vs.

      JCB 456HT vs. Michigan L30

      22 reasons to buy JCB 456HT:

      Sizes

      Radius at maximum height and unloading 1220 mm and 760 mm 38 % more or 460 mm
      Maximum lifting height 4194 mm and 3450 mm 18 % more or 744 mm
      Fork tines length 1220 mm and 1050 mm 14 % more or 170 mm
      Clearance 470 mm and 420 mm 11 % more or 50 mm
      Unloading ground clearance at maximum lifting 3069 mm and 2810 mm 8 % more or 259 mm

      Operation

      Rear differential fluid volume 51 l. and 10 l. 80 % more or 41 l.
      Front differential fluid volume 69 l. and 22 l. 68 % more or 47 l.
      Hydraulic system fluid volume 215 l. and 10 l. 95 % more or 205 l.
      Generator current strength 70 amperes and 45 amperes 36 % more or 25 amperes
      Fuel Capacity 320 l. and 95 l. 70 % more or 225 l.
      Engine oil volume 18.9 l. and 8 l. 58 % more or 10.9 l.
      Transmission fluid volume 34 l. and 24 l. 29 % more or 10 l.

      Motor

      Full power 160.3 kW and 55.2 kW 66 % more or 105.1 kW
      Effective power 154.4 kW and 57.4 kW 63 % more or 97.0 kW
      Maximum torque 915.2 Nm and 276 Nm 70 % more or 639.2 Nm
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Cylinders number 6 and 4 33 % more or 2
      Displacement 8.3 l. and 3.9 l. 53 % more or 4.4 l.

      Hydraulic system

      Pump bandwidth 326 l/min and 103 l/min 68 % more or 223 l/min
      Unloading time 1.2 sec and 1.3 sec 8 % less or 0.1 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Maximum forward speed 37.4 km/h and 35.2 km/h 6 % more or 2.2 km/h

      8 reasons to buy Michigan L30:

      Shovel

      Breakout power 54.8 kN and 150 kN 63 % less or 95.2 kN

      Operation

      Turn radius 5162.5 mm and 6630 mm 22 % less or 1467.5 mm
      Static bucket tipping load 3690 kg and 14493 kg 75 % less or 10803 kg
      Static tipping forks load 4410 kg and 11281 kg 61 % less or 6871 kg
      Cooling system fluid volume 105 l. and 40 l. 62 % more or 65 l.

      Hydraulic system

      Lifting time 5.4 sec and 5.8 sec 7 % less or 0.4 sec
      Lowering time 2.2 sec and 4.1 sec 46 % less or 1.9 sec

      Gear box

      Maximum reverse gear 35.2 km/h and 24.4 km/h 31 % more or 10.8 km/h

      Neutral reasons:

      Sizes

      Between tyres width 2702 mm and 1990 mm
      Height to cab upper part 3370 mm and 2780 mm
      Wheelbase 3300 mm and 2725 mm
      Hinge axis maximum height 4304 mm and 3590 mm
      Length with bucket on ground level 8520 mm and 5600 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 25 degrees and 20 degrees
      Tyre size Michelin 23.5R25 XHA L3 and 15.5-25 L-2
      Working weight 20143 kg and 5942.1 kg

      Motor

      Model QSC 8.3 and 4.2
      Power measured at 2200 rev / min and 2200 rev / min
      Aspiration turbocharging and direct injection

      Hydraulic system

      Type of pump twin variable displacement piston pumps and gear type pump
      Overflow valve pressure 24993.5 kPa and 14996.1 kPa

      Gear box

      Transmission type smooth power shifting and Clark 18000 Series full mesh automatic powershift transmission
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 8520 mm 1. Length with bucket on ground level 5600 mm
      2. Between tyres width 2702 mm 2. Between tyres width 1990 mm
      3. Height to cab upper part 3370 mm 3. Height to cab upper part 2780 mm
      4. Wheelbase 3300 mm 4. Wheelbase 2725 mm
      5. Clearance 470 mm 5. Clearance 420 mm
      6. Hinge axis maximum height 4304 mm 6. Hinge axis maximum height 3590 mm
      7. Unloading ground clearance at maximum lifting 3069 mm 7. Unloading ground clearance at maximum lifting 2810 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1050 mm
      11. Maximum lifting height 4194 mm 11. Maximum lifting height 3450 mm