- Home/
- Comparison/
- Attached Equipment/
- JCB 456HT Ultrahigh Lift vs. Michigan L90-I
JCB 456HT Ultrahigh Lift vs. Michigan L90-I
19 reasons to buy JCB 456HT Ultrahigh Lift:
Sizes
Unloading ground clearance at maximum lifting | 4034 mm and 2810 mm | 30 % more or 1224 mm |
Radius at maximum height and unloading | 1277 mm and 1050 mm | 18 % more or 227 mm |
Maximum lifting height | 5160 mm and 3675 mm | 29 % more or 1485 mm |
Clearance | 470 mm and 400 mm | 15 % more or 70 mm |
Shovel
Brimmed bucket capacity | 2.6 m3 and 1.7 m3 | 35 % more or 0.9 m3 |
Bucket capacity with top | 3.3 m3 and 2.1 m3 | 36 % more or 1.2 m3 |
Operation
Rear differential fluid volume | 51 l. and 27.5 l. | 46 % more or 23.5 l. |
Fuel Capacity | 320 l. and 200 l. | 37 % more or 120 l. |
Hydraulic system fluid volume | 215 l. and 193 l. | 10 % more or 22 l. |
Cooling system fluid volume | 40 l. and 38 l. | 5 % more or 2 l. |
Engine oil volume | 18.9 l. and 15 l. | 21 % more or 3.9 l. |
Generator current strength | 70 amperes and 45 amperes | 36 % more or 25 amperes |
Front differential fluid volume | 69 l. and 27.5 l. | 60 % more or 41.5 l. |
Motor
Full power | 160.3 kW and 108.1 kW | 33 % more or 52.2 kW |
Maximum torque | 915.2 Nm and 556 Nm | 39 % more or 359.2 Nm |
Displacement | 8.3 l. and 5.9 l. | 29 % more or 2.4 l. |
Hydraulic system
Lifting time | 5.8 sec and 6.4 sec | 9 % less or 0.6 sec |
Unloading time | 1.2 sec and 1.5 sec | 20 % less or 0.3 sec |
Gear box
Maximum forward speed | 37.4 km/h and 32.7 km/h | 13 % more or 4.7 km/h |
10 reasons to buy Michigan L90-I:
Sizes
Fork tines length | 1225 mm and 1220 mm | 0 % more or 5 mm |
Shovel
Breakout power | 119.9 kN and 152 kN | 21 % less or 32.1 kN |
Operation
Turn radius | 5910 mm and 7121 mm | 17 % less or 1211 mm |
Transmission fluid volume | 35 l. and 34 l. | 3 % more or 1 l. |
Static bucket tipping load | 9290 kg and 9493 kg | 2 % less or 203 kg |
Static tipping forks load | 5000 kg and 8314 kg | 40 % less or 3314 kg |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Hydraulic system
Lowering time | 3.5 sec and 4.1 sec | 15 % less or 0.6 sec |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum reverse gear | 32.7 km/h and 24.4 km/h | 25 % more or 8.3 km/h |
Neutral reasons:
Sizes
Hinge axis maximum height | 5270 mm and 3835 mm |
Length with bucket on ground level | 9450 mm and 7180 mm |
Between tyres width | 2702 mm and 2525 mm |
Height to cab upper part | 3370 mm and 3050 mm |
Wheelbase | 3300 mm and 3000 mm |
Operation
Working weight | 21043 kg and 12550 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 25 degrees and 30 degrees |
Tyre size | Michelin 23.5R25 XHA L3 and 20.5-25 |
Motor
Model | QSC 8.3 and 6 BT 5.9 |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and turbocharging |
Hydraulic system
Overflow valve pressure | 24993.5 kPa and 20477.4 kPa |
Gear box
Forward gears number | 4 and 4 |
Transmission type | smooth power shifting and Clark C270 powershift |
Images
Sizes
1. Length with bucket on ground level | 9450 mm | 1. Length with bucket on ground level | 7180 mm |
2. Between tyres width | 2702 mm | 2. Between tyres width | 2525 mm |
3. Height to cab upper part | 3370 mm | 3. Height to cab upper part | 3050 mm |
4. Wheelbase | 3300 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 470 mm | 5. Clearance | 400 mm |
6. Hinge axis maximum height | 5270 mm | 6. Hinge axis maximum height | 3835 mm |
7. Unloading ground clearance at maximum lifting | 4034 mm | 7. Unloading ground clearance at maximum lifting | 2810 mm |
9. Fork tines length | 1220 mm | 9. Fork tines length | 1225 mm |
11. Maximum lifting height | 5160 mm | 11. Maximum lifting height | 3675 mm |