- Home/
- Comparison/
- Attached Equipment/
- JCB 436 Waste master vs. John Deere 624H
JCB 436 Waste master vs. John Deere 624H
16 reasons to buy JCB 436 Waste master:
Sizes
Unloading ground clearance at maximum lifting | 4220 mm and 2858 mm | 32 % more or 1362 mm |
Radius at maximum height and unloading | 1254 mm and 1038 mm | 17 % more or 216 mm |
Clearance | 459 mm and 406 mm | 12 % more or 53 mm |
Maximum lifting height | 3818 mm and 3732 mm | 2 % more or 86 mm |
Operation
Transmission fluid volume | 34 l. and 27 l. | 21 % more or 7 l. |
Cooling system fluid volume | 35 l. and 22 l. | 37 % more or 13 l. |
Front differential fluid volume | 39 l. and 28 l. | 28 % more or 11 l. |
Rear differential fluid volume | 39 l. and 20 l. | 49 % more or 19 l. |
Hydraulic system fluid volume | 210 l. and 117 l. | 44 % more or 93 l. |
Generator current strength | 70 amperes and 55 amperes | 21 % more or 15 amperes |
Static bucket tipping load | 6731 kg and 10726.1 kg | 37 % less or 3995.1 kg |
Motor
Full power | 132.7 kW and 119 kW | 10 % more or 13.7 kW |
Maximum torque | 799.9 Nm and 780 Nm | 2 % more or 19.9 Nm |
Hydraulic system
Pump bandwidth | 410 l/min and 208.2 l/min | 49 % more or 201.8 l/min |
Unloading time | 1 sec and 1.4 sec | 29 % less or 0.4 sec |
Gear box
Maximum reverse gear | 26.5 km/h and 23.9 km/h | 10 % more or 2.6 km/h |
13 reasons to buy John Deere 624H:
Shovel
Brimmed bucket capacity | 2.3 m3 and 2.1 m3 | 9 % more or 0.2 m3 |
Breakout power | 123.3 kN and 153 kN | 19 % less or 29.7 kN |
Bucket capacity with top | 2.7 m3 and 2.4 m3 | 11 % more or 0.3 m3 |
Operation
Engine oil volume | 20 l. and 14 l. | 30 % more or 6 l. |
Fuel Capacity | 265 l. and 230 l. | 13 % more or 35 l. |
Turn radius | 5187 mm and 5900 mm | 12 % less or 713 mm |
Static tipping forks load | 6686 kg and 8288.9 kg | 19 % less or 1602.9 kg |
Motor
Effective power | 128 kW and 123 kW | 4 % more or 5 kW |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Displacement | 6.8 l. and 6.7 l. | 1 % more or 0.1 l. |
Hydraulic system
Lifting time | 5.8 sec and 5.9 sec | 2 % less or 0.1 sec |
Lowering time | 3 sec and 3.4 sec | 12 % less or 0.4 sec |
Gear box
Maximum forward speed | 39.5 km/h and 39 km/h | 1 % more or 0.5 km/h |
Neutral reasons:
Sizes
Between tyres width | 2594 mm and 2530 mm |
Length with bucket on ground level | 7720 mm and 7610 mm |
Height to cab upper part | 3344 mm and 3300 mm |
Wheelbase | 3000 mm and 3030 mm |
Fork tines length | 1220 mm and 1220 mm |
Operation
Working weight | 16265.8 kg and 13559.7 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 25 degrees and 26 degrees |
Tyre size | Michelin 20.5R25 XHA (L3) and 17.5-25 |
Motor
Manufacturer | Cummins and John Deere |
Model | QSB 6.7 and 6068H |
Power measured at | 2200 rev / min and 2200 rev / min |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | twin variable displacement piston pumps and piston pump |
Overflow valve pressure | 24993.5 kPa and 24850 kPa |
Gear box
Transmission type | smooth power shifting and powershift |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
1. Length with bucket on ground level | 7720 mm | 1. Length with bucket on ground level | 7610 mm |
2. Between tyres width | 2594 mm | 2. Between tyres width | 2530 mm |
3. Height to cab upper part | 3344 mm | 3. Height to cab upper part | 3300 mm |
4. Wheelbase | 3000 mm | 4. Wheelbase | 3030 mm |
5. Clearance | 459 mm | 5. Clearance | 406 mm |
7. Unloading ground clearance at maximum lifting | 4220 mm | 7. Unloading ground clearance at maximum lifting | 2858 mm |
9. Fork tines length | 1220 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3818 mm | 11. Maximum lifting height | 3732 mm |