.4 sec and 4.9 sec | 10 % less or 0.5 sec |
Lowering time | 2.7 sec and 3.1 sec | 13 % less or 0.4 sec |
Gear box
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 37.8 km/h and 20 km/h | 47 % more or 17.8 km/h |
Maximum reverse gear | 25.1 km/h and 20 km/h | 20 % more or 5.1 km/h |
Forward gears number | 4 and 2 | 50 % more or 2 |
Neutral reasons:
Sizes
Height to cab upper part | 2870 mm and 3335 mm |
Length with bucket on ground level | 5530 mm and 7244 mm |
Wheelbase | 2250 mm and 3000 mm |
Between tyres width | 2250 mm and 2597 mm |
Hinge axis maximum height | 3516 mm and 4336 mm |
Operation
Rear axle oscillating | 9 degrees and 21 degrees |
Tyre size | 405/80 R25 and 20.5R25 XHA(L3) |
Working weight | 7620 kg and 13351.9 kg |
Operating voltage | 12 V and 24 V |
Motor
Torque measured at | 1400 rev / min and 1400 rev / min |
Aspiration | natural aspiration and Turbocharger with wastegate |
Model | 1104C-44 and QB6.7 |
Hydraulic system
Type of pump | gear type pump and twin variable displacement piston pumps |
Overflow valve pressure | 24497.1 kPa and 24993.5 kPa |
Gear box
Transmission type | Hydro-Static Transmission and smooth power shifting |
Images
Sizes
11. Maximum lifting height | 3328 mm | 11. Maximum lifting height | 4148 mm |
1. Length with bucket on ground level | 5530 mm | 1. Length with bucket on ground level | 7244 mm |
2. Between tyres width | 2250 mm | 2. Between tyres width | 2597 mm |
3. Height to cab upper part | 2870 mm | 3. Height to cab upper part | 3335 mm |
4. Wheelbase | 2250 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 430 mm | 5. Clearance | 442 mm |
6. Hinge axis maximum height | 3516 mm | 6. Hinge axis maximum height | 4336 mm |
7. Unloading ground clearance at maximum lifting | 2775 mm | 7. Unloading ground clearance at maximum lifting | 3261 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1220 mm |