- Home/
- Comparison/
- Attached Equipment/
- John Deere 624G vs. Michigan L90
John Deere 624G vs. Michigan L90
14 reasons to buy John Deere 624G:
Sizes
Clearance | 433 mm and 400 mm | 8 % more or 33 mm |
Hook radius at maximum lifting in unfolded state | 3368 mm and 2720 mm | 19 % more or 648 mm |
Unloading ground clearance at maximum lifting | 2865 mm and 2810 mm | 2 % more or 55 mm |
Fork tines length | 1372 mm and 1225 mm | 11 % more or 147 mm |
Operation
Turn radius | 5140 mm and 5835 mm | 12 % less or 695 mm |
Generator current strength | 95 amperes and 55 amperes | 42 % more or 40 amperes |
Static bucket tipping load | 9120.4 kg and 9870.2 kg | 8 % less or 749.8 kg |
Fuel Capacity | 249 l. and 185 l. | 26 % more or 64 l. |
Engine oil volume | 19 l. and 17 l. | 11 % more or 2 l. |
Motor
Effective power | 112 kW and 108.1 kW | 3 % more or 3.9 kW |
Maximum torque | 618 Nm and 549.1 Nm | 11 % more or 68.9 Nm |
Displacement | 6.8 l. and 5.5 l. | 19 % more or 1.3 l. |
Hydraulic system
Lifting time | 5.8 sec and 6.6 sec | 12 % less or 0.8 sec |
Pump bandwidth | 230.9 l/min and 202 l/min | 13 % more or 28.9 l/min |
21 reasons to buy Michigan L90:
Sizes
Maximum lifting height | 3675 mm and 3623 mm | 1 % more or 52 mm |
Hook height at maximum lifting in folded state | 6135 mm and 5600 mm | 9 % more or 535 mm |
Hook height at maximum lifting in unfolded state | 7090 mm and 6905 mm | 3 % more or 185 mm |
Hook radius at maximum lifting in folded state | 2030 mm and 1979 mm | 3 % more or 51 mm |
Radius at maximum height and unloading | 1050 mm and 936 mm | 11 % more or 114 mm |
Shovel
Breakout power | 119 kN and 121.3 kN | 2 % less or 2.3 kN |
Bucket capacity with top | 2.5 m3 and 2.3 m3 | 8 % more or 0.2 m3 |
Brimmed bucket capacity | 2.1 m3 and 2 m3 | 5 % more or 0.1 m3 |
Operation
Rear differential fluid volume | 29.5 l. and 19 l. | 36 % more or 10.5 l. |
Hydraulic system fluid volume | 140 l. and 102 l. | 27 % more or 38 l. |
Static tipping forks load | 5000 kg and 6904.6 kg | 28 % less or 1904.6 kg |
Manipulator static tipping load | 2200 kg and 4562.7 kg | 52 % less or 2362.7 kg |
Cooling system fluid volume | 53 l. and 25 l. | 53 % more or 28 l. |
Transmission fluid volume | 33 l. and 11 l. | 67 % more or 22 l. |
Front differential fluid volume | 32.5 l. and 28 l. | 14 % more or 4.5 l. |
Motor
Full power | 116.3 kW and 108 kW | 7 % more or 8.3 kW |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Hydraulic system
Unloading time | 1.5 sec and 1.7 sec | 12 % less or 0.2 sec |
Lowering time | 2.8 sec and 3.5 sec | 20 % less or 0.7 sec |
Gear box
Maximum forward speed | 40.1 km/h and 37.3 km/h | 7 % more or 2.8 km/h |
Maximum reverse gear | 29 km/h and 24.5 km/h | 16 % more or 4.5 km/h |
Neutral reasons:
Sizes
Length with forks on ground level | 7975 mm and 7185 mm |
Wheelbase | 3030 mm and 3000 mm |
Hinge axis maximum height | 3890 mm and 3810 mm |
Between tyres width | 2522 mm and 2490 mm |
Length with bucket on ground level | 7450 mm and 7170 mm |
Height to cab upper part | 3300 mm and 3030 mm |
Operation
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 26 degrees and 30 degrees |
Tyre size | 17.5-25 and 20.5R25 |
Working weight | 12632 kg and 12945.5 kg |
Motor
Manufacturer | John Deere and Volvo |
Model | 6068T and TD61G |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and turbocharging |
Hydraulic system
Type of pump | gear type pump kind and vane pumps |
Overflow valve pressure | 19305.3 kPa and 20511.9 kPa |
Gear box
Transmission type | powershift and Volvo BM HT131 |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
14. Hook radius at maximum lifting in folded state | 1979 mm | 14. Hook radius at maximum lifting in folded state | 2030 mm |
15. Hook radius at maximum lifting in unfolded state | 3368 mm | 15. Hook radius at maximum lifting in unfolded state | 2720 mm |
1. Length with bucket on ground level | 7450 mm | 1. Length with bucket on ground level | 7170 mm |
2. Between tyres width | 2522 mm | 2. Between tyres width | 2490 mm |
3. Height to cab upper part | 3300 mm | 3. Height to cab upper part | 3030 mm |
4. Wheelbase | 3030 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 433 mm | 5. Clearance | 400 mm |
6. Hinge axis maximum height | 3890 mm | 6. Hinge axis maximum height | 3810 mm |
7. Unloading ground clearance at maximum lifting | 2865 mm | 7. Unloading ground clearance at maximum lifting | 2810 mm |
9. Fork tines length | 1372 mm | 9. Fork tines length | 1225 mm |
10. Length with forks on ground level | 7975 mm | 10. Length with forks on ground level | 7185 mm |
11. Maximum lifting height | 3623 mm | 11. Maximum lifting height | 3675 mm |
12. Hook height at maximum lifting in folded state | 5600 mm | 12. Hook height at maximum lifting in folded state | 6135 mm |
13. Hook height at maximum lifting in unfolded state | 6905 mm | 13. Hook height at maximum lifting in unfolded state | 7090 mm |