vs.

      JCB 436HT vs. John Deere TC44H

      22 reasons to buy JCB 436HT:

      Sizes

      Clearance 459 mm and 355 mm 23 % more or 104 mm
      Unloading ground clearance at maximum lifting 2974 mm and 2676 mm 10 % more or 298 mm
      Maximum lifting height 3828 mm and 3490 mm 9 % more or 338 mm

      Shovel

      Breakout power 147 kN and 7988 kN 98 % less or 7841 kN
      Bucket capacity with top 2.4 m3 and 1.9 m3 21 % more or 0.5 m3
      Brimmed bucket capacity 2.1 m3 and 1.6 m3 24 % more or 0.5 m3

      Operation

      Hydraulic system fluid volume 210 l. and 106 l. 50 % more or 104 l.
      Fuel Capacity 230 l. and 180 l. 22 % more or 50 l.
      Cooling system fluid volume 35 l. and 19 l. 46 % more or 16 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Engine oil volume 14 l. and 12.5 l. 11 % more or 1.5 l.
      Transmission fluid volume 32.5 l. and 12.5 l. 62 % more or 20.0 l.
      Front differential fluid volume 39 l. and 15 l. 62 % more or 24 l.
      Rear differential fluid volume 39 l. and 15 l. 62 % more or 24 l.

      Motor

      Full power 132 kW and 86 kW 35 % more or 46 kW
      Effective power 123 kW and 82 kW 33 % more or 41 kW
      Maximum torque 786.4 Nm and 441 Nm 44 % more or 345.4 Nm
      Cylinders number 6 and 4 33 % more or 2
      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.

      Hydraulic system

      Pump bandwidth 264 l/min and 136.3 l/min 48 % more or 127.7 l/min
      Unloading time 1 sec and 1.5 sec 33 % less or 0.5 sec

      Gear box

      Maximum reverse gear 27 km/h and 26.3 km/h 3 % more or 0.7 km/h

      8 reasons to buy John Deere TC44H:

      Sizes

      Radius at maximum height and unloading 1258 mm and 1044 mm 17 % more or 214 mm

      Operation

      Turn radius 4703 mm and 5860 mm 20 % less or 1157 mm
      Static bucket tipping load 5983 kg and 12147 kg 51 % less or 6164 kg
      Static tipping forks load 4687 kg and 7669 kg 39 % less or 2982 kg

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Lifting time 5 sec and 5.9 sec 15 % less or 0.9 sec
      Lowering time 2.3 sec and 3.4 sec 32 % less or 1.1 sec

      Gear box

      Maximum forward speed 40 km/h and 37.9 km/h 5 % more or 2.1 km/h

      Neutral reasons:

      Sizes

      Wheelbase 3000 mm and 2750 mm
      Between tyres width 2597 mm and 2330 mm
      Height to cab upper part 3335 mm and 3125 mm
      Hinge axis maximum height 3996 mm and 3682 mm
      Length with bucket on ground level 6926 mm and 6969 mm
      Fork tines length 1220 mm and 1220 mm

      Operation

      Working weight 14882.8 kg and 10212 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 21 degrees and 24 degrees
      Tyre size 20.5R25 XHA (L3) and 17.5-25

      Motor

      Aspiration turbocharging and turbocharging
      Model BTAA 5.9C and 4045T
      Power measured at 2200 rev / min and 2200 rev / min
      Manufacturer Cummins and John Deere

      Hydraulic system

      Type of pump twin variable displacement piston pumps and piston pump
      Overflow valve pressure 24993.5 kPa and 24850 kPa

      Gear box

      Transmission type smooth power shifting and powershift
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      11. Maximum lifting height 3828 mm 11. Maximum lifting height 3490 mm
      1. Length with bucket on ground level 6926 mm 1. Length with bucket on ground level 6969 mm
      2. Between tyres width 2597 mm 2. Between tyres width 2330 mm
      3. Height to cab upper part 3335 mm 3. Height to cab upper part 3125 mm
      4. Wheelbase 3000 mm 4. Wheelbase 2750 mm
      5. Clearance 459 mm 5. Clearance 355 mm
      6. Hinge axis maximum height 3996 mm 6. Hinge axis maximum height 3682 mm
      7. Unloading ground clearance at maximum lifting 2974 mm 7. Unloading ground clearance at maximum lifting 2676 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1220 mm