- Home/
- Comparison/
- Attached Equipment/
- Kawasaki 65TM-2 vs. JCB 408ZX
Kawasaki 65TM-2 vs. JCB 408ZX
20 reasons to buy Kawasaki 65TM-2:
Sizes
Fork tines length | 1219.2 mm and 1200 mm | 2 % more or 19.2 mm |
Clearance | 445 mm and 410 mm | 8 % more or 35 mm |
Maximum lifting height | 3705 mm and 3021 mm | 18 % more or 684 mm |
Unloading ground clearance at maximum lifting | 2760 mm and 2517 mm | 9 % more or 243 mm |
Radius at maximum height and unloading | 1275 mm and 612 mm | 52 % more or 663 mm |
Operation
Front differential fluid volume | 20 l. and 9.5 l. | 52 % more or 10.5 l. |
Rear differential fluid volume | 20 l. and 10.5 l. | 47 % more or 9.5 l. |
Hydraulic system fluid volume | 100 l. and 85.2 l. | 15 % more or 14.8 l. |
Fuel Capacity | 175 l. and 100 l. | 43 % more or 75 l. |
Cooling system fluid volume | 42.2 l. and 15.5 l. | 63 % more or 26.7 l. |
Engine oil volume | 14.2 l. and 9.4 l. | 34 % more or 4.8 l. |
Motor
Effective power | 99.9 kW and 50 kW | 50 % more or 49.9 kW |
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Maximum torque | 519.3 Nm and 302.3 Nm | 42 % more or 217.0 Nm |
Displacement | 5.9 l. and 4.4 l. | 25 % more or 1.5 l. |
Hydraulic system
Lowering time | 2.9 sec and 3.2 sec | 9 % less or 0.3 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 37.2 km/h and 30 km/h | 19 % more or 7.2 km/h |
Maximum reverse gear | 37.2 km/h and 30 km/h | 19 % more or 7.2 km/h |
7 reasons to buy JCB 408ZX:
Operation
Transmission fluid volume | 85 l. and 30 l. | 65 % more or 55 l. |
Turn radius | 3605.8 mm and 5710 mm | 37 % less or 2104.2 mm |
Generator current strength | 75 amperes and 50 amperes | 33 % more or 25 amperes |
Static bucket tipping load | 3089 kg and 7690 kg | 60 % less or 4601 kg |
Static tipping forks load | 1819.4 kg and 5840 kg | 69 % less or 4020.6 kg |
Hydraulic system
Pump bandwidth | 66 l/min and 60.9 l/min | 8 % more or 5.1 l/min |
Lifting time | 5 sec and 5.8 sec | 14 % less or 0.8 sec |
Neutral reasons:
Sizes
Wheelbase | 2900 mm and 2000 mm |
Hinge axis maximum height | 3885 mm and 3142 mm |
Length with bucket on ground level | 7180 mm and 5000 mm |
Between tyres width | 2405 mm and 1752.6 mm |
Height to cab upper part | 3270 mm and 2615.2 mm |
Operation
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 12 degrees and 9 degrees |
Tyre size | 20.5x25-12PR (L-2) and 12.5x20 |
Working weight | 11510 kg and 4840 kg |
Motor
Manufacturer | Cummins and JCB |
Model | B5.9-C and 1104C-44 |
Torque measured at | 1400 rev / min and 1400 rev / min |
Aspiration | turbocharging and natural aspiration |
Hydraulic system
Type of pump | gear type pump and gear type pump |
Overflow valve pressure | 19098.5 kPa and 22001.2 kPa |
Gear box
Transmission type | powershift transmission and Hydro-Static Transmission |
Images
Sizes
7. Unloading ground clearance at maximum lifting | 2760 mm | 7. Unloading ground clearance at maximum lifting | 2517 mm |
9. Fork tines length | 1219.2 mm | 9. Fork tines length | 1200 mm |
11. Maximum lifting height | 3705 mm | 11. Maximum lifting height | 3021 mm |
1. Length with bucket on ground level | 7180 mm | 1. Length with bucket on ground level | 5000 mm |
2. Between tyres width | 2405 mm | 2. Between tyres width | 1752.6 mm |
3. Height to cab upper part | 3270 mm | 3. Height to cab upper part | 2615.2 mm |
4. Wheelbase | 2900 mm | 4. Wheelbase | 2000 mm |
5. Clearance | 445 mm | 5. Clearance | 410 mm |
6. Hinge axis maximum height | 3885 mm | 6. Hinge axis maximum height | 3142 mm |