vs.

      JCB 411ZX vs. JCB 456HT Ultrahigh Lift

      7 reasons to buy JCB 411ZX:

      Operation

      Static tipping forks load 4170 kg and 8314 kg 50 % less or 4144 kg
      Static bucket tipping load 3089 kg and 9493 kg 67 % less or 6404 kg
      Transmission fluid volume 85 l. and 34 l. 60 % more or 51 l.
      Turn radius 3605.8 mm and 7121 mm 49 % less or 3515.2 mm
      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes

      Hydraulic system

      Lifting time 5 sec and 5.8 sec 14 % less or 0.8 sec
      Lowering time 3.2 sec and 4.1 sec 22 % less or 0.9 sec

      21 reasons to buy JCB 456HT Ultrahigh Lift:

      Sizes

      Clearance 470 mm and 410 mm 13 % more or 60 mm
      Unloading ground clearance at maximum lifting 4034 mm and 2512 mm 38 % more or 1522 mm
      Radius at maximum height and unloading 1277 mm and 634 mm 50 % more or 643 mm
      Fork tines length 1220 mm and 1200 mm 2 % more or 20 mm
      Maximum lifting height 5160 mm and 3021 mm 41 % more or 2139 mm

      Operation

      Fuel Capacity 320 l. and 100 l. 69 % more or 220 l.
      Cooling system fluid volume 40 l. and 15.5 l. 61 % more or 24.5 l.
      Engine oil volume 18.9 l. and 9.4 l. 50 % more or 9.5 l.
      Front differential fluid volume 69 l. and 9.5 l. 86 % more or 59.5 l.
      Rear differential fluid volume 51 l. and 10.5 l. 79 % more or 40.5 l.
      Hydraulic system fluid volume 215 l. and 85.2 l. 60 % more or 129.8 l.

      Motor

      Displacement 8.3 l. and 4.4 l. 47 % more or 3.9 l.
      Full power 160.3 kW and 55.9 kW 65 % more or 104.4 kW
      Effective power 154.4 kW and 50 kW 68 % more or 104.4 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum torque 915.2 Nm and 302.3 Nm 67 % more or 612.9 Nm

      Hydraulic system

      Pump bandwidth 326 l/min and 66 l/min 80 % more or 260 l/min

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 37.4 km/h and 20 km/h 47 % more or 17.4 km/h
      Maximum reverse gear 24.4 km/h and 20 km/h 18 % more or 4.4 km/h

      Neutral reasons:

      Sizes

      Wheelbase 2000 mm and 3300 mm
      Hinge axis maximum height 3165 mm and 5270 mm
      Between tyres width 1900 mm and 2702 mm
      Length with bucket on ground level 5070 mm and 9450 mm
      Height to cab upper part 2660 mm and 3370 mm

      Operation

      Working weight 5250 kg and 21043 kg
      Operating voltage 12 V and 24 V
      Rear axle oscillating 9 degrees and 25 degrees

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Aspiration natural aspiration and turbocharging
      Model 1104C-44 and QSC 8.3

      Hydraulic system

      Type of pump gear type pump and twin variable displacement piston pumps
      Overflow valve pressure 22001.2 kPa and 24993.5 kPa

      Gear box

      Transmission type Hydro-Static Transmission and smooth power shifting

      Images

      Sizes

      1. Length with bucket on ground level 5070 mm 1. Length with bucket on ground level 9450 mm
      2. Between tyres width 1900 mm 2. Between tyres width 2702 mm
      3. Height to cab upper part 2660 mm 3. Height to cab upper part 3370 mm
      4. Wheelbase 2000 mm 4. Wheelbase 3300 mm
      5. Clearance 410 mm 5. Clearance 470 mm
      6. Hinge axis maximum height 3165 mm 6. Hinge axis maximum height 5270 mm
      7. Unloading ground clearance at maximum lifting 2512 mm 7. Unloading ground clearance at maximum lifting 4034 mm
      9. Fork tines length 1200 mm 9. Fork tines length 1220 mm
      11. Maximum lifting height 3021 mm 11. Maximum lifting height 5160 mm