- Home/
- Comparison/
- Attached Equipment/
- JCB 411ZX vs. John Deere 444H
JCB 411ZX vs. John Deere 444H
6 reasons to buy JCB 411ZX:
Sizes
Clearance | 410 mm and 355 mm | 13 % more or 55 mm |
Operation
Transmission fluid volume | 85 l. and 12.5 l. | 85 % more or 72.5 l. |
Turn radius | 3605.8 mm and 4703 mm | 23 % less or 1097.2 mm |
Generator current strength | 75 amperes and 55 amperes | 27 % more or 20 amperes |
Static bucket tipping load | 3089 kg and 7267 kg | 57 % less or 4178 kg |
Static tipping forks load | 4170 kg and 4364 kg | 4 % less or 194 kg |
21 reasons to buy John Deere 444H:
Sizes
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Maximum lifting height | 3406 mm and 3021 mm | 11 % more or 385 mm |
Unloading ground clearance at maximum lifting | 2638 mm and 2512 mm | 5 % more or 126 mm |
Radius at maximum height and unloading | 1095 mm and 634 mm | 42 % more or 461 mm |
Operation
Rear differential fluid volume | 15 l. and 10.5 l. | 30 % more or 4.5 l. |
Front differential fluid volume | 15 l. and 9.5 l. | 37 % more or 5.5 l. |
Hydraulic system fluid volume | 106 l. and 85.2 l. | 20 % more or 20.8 l. |
Fuel Capacity | 180 l. and 100 l. | 44 % more or 80 l. |
Cooling system fluid volume | 19 l. and 15.5 l. | 18 % more or 3.5 l. |
Engine oil volume | 12.5 l. and 9.4 l. | 25 % more or 3.1 l. |
Motor
Full power | 86 kW and 55.9 kW | 35 % more or 30.1 kW |
Effective power | 82 kW and 50 kW | 39 % more or 32 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 441 Nm and 302.3 Nm | 31 % more or 138.7 Nm |
Displacement | 4.5 l. and 4.4 l. | 2 % more or 0.1 l. |
Hydraulic system
Lowering time | 2.6 sec and 3.2 sec | 19 % less or 0.6 sec |
Pump bandwidth | 136.3 l/min and 66 l/min | 52 % more or 70.3 l/min |
Gear box
Maximum reverse gear | 26.3 km/h and 20 km/h | 24 % more or 6.3 km/h |
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 40 km/h and 20 km/h | 50 % more or 20 km/h |
Neutral reasons:
Sizes
Between tyres width | 1900 mm and 2330 mm |
Height to cab upper part | 2660 mm and 3125 mm |
Wheelbase | 2000 mm and 2750 mm |
Hinge axis maximum height | 3165 mm and 3605 mm |
Length with bucket on ground level | 5070 mm and 6730 mm |
Operation
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 9 degrees and 24 degrees |
Working weight | 5250 kg and 9733 kg |
Motor
Manufacturer | JCB and John Deere |
Model | 1104C-44 and 4045T |
Torque measured at | 1400 rev / min and 1400 rev / min |
Aspiration | natural aspiration and turbocharging |
Hydraulic system
Lifting time | 5 sec and 5 sec |
Type of pump | gear type pump and piston pump |
Overflow valve pressure | 22001.2 kPa and 24850 kPa |
Gear box
Transmission type | Hydro-Static Transmission and powershift |
Images
Sizes
1. Length with bucket on ground level | 5070 mm | 1. Length with bucket on ground level | 6730 mm |
2. Between tyres width | 1900 mm | 2. Between tyres width | 2330 mm |
3. Height to cab upper part | 2660 mm | 3. Height to cab upper part | 3125 mm |
4. Wheelbase | 2000 mm | 4. Wheelbase | 2750 mm |
5. Clearance | 410 mm | 5. Clearance | 355 mm |
6. Hinge axis maximum height | 3165 mm | 6. Hinge axis maximum height | 3605 mm |
7. Unloading ground clearance at maximum lifting | 2512 mm | 7. Unloading ground clearance at maximum lifting | 2638 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3021 mm | 11. Maximum lifting height | 3406 mm |