- Home/
- Comparison/
- Attached Equipment/
- JCB 411ZX vs. Michigan L90-I
JCB 411ZX vs. Michigan L90-I
8 reasons to buy JCB 411ZX:
Sizes
Clearance | 410 mm and 400 mm | 2 % more or 10 mm |
Operation
Static bucket tipping load | 3089 kg and 9290 kg | 67 % less or 6201 kg |
Static tipping forks load | 4170 kg and 5000 kg | 17 % less or 830 kg |
Transmission fluid volume | 85 l. and 35 l. | 59 % more or 50 l. |
Turn radius | 3605.8 mm and 5910 mm | 39 % less or 2304.2 mm |
Generator current strength | 75 amperes and 45 amperes | 40 % more or 30 amperes |
Hydraulic system
Lifting time | 5 sec and 6.4 sec | 22 % less or 1.4 sec |
Lowering time | 3.2 sec and 3.5 sec | 9 % less or 0.3 sec |
19 reasons to buy Michigan L90-I:
Sizes
Unloading ground clearance at maximum lifting | 2810 mm and 2512 mm | 11 % more or 298 mm |
Radius at maximum height and unloading | 1050 mm and 634 mm | 40 % more or 416 mm |
Fork tines length | 1225 mm and 1200 mm | 2 % more or 25 mm |
Maximum lifting height | 3675 mm and 3021 mm | 18 % more or 654 mm |
Operation
Fuel Capacity | 200 l. and 100 l. | 50 % more or 100 l. |
Cooling system fluid volume | 38 l. and 15.5 l. | 59 % more or 22.5 l. |
Engine oil volume | 15 l. and 9.4 l. | 37 % more or 5.6 l. |
Front differential fluid volume | 27.5 l. and 9.5 l. | 65 % more or 18.0 l. |
Rear differential fluid volume | 27.5 l. and 10.5 l. | 62 % more or 17.0 l. |
Hydraulic system fluid volume | 193 l. and 85.2 l. | 56 % more or 107.8 l. |
Motor
Maximum torque | 556 Nm and 302.3 Nm | 46 % more or 253.7 Nm |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Displacement | 5.9 l. and 4.4 l. | 25 % more or 1.5 l. |
Full power | 108.1 kW and 55.9 kW | 48 % more or 52.2 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 32.7 km/h and 20 km/h | 39 % more or 12.7 km/h |
Maximum reverse gear | 32.7 km/h and 20 km/h | 39 % more or 12.7 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 2660 mm and 3050 mm |
Length with bucket on ground level | 5070 mm and 7180 mm |
Wheelbase | 2000 mm and 3000 mm |
Hinge axis maximum height | 3165 mm and 3835 mm |
Between tyres width | 1900 mm and 2525 mm |
Operation
Working weight | 5250 kg and 12550 kg |
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 9 degrees and 30 degrees |
Motor
Aspiration | natural aspiration and turbocharging |
Manufacturer | JCB and Cummins |
Model | 1104C-44 and 6 BT 5.9 |
Hydraulic system
Overflow valve pressure | 22001.2 kPa and 20477.4 kPa |
Gear box
Transmission type | Hydro-Static Transmission and Clark C270 powershift |
Images
Sizes
2. Between tyres width | 1900 mm | 2. Between tyres width | 2525 mm |
3. Height to cab upper part | 2660 mm | 3. Height to cab upper part | 3050 mm |
4. Wheelbase | 2000 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 410 mm | 5. Clearance | 400 mm |
6. Hinge axis maximum height | 3165 mm | 6. Hinge axis maximum height | 3835 mm |
7. Unloading ground clearance at maximum lifting | 2512 mm | 7. Unloading ground clearance at maximum lifting | 2810 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1225 mm |
11. Maximum lifting height | 3021 mm | 11. Maximum lifting height | 3675 mm |
1. Length with bucket on ground level | 5070 mm | 1. Length with bucket on ground level | 7180 mm |