vs.

      JCB 436HT Ultrahigh Lift vs. Michigan L50B

      23 reasons to buy JCB 436HT Ultrahigh Lift:

      Sizes

      Unloading ground clearance at maximum lifting 4191 mm and 2770 mm 34 % more or 1421 mm
      Clearance 459 mm and 380 mm 17 % more or 79 mm
      Radius at maximum height and unloading 1068 mm and 1040 mm 3 % more or 28 mm
      Maximum lifting height 5045 mm and 3550 mm 30 % more or 1495 mm

      Shovel

      Bucket capacity with top 2.4 m3 and 1.5 m3 37 % more or 0.9 m3
      Brimmed bucket capacity 2.1 m3 and 1.1 m3 48 % more or 1.0 m3

      Operation

      Engine oil volume 14 l. and 11 l. 21 % more or 3 l.
      Transmission fluid volume 32.2 l. and 7 l. 78 % more or 25.2 l.
      Front differential fluid volume 39 l. and 24 l. 38 % more or 15 l.
      Static tipping forks load 5428.1 kg and 6620 kg 18 % less or 1191.9 kg
      Rear differential fluid volume 39 l. and 24 l. 38 % more or 15 l.
      Hydraulic system fluid volume 208.2 l. and 106 l. 49 % more or 102.2 l.
      Fuel Capacity 230.9 l. and 170 l. 26 % more or 60.9 l.
      Generator current strength 70 amperes and 60 amperes 14 % more or 10 amperes
      Cooling system fluid volume 34.1 l. and 22 l. 35 % more or 12.1 l.

      Motor

      Maximum torque 786.4 Nm and 370 Nm 53 % more or 416.4 Nm
      Cylinders number 6 and 4 33 % more or 2
      Displacement 5.9 l. and 4 l. 32 % more or 1.9 l.
      Full power 132 kW and 71.6 kW 46 % more or 60.4 kW
      Effective power 123 kW and 67.9 kW 45 % more or 55.1 kW

      Hydraulic system

      Pump bandwidth 264 l/min and 31.7 l/min 88 % more or 232.3 l/min
      Unloading time 1 sec and 1.1 sec 9 % less or 0.1 sec

      Gear box

      Maximum forward speed 37.8 km/h and 36.4 km/h 4 % more or 1.4 km/h

      8 reasons to buy Michigan L50B:

      Sizes

      Fork tines length 1225 mm and 1220 mm 0 % more or 5 mm

      Shovel

      Breakout power 60.6 kN and 153 kN 60 % less or 92.4 kN

      Operation

      Static bucket tipping load 4900 kg and 7668 kg 36 % less or 2768 kg
      Turn radius 5400 mm and 6620 mm 18 % less or 1220 mm

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Lifting time 4.4 sec and 5.9 sec 25 % less or 1.5 sec
      Lowering time 3.3 sec and 3.4 sec 3 % less or 0.1 sec

      Gear box

      Maximum reverse gear 36.4 km/h and 27 km/h 26 % more or 9.4 km/h

      Neutral reasons:

      Sizes

      Hinge axis maximum height 4650 mm and 3710 mm
      Length with bucket on ground level 7282 mm and 6380 mm
      Between tyres width 2597 mm and 2140 mm
      Height to cab upper part 3335 mm and 3010 mm
      Wheelbase 3000 mm and 2750 mm

      Operation

      Rear axle oscillating 21 degrees and 12 degrees
      Tyre size Michelin 20.5R25 XHA (L3) and 15.5R25
      Working weight 15925.2 kg and 8101.2 kg
      Operating voltage 24 V and 24 V

      Motor

      Model BTAA 5.9C and VME TD 40GA
      Aspiration turbocharging and turbocharging
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Overflow valve pressure 24993.5 kPa and 26000.1 kPa
      Type of pump twin variable displacement piston pumps and Variable displacement piston pump, with load sensing, axial

      Gear box

      Transmission type smooth power shifting and VME powershift

      Images

      Sizes

      2. Between tyres width 2597 mm 2. Between tyres width 2140 mm
      3. Height to cab upper part 3335 mm 3. Height to cab upper part 3010 mm
      4. Wheelbase 3000 mm 4. Wheelbase 2750 mm
      5. Clearance 459 mm 5. Clearance 380 mm
      6. Hinge axis maximum height 4650 mm 6. Hinge axis maximum height 3710 mm
      7. Unloading ground clearance at maximum lifting 4191 mm 7. Unloading ground clearance at maximum lifting 2770 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1225 mm
      11. Maximum lifting height 5045 mm 11. Maximum lifting height 3550 mm
      1. Length with bucket on ground level 7282 mm 1. Length with bucket on ground level 6380 mm