vs.

      JCB 436HT Ultrahigh Lift vs. Michigan L30

      21 reasons to buy JCB 436HT Ultrahigh Lift:

      Sizes

      Unloading ground clearance at maximum lifting 4191 mm and 2810 mm 33 % more or 1381 mm
      Radius at maximum height and unloading 1068 mm and 760 mm 29 % more or 308 mm
      Fork tines length 1220 mm and 1050 mm 14 % more or 170 mm
      Maximum lifting height 5045 mm and 3450 mm 32 % more or 1595 mm
      Clearance 459 mm and 420 mm 8 % more or 39 mm

      Operation

      Engine oil volume 14 l. and 8 l. 43 % more or 6 l.
      Transmission fluid volume 32.2 l. and 24 l. 25 % more or 8.2 l.
      Front differential fluid volume 39 l. and 22 l. 44 % more or 17 l.
      Rear differential fluid volume 39 l. and 10 l. 74 % more or 29 l.
      Hydraulic system fluid volume 208.2 l. and 10 l. 95 % more or 198.2 l.
      Fuel Capacity 230.9 l. and 95 l. 59 % more or 135.9 l.
      Generator current strength 70 amperes and 45 amperes 36 % more or 25 amperes

      Motor

      Maximum torque 786.4 Nm and 276 Nm 65 % more or 510.4 Nm
      Cylinders number 6 and 4 33 % more or 2
      Displacement 5.9 l. and 3.9 l. 34 % more or 2.0 l.
      Full power 132 kW and 55.2 kW 58 % more or 76.8 kW
      Effective power 123 kW and 57.4 kW 53 % more or 65.6 kW

      Hydraulic system

      Pump bandwidth 264 l/min and 103 l/min 61 % more or 161 l/min
      Unloading time 1 sec and 1.3 sec 23 % less or 0.3 sec

      Gear box

      Maximum forward speed 37.8 km/h and 35.2 km/h 7 % more or 2.6 km/h
      Forward gears number 4 and 3 25 % more or 1

      9 reasons to buy Michigan L30:

      Shovel

      Breakout power 54.8 kN and 153 kN 64 % less or 98.2 kN

      Operation

      Cooling system fluid volume 105 l. and 34.1 l. 68 % more or 70.9 l.
      Static bucket tipping load 3690 kg and 7668 kg 52 % less or 3978 kg
      Static tipping forks load 4410 kg and 5428.1 kg 19 % less or 1018.1 kg
      Turn radius 5162.5 mm and 6620 mm 22 % less or 1457.5 mm

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Lifting time 5.4 sec and 5.9 sec 8 % less or 0.5 sec
      Lowering time 2.2 sec and 3.4 sec 35 % less or 1.2 sec

      Gear box

      Maximum reverse gear 35.2 km/h and 27 km/h 23 % more or 8.2 km/h

      Neutral reasons:

      Sizes

      Between tyres width 2597 mm and 1990 mm
      Height to cab upper part 3335 mm and 2780 mm
      Wheelbase 3000 mm and 2725 mm
      Hinge axis maximum height 4650 mm and 3590 mm
      Length with bucket on ground level 7282 mm and 5600 mm

      Operation

      Rear axle oscillating 21 degrees and 20 degrees
      Tyre size Michelin 20.5R25 XHA (L3) and 15.5-25 L-2
      Working weight 15925.2 kg and 5942.1 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Perkins
      Aspiration turbocharging and direct injection
      Model BTAA 5.9C and 4.2
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump twin variable displacement piston pumps and gear type pump
      Overflow valve pressure 24993.5 kPa and 14996.1 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type smooth power shifting and Clark 18000 Series full mesh automatic powershift transmission

      Images

      Sizes

      2. Between tyres width 2597 mm 2. Between tyres width 1990 mm
      3. Height to cab upper part 3335 mm 3. Height to cab upper part 2780 mm
      4. Wheelbase 3000 mm 4. Wheelbase 2725 mm
      5. Clearance 459 mm 5. Clearance 420 mm
      6. Hinge axis maximum height 4650 mm 6. Hinge axis maximum height 3590 mm
      7. Unloading ground clearance at maximum lifting 4191 mm 7. Unloading ground clearance at maximum lifting 2810 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1050 mm
      11. Maximum lifting height 5045 mm 11. Maximum lifting height 3450 mm
      1. Length with bucket on ground level 7282 mm 1. Length with bucket on ground level 5600 mm