vs.

      John Deere TC62H vs. JCB 456 Waste master

      5 reasons to buy John Deere TC62H:

      Shovel

      Breakout power 120.5 kN and 145 kN 17 % less or 24.5 kN

      Operation

      Engine oil volume 20 l. and 18.9 l. 5 % more or 1.1 l.
      Turn radius 5187 mm and 6630 mm 22 % less or 1443 mm

      Hydraulic system

      Lowering time 3 sec and 4.1 sec 27 % less or 1.1 sec

      Gear box

      Maximum forward speed 39.5 km/h and 37.4 km/h 5 % more or 2.1 km/h

      21 reasons to buy JCB 456 Waste master:

      Sizes

      Clearance 470 mm and 406 mm 14 % more or 64 mm
      Unloading ground clearance at maximum lifting 4030 mm and 2907 mm 28 % more or 1123 mm
      Radius at maximum height and unloading 1320 mm and 1278 mm 3 % more or 42 mm

      Shovel

      Bucket capacity with top 3.5 m3 and 2.7 m3 23 % more or 0.8 m3
      Brimmed bucket capacity 2.8 m3 and 2.3 m3 18 % more or 0.5 m3

      Operation

      Static bucket tipping load 9688 kg and 9755 kg 1 % less or 67 kg
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Fuel Capacity 370 l. and 265 l. 28 % more or 105 l.
      Cooling system fluid volume 40 l. and 22 l. 45 % more or 18 l.
      Transmission fluid volume 34 l. and 27 l. 21 % more or 7 l.
      Front differential fluid volume 69 l. and 27 l. 61 % more or 42 l.
      Rear differential fluid volume 51 l. and 21 l. 59 % more or 30 l.
      Hydraulic system fluid volume 215 l. and 117 l. 46 % more or 98 l.

      Motor

      Effective power 146.9 kW and 119 kW 19 % more or 27.9 kW
      Maximum torque 902 Nm and 785 Nm 13 % more or 117 Nm
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Displacement 8.3 l. and 6.8 l. 18 % more or 1.5 l.
      Full power 161.1 kW and 128.3 kW 20 % more or 32.8 kW

      Hydraulic system

      Unloading time 1.2 sec and 1.7 sec 29 % less or 0.5 sec
      Pump bandwidth 410 l/min and 208.2 l/min 49 % more or 201.8 l/min

      Gear box

      Maximum reverse gear 24.4 km/h and 23.9 km/h 2 % more or 0.5 km/h

      Neutral reasons:

      Sizes

      Between tyres width 2615 mm and 2702 mm
      Height to cab upper part 3300 mm and 3410 mm
      Wheelbase 3003 mm and 3300 mm
      Hinge axis maximum height 4005 mm and 5310 mm
      Length with bucket on ground level 7671 mm and 9470 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 20.5-25 and Michelin 23.5R25 XHA L3
      Rear axle oscillating 26 degrees and 25 degrees
      Working weight 13849 kg and 21627 kg

      Motor

      Power measured at 2200 rev / min and 2200 rev / min
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Manufacturer John Deere and Cummins
      Model 6068H and 6CT 8.3C

      Hydraulic system

      Type of pump piston pump and twin variable displacement piston pumps
      Overflow valve pressure 24850 kPa and 24993.5 kPa
      Lifting time 5.8 sec and 5.8 sec

      Gear box

      Transmission type powershift and smooth power shifting
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      4. Wheelbase 3003 mm 4. Wheelbase 3300 mm
      5. Clearance 406 mm 5. Clearance 470 mm
      6. Hinge axis maximum height 4005 mm 6. Hinge axis maximum height 5310 mm
      7. Unloading ground clearance at maximum lifting 2907 mm 7. Unloading ground clearance at maximum lifting 4030 mm
      1. Length with bucket on ground level 7671 mm 1. Length with bucket on ground level 9470 mm
      2. Between tyres width 2615 mm 2. Between tyres width 2702 mm
      3. Height to cab upper part 3300 mm 3. Height to cab upper part 3410 mm